Reliable PRONTO PLUS 300CS Manuale utente

PORTABLE STEAM CLEANING SYSTEM WITH MOP

SISTEMA PORTÁTIL DE LIMPIEZA A VAPOR CON FREGONA

INSTRUCTION MANUAL

GUIDE D’UTILISATION

MANUAL DE INSTRUCCIONES

PRONTO PLUS 300CS

SYSTÈME DE NETTOYAGE À VAPEUR PORTABLE AVEC MOP

ENGLISH 04

FRANÇAIS 15

ESPAÑOL 27

PRONTO PLUS 300CS

HAND-HELD STEAM CLEANER

INSTRUCTION MANUAL

ENGLISH

RELIABLE. RIGHT THERE WITH YOU.

At Reliable, we do what we love, and take pride in doing it right.

You want what’s best for the people, places and things that matter

in your life – from where you live to what you wear. So do we. From

the start, we approach every product with a craftsman’s attention

to detail and passion for making it right. Quality, functionality,

design and customer service play an equally important part in

delivering what’s right for you. The Reliable 300CS portable

steam cleaner and mop loosens and removes tough dirt on

surfaces and floors. Just add water to harness the power of

steam. Plug it in, turn it on, and in seconds the 300CS will change

the way you clean.

For your safety and to fully enjoy the advantages of this product,

please take a few minutes to read all the important safeguards

and care instructions. Keep this manual handy and review the

product warranty for your reference.

IMPORTANT SAFETY REQUIREMENTS

When using an electric appliance, basic precautions should always be followed,

including the following:

READ ALL INSTRUCTIONS BEFORE USING THIS STEAMER

WARNING: Danger of scalding

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY:

• This product is designed for domestic use only.

• Do not use outdoors.

• Do not leave the Pronto 300CS unattended while turned on. Unplug the

electrical cord when not in use and before servicing.

• Do not allow to be used as a toy. Close attention is necessary when used

near children, pets or plants.

• The Pronto 300CS is not intended for use by young children or inﬁrm

persons without supervision.

• Young children should be supervised to ensure that they do not play with

the Pronto 300CS.

• Never direct steam towards people, animals or plants, or equipment containing

electrical components.

• Do not immerse the Pronto 300CS into water or other liquids.

• Do not use with damaged cord or plug. If the Pronto 300CS is not

working as it should, has been dropped, damaged, left outdoors, or immersed

into water, contact the distributor before continuing use. If the power supply

cord is damaged, it must be replaced by the manufacturer.

• Do not pull or carry by cord, use cord as a handle, close a door on the cord, or pull

cord around sharp edges or corners. Keep cord away from heated surfaces.

• Do not use extension cords or outlets with inadequate current carrying capacity.

• Unplug after use. Do not unplug by pulling on cord. To unplug, grasp the

plug, not the cord.

• Do not handle plug or any part of the Pronto 300CS with wet hands or

operate without shoes.

• Do not insert any objects into openings. Do not use with any opening blocked.

• Do not use without microﬁber pad in place.

• Do not use on stairs.

• Store your Pronto 300CS indoors in a cool, dry area.

• Keep your work area well lighted.

• Never put cleaning detergents into the Pronto 300CS. This will make the

operation unsafe and damage the unit.

• Use only as described in this manual. Use only manufacturer’s

recommended accessories.

SAVE THESE INSTRUCTIONS IN A SAFE

PLACE FOR FUTURE REFERENCE

PARTS

A. Water Tank (250ml)

B. Water Tank Release Button

C. Main Body

D. Power Indicator Light (Blue)

E. Extension Rod

F. Mop Head

G. Attachment Release Button

H. Steam Adjustment

I. Steam Release Button

J. Power Cord

K. Steam Nozzle

THE FOLLOWING INFORMATION IS PROVIDED FOR SERVICE BY A QUALIFIED

ELECTRICIAN ONLY:

Rated voltage: 100V, W0021 ,ZH06

This appliance must be grounded. Use only the proper type outle

t when plugging in

the appliance, do not attemt to override the ground wire feature.

ASSEMBLY

Remove all components from the packaging.

Insert the into the cleaner main body until it locks into position.

USE

BEFORE YOU BEGIN CLEANING

1. Remove the clean water tank up and out from the steam cleaner’s main body.

2. 1 .

. Brass Brush

. 2x Nylon Brush

1. 2. 3. 4. 5.

3. Push the tank cover up and remove the tank lid (Figure 2).

4. Fill the tank (Figure 3). Note: Do not exceed the max 250ml capacity.

5. Return the water tank cover to the water tank (Figure 4).

6. Return the water tank and click it into the original position (Figure 5).

IMPORTANT: Always unplug the cleaner when adding water or changing a

textile pad.

NOTE: Wash the textile pad prior to use to remove any lint.

ACCESSORY INSTALLATION

BEFORE YOU BEGIN CLEANING

1. Jet Nozzle Installation:

- Align the nozzle with the air outlet head at the front of the main unit,

then rotate it until the nozzle is firmly attached in place (figure 1).

2. Accessory Brush Installation:

- Attach the brush accessory on the nozzle. Note that the direction of the

elbow of the small brush is as shown in the figure, facing downward (figure 2).

1. 2.

3. Extension Rod Installation:

- When it is necessary to clean high, hard to reach places or mopping the floor,

install the extension rod.

- Align the extension rod with the head of the machine, push it into place and

gently rotate the extension rod firmly on the unit until it clicks into place

(figure 3).

4. Mop Head Installation:

- In the same way, the mop head can be connected with the extension rod, and

the extension rod can be connected with the nozzle. Gently twist and click

into place (figure 4).

3. 4.

3. Wall Bracket Installation:

- Align the wall bracket where you would

like it placed on your wall using a level.

Mark placement using a pencil.

- Using a Phillips head screwdriver, screw

the wall mount directly into drywall. If you

have inserted an anchor, insert the screw

through the wall mount and into the plastic

anchors.

- Turn clockwise until there is a firm

resistance.

NOTE: If you are screwing your bracket into a

wall with studs, drill a whole in the drywall

that is roughly the same diameter as the

anchor. Insert the anchor into the hole until it

is flush with the wall.

STEAM CLEANING

NOTE: When replacing any accessories, make sure the machine is powered

off and no steam is ejected. The machine needs to cool for 15 minutes to

prevent risk of burn.

IMPORTANT: Do not use the mop attachment without a microfiber pad

attached to the floor head.

NOTE: Do not use the carpet glide when cleaning hard floors.

1. After confirming that the power supply is correct, plug in the power supply,

the power indicator light is on, and the machine will begin to heat up.

2. After about 25 seconds, the machine is ready for use. Press the steam switch

and the steam will be ejected immediately.

3. According to different cleaning requirements, you can adjust the steam with

the "+" and "-" buttons on the control panel until you reach the desired steam

amount.

NOTE: Do not aim steam at people, pets, plants or any other electrical

appliances during use to avoid burns or damage to the machine.

4. Please pay attention to the amount of water in the tank when you use it. When

there is no water in the tank or the water is too low to allow the pump to

absorb water, please refer to the page on how to fill the machine.

NOTE: Do not operate the machine at any time without water in the tank.

Indice

Altri manuali Reliable Pulitore a vapore

Reliable

Reliable EnviroMate PROEP1000 Manuale utente

Reliable

Reliable Enviromate E5 Manuale utente

Reliable

Reliable 5100CJ Manuale utente

Reliable

Reliable VIVIO 500GC Manuale utente

Reliable

Reliable 7000 SERIES Manuale utente

Reliable

Reliable Steamboy T1 Manuale utente

Reliable

Reliable Enviromate T630 Manuale utente

Reliable

Reliable i500 Manuale utente

Reliable

Reliable EnviroMate PRONTO P7 Manuale utente

Reliable

Reliable PRONTO 100CH Manuale utente

Reliable

Reliable DASH 100GH Manuale utente

Reliable

Reliable STEAMBOY PRO 300CU Manuale utente

Reliable

Reliable Enviromate E3 Manuale utente

Reliable

Reliable PRONTO 200CS Manuale utente

Reliable

Reliable Steamboy T1 Manuale utente

Reliable

Reliable EnviroMate PRO EP1000 Manuale utente

Reliable

Reliable EnviroMatePRONTO P7 Manuale utente

Reliable

Reliable EnviroMate PRO EP1000 Manuale utente

Reliable

Reliable The EnviroMate BRIO Manuale utente

Reliable

Reliable i700B Manuale utente

Reliable

Reliable PRONTO 100CH Manuale utente

Reliable

Reliable 5100CD Manuale utente

Reliable

Reliable 4100CJ Manuale utente

Reliable

Reliable Enviromate E5 Manuale utente

Manuali Pulitore a vapore popolari di altre marche

Oreck

Oreck STEAM-IT STEAM100LRH Manuale utente

Beautural

Beautural YPZ-146 Manuale utente

MPM

MPM MZP-02 Manuale utente

Electrolux

Electrolux Refine 500 Manuale utente

Kärcher

Kärcher SC 3 Premium Manuale utente

Shark

Shark PRO Steam & Spray Istruzioni operative e di manutenzione

Jula

Jula 802-337 Manuale utente

Haan

Haan Floor Sanitizer MS-30 Manuale utente

Black & Decker

Black & Decker HSM13E1 Manuale utente

HOFFEN

HOFFEN GS-1231 Manuale utente

POLTI

POLTI VAPORETTO SYSTEME PRO Manuale utente

eta

eta AQUASIM PRO Manuale utente

Maxwell

Maxwell MW-3715 G Manuale utente

VAPamore

VAPamore Primo MR-100 Manuale

Bestron

Bestron AZQ016 Manuale utente

Nilfisk-ALTO

Nilfisk-ALTO Steamtec 312 Manuale utente

Tempo di saldi

Tempo di saldi SPINSCRUBBER Manuale utente

DOMENA

DOMENA HYGIAFLOR Manuale utente