Redarc Monocrystalline Manuale utente
Monocrystalline
Solar Panels
THE MONOCRYSTALLINE SOLAR PANEL
REDARC Monocrystalline Solar Panels are highly efficient with a robust design. A tempered glass
coating and a sturdy double channel aluminium frame ensure that our panels will withstand harsh
road conditions and extreme weather conditions.
Each panel is tested at time of manufacture to conform to CE standards, so you can be sure that the
panel output is exactly as described in its specification.
WARNING & SAFETY INSTRUCTIONS
This appliance is not intended for use by persons (including children) with reduced physical, sensory
or mental capabilities, or lack of experience and knowledge, unless they are supervised or have been
instructed on how to use the appliance by a person responsible for their safety. Children should be
supervised to ensure that they do not play with the appliance.
Do NOT use the Solar Panel to charge non-rechargeable batteries. Doing so may result in harm to
the user and/or damage to the Regulator and/or Solar Panel. Only use the Solar Panel for charging
Standard Lead Acid, Calcium content, Gel & AGM type 12V batteries.
All lead acid batteries produce harmful, explosive gases. The Battery should be mounted in a well
ventilated area, as far as possible from any ignition sources. Do NOT smoke when in the vicinity of
the battery under charge.
Battery acid is a harmful substance. Care should be taken when working with lead acid batteries,
if the acid comes into contact with your eyes or skin, immediately wash the affected area with cold
running water and seek medical assistance. Eye protection and gloves should be worn when handling
lead acid batteries.
The Solar Panel will achieve best results when proper battery maintenance is regularly performed.
This includes but is not limited to checking water and specific gravity levels of the battery.
Warning! Check the manufacturers data for your battery and ensure that the ‘Absorption’ voltage of
the profile you select does not exceed the manufacturers recommended maximum charging voltage.
If the ‘Absorption’ voltage for your battery type is too high, please select another charging profile.
1
SAL.FOR.Instruction Manual Monocrystalline Solar Panels – DOC389 – Version3
CONTENTS
The Monocrystalline Solar Panel 1
Panel Features 2
50watt Monocrystalline Solar Panel 3
Specifications 3
80watt Monocrystalline Solar Panel 4
Specifications 4
120watt Monocrystalline Solar Panel 5
Specifications 5
150watt Monocrystalline Solar Panel 6
Specifications 6
150watt Monocrystalline SlimLine Solar Panel 7
Specifications 7
System Installation 8
Angle to the Sun 8
Aluminium Adjustable Mounts 9
ABS Plastic Mountings 10
System Wiring 13
Wiring Multiple Panels 13
Wiring Multiple Panels of Different Types 13
Standard BMS Installation 14
Wiring Precautions 15
Parallel and Series Connections 15
Accessories 16
PANEL FEATURES
Strong Aluminium
Frame
Tempered Glass
Coating
Monocrystalline
Construction
Diode Protected
Junction Box
Quality MC4
Connectors
2
50WATT MONOCRYSTALLINE SOLAR PANEL
SPECIFICATIONS
540mm
645mm
35mm
Model SMR1050 Short circuit Current 3.00A
Construction Monocrystalline Tolerance ±3%
Peak Power 50W Frame Anodized Aluminium
Net Weight 4.5kg Cable length 750mm
Dimensions 645x540x35mm Operating temp. -40° to +85°C
Max power Voltage 18.00V Std. test conditions
AM1.5 1000W/m² 25°C
Max power Current 2.78A Manufactured in China
Open circuit Voltage 22.20V Certification CE
3
80WATT MONOCRYSTALLINE SOLAR PANEL
SPECIFICATIONS
Model SMR1080 Short circuit Current 4.80A
Construction Monocrystalline Tolerance ±3%
Peak Power 80W Frame Anodized Aluminium
Net Weight 6.5kg Cable length 800mm
Dimensions 963x540x35mm Operating temp. -40° to +85°C
Max power Voltage 18.00V Std. test conditions
AM1.5 1000W/m² 25°C
Max power Current 4.45A Manufactured in China
Open circuit Voltage 22.25V Certification CE
540mm
963mm
35mm
4
120WATT MONOCRYSTALLINE SOLAR PANEL
SPECIFICATIONS
Model SMR1120 Short circuit Current 7.22A
Construction Monocrystalline Tolerance ±3%
Peak Power 120W Frame Anodized Aluminium
Net Weight 9.5kg Cable length 800mm
Dimensions 963x808x35mm Operating temp. -40° to +85°C
Max power Voltage 18.50V Std. test conditions
AM1.5 1000W/m² 25°C
Max power Current 6.50A Manufactured in China
Open circuit Voltage 22.50V Certification CE
808mm
963mm
35mm
5
6
150WATT MONOCRYSTALLINE SOLAR PANEL
SPECIFICATIONS
Model SMR1150 Short circuit Current 8.80A
Construction Monocrystalline Tolerance ±3%
Peak Power 150W Frame Anodized Aluminium
Net Weight 11.0kg Cable length 800mm
Dimensions 1210x808x35mm Operating temp. -40° to +85°C
Max power Voltage 18.50V Std. test conditions
AM1.5 1000W/m² 25°C
Max power Current 8.11A Manufactured in China
Open circuit Voltage 22.50V Certification CE
1210mm
35mm 808mm
7
150WATT MONOCRYSTALLINE SLIMLINE SOLAR PANEL
SPECIFICATIONS
Model SMR1150-SL Short circuit Current 9.00A
Construction Monocrystalline Tolerance ±3%
Peak Power 150W Frame Anodized Aluminium
Net Weight 12.0kg Cable length 800mm
Dimensions 1480x670x35mm Operating temp. -40° to +85°C
Max power Voltage 18.40V Std. test conditions
AM1.5 1000W/m² 25°C
Max power Current 8.20A Manufactured in China
Open circuit Voltage 22.20V Certification CE
670mm
1480mm
35mm
SYSTEM INSTALLATION
ANGLE TO THE SUN
REDARC solar panels will perform at their peak with the panel face angled directly towards the sun.
In practice this is not always achievable, so REDARC recommend having your panels face NORTH at
an angle of between 20° and 40° from the ground. This will ensure the best total output from your
panel across the course of the day, no matter what season.
In the southern hemisphere, the sun is always in the NORTH half of our sky. As such facing your
panel NORTH ensures the best angle to the sun for a fixed panel across the course of the day.
The optimal angle from ground of the panel is around 30°. Anywhere between 10° and 40° ensures
good power generation across the course of the day.
Angle to Sun
between 10°
and 40°
GROUND
N
WE
S
Path of
the Sun
always
NORTH
Panel
facing
NORTH
8
SYSTEM INSTALLATION
ALUMINIUM MOUNTS
Aluminium angled mounting kits are perfect for mounting solar panels to your Caravan or
Camper-trailer. Aluminium mounting kits allow adjustment of the angle of the panel to the sun. The
frame can be angled when camping and laid flat again ready for travel. Aluminium angled mounting
kits are suitable for mounting panels to Camper-trailers or Caravans.
mm SMI9004 SMI9005
A26.5 37
B20 20
C30 30
D518 712
E23 23
F50 50
G39 39
H20 20
I20 20
Jx6 x6
ANGLE ADJUSTMENT
The angle of the panel to the sun is achieved by simply removing the threaded knob from the
wingnut and replacing the knob in a mounting hole corresponding with the angle you require. See
below for a visual representation.
J
9
Indice
Altri manuali Redarc Pannello solare
