Rego RG-MLP80B Manuale utente
RG-MLP80B
User Manual
V1.00
Mobile Label Printer
Precautions.............................................Ⅰ6.Settings.................................................................8
Safety Precautions..................................Ⅱ6.1Basic Settings....................................................8
Operation Precautions............................Ⅲ6.2Self-test............................................................10
Storage Precautions................................Ⅳ6.3Self-test Information........................................11
7. Interface Connection............................................12
1. Accessories........................... ....... ...... .1用7.1USB Connection...............................................12
2. Printer Part List....................................2 7.2Serial Connection.............................................12
3.OLED Display.........................................37.3Bluetooth Connection.....................................14
4.Preparation Before Use........................47.4WI-FIConnection..............................................15
4.1Battery Installation...........................4 8. Specification and Features..................................16
4.2Battery Charge..................................5 9. WI-FI Wireless Module Setting and User guide.. .20
4.3Paper Installation..............................610. Appendix ...........................................................37
5.Basic Operation.....................................7
5.1Power On...........................................7
5.2Power Off...........................................7
5.3Feed Paper.........................................7
Content
About the manuals
We thank you for your use of RG-MLP80B mobile label printer.
Below is the introduction for all the manuals for RG-MLP80B, so that you will know how to use and develop it.
1.
《
RG-MLP80B User Manual
》
: Provide detailed hardware/physical/technical information for the printer.
2.
《
REGO Thermal Printer Technical Manual
》
: Provide the command information for developers.
3.
《
RG-SetTools User Manual
》
: Please refer to the manual to use the tool and setup the printer parameters.
Notice:
·In order to improve the function and performance of the product, REGO reserves the right to change the software and
hardware specifications in the manuals without prior notice.
·If you find any errors or omissions in the information mentioned in these manuals, please feedback to us or our dealer, and it
will be highly appreciated.
·Without the prior written permission of REGO, the contents of the relevant manuals attached to this product shall not be
reproduced or transmitted, transcribed, stored in a retrieval system, or translated into other languages in any form or in any
manner.
Precautions
Statement
This product is Class A. In a normal environment, this product may cause radio
interference. In this case, users may be required to take practical measures
against interference.
Ⅰ
Be sure to use the specified battery and power supply provided by our company. Otherwise it may cause fire, explosion or
damage printer, meanwhile, the battery also may be damaged.
Don’t put battery into the fire, don’t disassemble or heat the battery, don’t be short circuit, it may cause fire, explosion or
damage printer. Meanwhile, the battery also may be damaged.
If the printer would not be used for a long time, be sure to remove the battery, otherwise the battery may leak liquid which
is corrosive liquid. If improper operation causes battery leak liquid, and it pastes in the skin or clothes, please rinse it by
clean water. And if pastes in the eyes, please rinse them thoroughly by clean water and see a doctor.
Please do not open the paper case cover when it is printing or just when printing is finished, do not touch the print head
with hand or body, overheat may cause scald.
Please do not touch the print head surface and connection cables, otherwise the static electricity may damage the print
head.
Safety Precautions
Ⅱ
Water or other liquid should not be spilled into the printer, also the printer should not be appeared in the rain, or else may
cause printer damage.
Please do not open the paper case cover when it is printing, otherwise the printer may work improperly.
If printer is using Serial or USB connection to work, should not unplug the Serial or USB cable, or else some printing data
may be lost. When printer is using Bluetooth connection to work, the distance of communication should be within 10
meters, and when using WIFI, the distance of communication should be within 30 meters indoors and 100 meters outdoors.
Otherwise the printer doesn’t print or prints abnormally.
Too high（over 45℃）or too low（below 5℃） environment temperature and too high (over 85％) or too low (below 20％)
environment humidity both effect the printing quality.
The printer paper roll with poor quality or stored for too long time also may reduce the printing quality even damage the
printer.
Under the black mark detecting mode, the printer requires that the pre-printed black mark is accordant with the printing
rule of black mark (please refer to details in Chapter 4.2), otherwise the black mark can not be detected correctly. While
under the label detecting mode, the printer shall be accordant with the printing rule of label detection (please refer to
details in Chapter 4.3).
Operation Precautions
Ⅲ
It would be better use up the power of the battery before charge up it, as it can ensure the using life of the battery. Usually
the life the battery is: it only has 80% capacity after charge and discharge 500 times. The battery performance will be
decreased with the increase of the charge and discharge times.
The printer should be placed in such an environment that the temperature is between-40℃and 70℃, and the relative
humidity is between 10% and 95%.
Normal thermal paper, label and black mark paper can’t be kept too long, if you need to keep the receipt or label for a long
period, please choose long-term effective thermal paper or label. The thermal paper and label should be keep away from
high temperature environment and point-blank sunshine, please store it where is away from light if it has been open.
If the printer will be stored for a long time, please be sure to remove the battery and store it separately. Otherwise may
damage the battery and printer.
The battery shall be charged upon it stored more than 3 months, otherwise it may be damaged by self-discharging.
Storage Precautions
Ⅳ
1. Accessories
USB Cable
RG-MLP80B Printer
Paper Roll
Carrying Case
Battery
Power Convertor
1
Carry case (Optional)
①Paper Case Cover ②Paper Slot-out ③USB ④RS232 ⑤Setup Button
⑥Feeding Button ⑦Power Button ⑧OLED Display ⑨Power ⑩Paper Cover Switch
MLP80A 打印机
2. Printer Parts List
1
2
B : printer model RG-MLP80B
N: normal thermal paper : battery power level
U: upper black mark paper
D: down black mark paper
L: label paper
3. OLED Display
: Bluetooth connection
: WI-FI connection
3
L B
Work normal
www.regotek.com
Notice:The display content will be different from
customer’s different settings. Below is the meaning for
each symbol:
4.1Battery Installation
①Make sure to place the battery into the battery housing in the direction of the 2 arrows
②Close the battery cover.
4.2 Battery Charge
Plug the USB cable with power convertor into the USB outlet of the printer.
In power off status, the printer's display screen will display the charging situation, when the battery logo at upper right corner
of the display disappeared, means the completion of charging.
4. Preparation Before Use
4
Indice
