Rehan Electronics Looky+ Manuale utente
User manual
Bedienungsanleitung
Gebruiksaanwijzing
Manuel d’ útilisation
Manuel del usuario
Manuale dúso
Looky+ logo is a trademark of Rehan Electronics
First Edition (January 2010) V1.0
English ............................................5
Deutsch ......................................... 17
Nederlands ..................................... 29
Français......................................... 41
Español.......................................... 53
Italiano.......................................... 65
Manufactured by:
Rehan Electronics Ltd.
Aughrim Road,
Carnew,
Co-Wicklow, Ireland
www.lookyplus.com
Table of Contents
1 Introduction..........................................................................6
2 General description Looky+...................................................6
3 Intended use ........................................................................6
4 Maintenance..........................................................................7
4.1 Battery maintenance .......................................................7
5 Installation - batteries............................................................8
6 Handle..................................................................................8
7 Controls................................................................................8
7.1 Switching the Looky+ on and off.....................................8
7.2 Digital zoom ...................................................................9
7.3 Selecting reading modes...................................................9
7.4 Freeze image...................................................................10
7.5 Advanced settings............................................................10
7.5.1 Advanced settings - X button........................................10
7.5.2 Advanced settings - Z button........................................11
8 Internal memory of the Looky+..............................................11
9 Charging instructions...........................................................12
10 Troubleshoot.......................................................................13
11 Specifications......................................................................14
12 Discarding the Looky+..........................................................15
13 Warranty regulations...........................................................15
14 Contact information supplier...............................................15
1 Introduction
Congratulations with the purchase of your Looky+! In this manual you will find a
detailed description of all the functions of the Looky+. If you still have any queries
after reading this manual, please contact your supplier (see the back of the manual
for contact details).
2 General description Looky+
Front
Back
3 Intended use
This device is solely used for displaying enlarged representations of text,
photographic material and objects. When the Looky+ is used for any purpose other
than the intended use, the CE regulation will not apply.
Caution: do not, under any circumstances, perform maintenance
or repairs to the device –always ask a producer approved
technician to do this. Warranty will be voided if the Looky+ is
attempted to be repaired by anyone other than a technician
approved of by the producer.
handle
screen
camera
LED lighting
4 Maintenance
Only use accessories for the Looky+ that are approved of by the producer.
4.1 Battery maintenance
Remove the batteries from the Looky+ if you do not intend to use the device
for an extended period of time. This will improve the longevity of the batteries.
Batteries are sensitive to over-charging. It is recommended to only charge the
batteries when they are completely drained.
Chargeable NiMh batteries have an auto discharge that strongly depends on
the temperature of the environment (e.g. never leave your batteries in a car
that is parked in direct sunlight).
New NiMh batteries must be charged several times before reaching their
nominal capacity.
Charge NiMh batteries at least once every 6 months.
The average lifespan of a rechargeable battery is usually 300 charging cycles,
but this depends on the use. Total capacity will slowly decrease after multiple
charging cycles.
Charge the batteries in a well ventilated environment.
5 Installation –batteries
1. Remove the lid from the battery compartment by pressing down on the arrow
and moving the lid in the direction of the arrow.
2. Place the first battery at the back of the battery compartment.
3. Now place the second battery.
Note: charge the batteries before using your Looky+! See the
charging instructions on page 12.
6 Handle
The handle of the Looky+ is closed on delivery. You can use the Looky+ with the
closed handle by placing it directly on the text. When you extend the handle you
can use the Looky+ like a magnifier. You now have the possibility to view objects or
read texts.
It is also possible to use the Looky+ as an aid during writing. To do so you will need
to extend the handle fully. When you now press the handle flat to the surface of
the table, the screen will rise to an angle. The space underneath the Looky+ that is
created in this way can be used to aid you during writing.
7 Controls
7.1 Switching the Looky+ on and off
To switch the Looky+ on, keep button 1 pressed for 1 second. You will hear a
low pitched tone followed by a high pitched tone. The screen is now active.
To switch the Looky+ off, keep button 1 pressed until you hear a high pitched
tone followed by a low pitched tone. The screen of the Looky+ will darken and
the device will switch off.
7.2 Digital zoom
Press the yellow button (button 2) to digitally enlarge the image on the
screen.
By pressing the yellow button (button 2) you can switch between the 4 zoom
presets.
By pressing the yellow button (button 2) after having selected the highest
magnification, you will return to the lowest magnification.
7.3 Selecting reading modes
Press the blue button (button 3) to select different reading modes.
By pressing the blue button (button 3) you will cycle through the following
reading modes: Full Colour mode with LED lighting –White/Black - Black/White
–Yellow/Blue –Yellow/Black.
Keep the blue button (button 3) pressed for several seconds to switch to the
full colour mode without LED lighting. When you now press the blue button
(button 3) briefly, you will switch back to the previously used reading mode –
the lights will also turn back on.
1
3
2
Indice
Lingue:
Altri manuali Rehan Electronics Lettore di e-book
