Regent Lighting Solutions Echo Manuale utente

INSTALLATION INSTRUCTIONS

ALL CONNECTIONS TO BE CARRIED OUT BY A QUALIFIED ELECTRICIAN

Echo

Ensure there is a power supply (Main supply) from the wall.

1. Select required position for the luminaire in the normal operating position indicated onto the wall.

DO NOT CONNECT THE FITTING LIVE

Echo

ŸBe sure the electricity to the system you

are working on is isolated.

ŸIf the main supply power (live) is on, it will

cause damage to the luminaire.

ŸElectrical: 220 ~ 240V AC 50 Hz

ŸOverall weight: 1 kg including control gear

ŸControl gear: 220-240V 50 Hz

ŸIP rating according to IEC 60598-1:

-Optical compartment: IP65

-Gear compartment: IP65

ŸAmbient temperature: Ta 36ºC

ŸMounting: Wall mounted.

OPEN FITTING

PLEASE READ CAREFULLY BEFORE STARTING INSTALLATION.

DO NOT PLUG

(CONNECT) WHEN

LIVE AS IT WILL CAUSE

DAMAGE TO THE

LUMINAIRE.

2. Open and remove the back/mounting plate

from the fitting by removing the grub x4 M4

screws on the wall box and remove the wall

plate . using an allen key

Select the required position for the luminaire and

mark the mounting points on the selected

surface. Ensure that the wall plate is level before

drilling the mounting holes.

WARNING

Electronic Control Device

ELECTRIC SHOCK

HAZARD

This equipment is to be

serviced by trained

personnel only.

Wall Plate

Wall Box

DO NOT PLUG

(CONNECT) WHEN

LIVE AS IT WILL CAUSE

DAMAGE TO THE

LUMINAIRE.

x2 M4 Grub screws

Wall Plate

31mm

42.35mm

204

116

www.regentlight.co.za

Replaceable

electrical

components

by end user

Allen Key

www.regentlight.co.za

ALL CONNECTIONS TO BE CARRIED OUT BY A QUALIFIED ELECTRICIAN

PLEASE READ CAREFULLY BEFORE STARTING INSTALLATION.

Regent Lighting reserves the right to change specications modify designs and discontinue items without

incurring obligation and whilst every effort is made to ensure that descriptions, specications and other

information in this catalogue are correct, no warranty is given in respect thereof and the company shall not be

liable for any error therein.

WARNING: TO AVOID FIRE, SHOCK OR DEATH

TURN OFF POWER AT CIRCUIT BREAKER OR FUSE AND TEST THAT THE POWER IS OFF BEFORE WIRING

ALL LUMINAIRES SUPPLIED AND TO BE INSTALLED ABOVE AND BELOW 5 METERS ARE IN COMPLIANCE WITH SANS

60598 SECTION 3.5.6 ACCORDING TO THE MANUFACTURER GUARANTEE AND WARRANTY

Electrical products can cause death, injury, or damage to

property. Installation of this product must be carried out by a

qualied electrician, in compliance with SANS 10142 or

corresponding regulations of the country of installation. On

completion of installation, the Certicate of Compliance must

be updated.

Echo

WARNING

Electronic/Magnetic Control Device

3 - 13 MAIN REEF SERVICE ROAD, CORNER

SPRINGBOK AND MAIN REEF ROAD, INDUSTRIA,

JOHANNESBURG. SOUTH AFRICA.

TEL : +27 11 474 0171

www.regentlight.co.za

REGENT LIGHTING A DIVISION

OF WAHL INDUSTRIES.

Save These Instructions for Future Reference

ELECTRIC SHOCK

HAZARD

This equipment is to be

serviced by trained

personnel only.

December 2019

www.regentlight.co.za

This product should be installed by a competent person i.e. Qualified electrician.

This product requires a constant stable electrical supply 220V - 240V VAC 50Hz - alternating current.

The product must be regularly maintained, including the replacement of lamps/LED timeously.

This product could be HAZARDOUS if not used correctly, it could cause electric shock, serious bodily harm or death.

This product is not a toy, please keep away from children.

This product may contain small parts that can be swallowed.

Use only the correct light bulbs/LED as stipulated on the carton for the product.

Any modifications of this product after supply will result in the guarantee being void.

Spare parts may become unavailable over time.Items can vary slightly from the picture on the carton

Coastal humidity can affect the longevity of the light fitting over time.

Be sure to follow the steps in the order given.

Read instructions carefully.

Ensure there is no trapped or pinched

insulation before fastening the wall

plate.

Mount the wall plate to the selected

surface through fastening M6 Stainless

Steel screws with rubber washers into the

wall plugs already inserted into the wall.

Ensure the wall plate is level vertically

and horizontally.

3. After the mounting holes are drilled

place the wall plugs inside the mounting

holes and feed the electrical cable

through the grommet on the wall plate.

MOUNTING THE FITTING ASSEMBLING

ELECTRICAL CONNECTION

x4 M6 Screws

Power Cable

Grommet

Wall Plugs

Mounting Surface

Connector Block

Gaskets

DO NOT PLUG

(CONNECT) WHEN

LIVE AS IT WILL CAUSE

DAMAGE TO THE

LUMINAIRE.

6. T o in st al l or ch an ge t h e l a m p / L E D ,

re mo v e/ re pl a c e t he e nd c ap s on th e

top/bottom of the fitting, taking care of any

loose parts which may fall.

Ensure the gaskets and grommet is securely in

place before fastening the end caps and the

wall box.

Ensure the new lamp/LED is the correct wattage

and is located in the lamp/LED holder.

Ensure that there are no exposed conductors,

loose strands or trapped insulation.

Ensure the fitting is securely fastened to the wall plat.

5. Place the connector block inside the wall box and

align and fasten the fitting to the wall plate via the

four stainless steel grub screws which were removed

in the first step.

To protect the ingress protection, ensure the

mounting plate gasket is securely in place before

fixing the fitting to the mounting plate.

Ensure that there are no exposed conductors, loose

strands or trapped insulation.

E A R T H – ( G r e e n / Y e l l o w ) t o

terminal marked E.

SWITCHED LIVE – (Red or Brown) to

terminal marked L

NEUTRAL – (Black or Blue) to

terminal marked N

4. Connect the Switched Live (S/L),

Neutral (N) and Earth (E) cable(s)

to the connector block in the wall

box of the fitting.

Replaceable

electrical

components

by end user

Replaceable

electrical

components

by end user

Luminaire

-Red/Brown (+)

-Green/Yellow

-Black/Blue (-)

Main electrical supply

Red/Brown-

Green/Yellow-

Black/Blue-

220 ~ 240V AC 50 Hz

DO NOT PLUG

(CONNECT) WHEN

LIVE AS IT WILL CAUSE

DAMAGE TO THE

LUMINAIRE.

Replaceable

electrical

components

by end user

Replaceable

electrical

components

by end user

Important Safety Instructions Important Safety Instructions

www.regentlight.co.za

This product is available as

a single or double element.

This installation manual is

applicable for both.

7. Switch on power supply.

Replaceable

electrical

components

by end user

Single

Double

Allen Key

x4 M5 cap screws

x4 M4 Grub

screws

Altri manuali Regent Lighting Solutions Luce esterna

Regent Lighting Solutions

Regent Lighting Solutions Challenger Mini Manuale utente

Regent Lighting Solutions

Regent Lighting Solutions Plato Manuale utente

Regent Lighting Solutions

Regent Lighting Solutions Halo Manuale utente

Regent Lighting Solutions

Regent Lighting Solutions Lumina Mini Manuale utente

Regent Lighting Solutions

Regent Lighting Solutions T -Line Manuale utente

Regent Lighting Solutions

Regent Lighting Solutions IRIS Series Manuale utente

Regent Lighting Solutions

Regent Lighting Solutions Bedford Bollard - Plinth Mounted Manuale utente

Regent Lighting Solutions

Regent Lighting Solutions Europa Pro Manuale utente

Regent Lighting Solutions

Regent Lighting Solutions Europa Pro Post Top Manuale utente

Regent Lighting Solutions

Regent Lighting Solutions Kazo Manuale utente

Regent Lighting Solutions

Regent Lighting Solutions Columbia Manuale utente

Regent Lighting Solutions

Regent Lighting Solutions Bilux Inground Manuale utente

Regent Lighting Solutions

Regent Lighting Solutions Penza Manuale utente

Regent Lighting Solutions

Regent Lighting Solutions Bedford Bollard - Buried Manuale utente

Manuali Luce esterna popolari di altre marche

Sealey

Sealey LED37 Manuale utente

nordlux

nordlux VEJERS Guida utente

SImx

SImx ELITE LED LHTC637 Manuale utente

GEV

GEV CAROLINE 10833 Manuale utente

NEBO

NEBO NEB-LSP-0020 Manuale utente

WE-EF

WE-EF PFL540 LED Manuale utente

Lindby

Lindby 9949029 Manuale utente

HEPER

HEPER DOGO Side LW6048.585-US Istruzioni per l'installazione e il funzionamento

HEPER

HEPER LW8034.003-US Istruzioni per l'installazione e il funzionamento

Maretti

Maretti VIBE S 14.6080.04.A Manuale utente

BEGA

BEGA 84 253 Manuale

HEPER

HEPER MINIMO Istruzioni per l'installazione e il funzionamento

LIGMAN

LIGMAN BAMBOO 3 Manuale utente

Maretti

Maretti TUBE CUBE WALL 14.4998.04 Manuale utente

Maxim Lighting

Maxim Lighting Carriage House VX 40428WGOB Manuale utente

urban ambiance

urban ambiance UQL1273 Manuale utente

TotalPond

TotalPond 52238 Manuale utente

Donner & Blitzen

Donner & Blitzen 0-02661479-2 Manuale utente