Relianeering AB 3 Simple – Easy – Smart
Safety instructions
• The SES Logger must only be used with an accelerometer
(IEPE) 100 mV/g and connected to the logger with a BNC
connector.
• The SES Logger must only be charged with a 5V DC USB
charger using a Micro USB cable.
• The SES Logger must not be disassembled.
• The SES Logger must not be used or stored in hot/humid,
explosive or ammable environments or close to strong magnetic
elds.
• The SES-logger must not be disassembled. No guarantee is
valid if the logger has been disassembled.
• Relianeering AB take no responsibility for any other use than
described in this manual.
Package content
SES Logger: HW-SES-KIT01
• 1 pc HW-SES Logger, SES Logger instrument
• 1 pc HW-SES-SEN, IEPE Accelerometer 100 mV/g
• 1 pc HW-SES-SEN-MTB, MIL to BNC cable
• 1 pc HW-SES-Z-ADP, Adapter sensor to stud
• 1 pc HW-SES-Z-USB, Micro USB cable for charging
• 1 pc HW-SES-Z-CASE, Plastic case for the kit
• 1 pc Instruction manual
