Renau SKT T-2268 Manuale utente

INSTRUCTION MANUAL

2022

6.8” SMART KITCHEN TIMER

T-2268

SKT

SMART KITCHEN TIMER

We Do More Than Design, We Invent

The Kitchen

Timer of the

Future Has

Arrived

SKT

Smart Kitchen Timer (SKT) Instruction Manual

About the SKT

Safety and General Information

Accessing the Conguration Tool

Creating a Food Group

Creating an Item

Pairing SKTs

Creating a Transferable Item

Creating Job Aids

Sending Conguration to the SKT

Glossary

Accessing and Navigating the SKT Menu

Uploading/Downloading Conguration Files

Adding a Gateway and Wireless Sensor Modules

Operating the SKT

6-7

10-11

16-17

19-20

The Smart KitchenTimerfeatures a durable 1280×480 displayalong with an incredibly

fast quad-core ARM Cortex A-7 microprocessor. As a result, the SKT oers superior

display capabilities when compared to our competitors. Congurable in either

horizontal or vertical orientation, the SKT is an extremely versatile food service timer

which can be mounted and used in many dierent areas of the kitchen. These areas

include the grill, retherm station, fryer, hot/cold holding bins and prep table. What’s

more, the SKT can even be used for front of house tasks! Mounting the unit is simple

with the included bracket. The Smart Kitchen Timer can also be embedded in various

pieces of equipment and areas of the kitchen.

When in Holding Mode, each screen displays 9 items in horizontal orientation and

up to 8 in vertical orientation. When in Cook Mode, the left panel displays up to 4

items and up to 12 active timers on the right panel. In both modes you can scroll

through items, with up to 1000 programmable items total per unit. Use the timer as

a standalone or connect up to 7 additional units for added functionality such as the

ability to transfer items from a cook timer to a hold timer. Chiey, with the ability to

wirelessly program the SKT through PC or laptop the customization, adaptability, and

value provided are unrivaled.

Looking to monitor temperature or humidity as well? Pair a Gateway and up to 20

Wireless Sensor Modules for the ultimate freshness timer! Furthermore, when

connected to the Renau Cloud the SKT interfaces with our Smart Kitchen System

allowing it to be monitored and programmed remotely from anywhere in the world

with a Wi-Fi connection!

Are you ready to start building your very own connected kitchen? Our sleek 6.8″ Smart

Kitchen Timer provides a much needed alternative to the big, unruly, and expensive

eyesores that have become so common in the kitchen. Bring your kitchen into the

future with Renau’s T-2268 Smart Kitchen Timer!

• Durable and glove safe 6.8” touch screen

• Compatible with Renau’s Wireless Sensor Modules

• Multi-language support

• Simple wireless conguration

• Customizable action messages

• Congurable task reminders

• Extensive library of icons with the ability to upload your own

• Transfer items between cook and hold timers

• Customizable day parts

• Congurable in vertical and horizontal orientation

• Job aids

• Use as a standalone unit or connect up to 7 additional SKTs

• And much more!

Renau’s T-2268 6.8” touchscreen cook/hold Smart Kitchen Timer (SKT)

gives food service operators total oversight of their operations while

guaranteeing freshness and consistency to their customers.

Features Include:

About the SKT

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a commercial environment.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at his own expense.

Clean only with a damp cloth. No detergents or substances containing alcohols or solvents may

be used to clean this device.

This device meets the emission and immunity requirements of PN-EN IEC 55014-1: 2021 on the

EU market.

Safety and General Information

Cleaning and Care:

General:

Caution:

Accessing the Conguration Tool

The Conguration Tool is accessed through your browser. It’s used to add and change

programming for the SKT. In the Conguration Tool you may create food groups, items, job aids,

devices, as well as add Wireless Sensor Modules and Gateways.

1. Connecting for the rst time: Connect the included power supply to the back of the

unit and insert the plug into a wall outlet. Initial power up may take up to 30 seconds.

Once the Smart Kitchen Timer has powered on, rotate the screen by tapping on the blue

button until the desired orientation is set. Once nished, tap “Next.” Continue with steps

2-6.

Reconnecting to the Conguration Tool: Hold the “RENAU” logo in the main screen,

enter the PIN number, Click on “Setup”, and nally select “Recongure Device.” Continue

with steps 2-6.

Warning: You must use the included power supply, or a Renau approved replacement.

Use of a third-party power supply or any other replacement not approved by Renau will

void the warranty.

2. Select the desired device operation mode:

Connected: Allows for communication between multiple SKT’s. If this is the main

connected SKT, select “Master.” Otherwise, select “Slave.” If selecting Slave, refer to pages

10-11 on how to establish a Master/Slave relationship. If you will be adding a Gateway or

Sensor Module, the SKT must be used in connected mode.

Standalone: Allows for the SKT to work as a single standalone device with reduced setup

requirements. Once congured, Standalone Devices do not require a WiFi dongle inserted

at all times.

3. The SKT should now display a screen with an SSID, an IP Address, and a Conguration

Tool PIN.

Note: Before getting started, ensure that the Wi-Fi Dongle provided in the packaging is inserted

into the USB port on the SKT.

Note: The preprogrammed PIN number for all new units is 4444. If you would like to change this

number, you may do so later in the SKT menu.

Accessing the Conguration Tool (cont.)

4. Open the Wi-Fi settings in your computer and connect to the Wi-Fi network matching the SSID.

If your computer is currently using Wi-Fi to access the internet, you will no longer have an

internet connection during conguration. If you are connected to the internet via Ethernet

cable, you will not lose your connection.

Note: When connecting your PC to the SSID displayed on the SKT you may see that initially

the network is locked. If this is the case, simply close the network selection window, wait a few

seconds, and then reopen it until the network is open.

5. After the WiFi connection has been established open a web browser and enter the IP address

listed on the SKT screen into the browser bar to access the Conguration Tool.

Tip: It is recommended that you enable either private browsing or incognito mode on your

browser in order to avoid any possible caching issues with cookies. The Conguration Tool has

been optimized for Google Chrome and Safari browsers.

Note: The SKT should remain on the SSID screen for the duration of programming. If at any

point during programming through the Conguration Tool the SKT is powered down or you exit

the SSID screen, the SKT will lose its connection. To return to the SSID screen, access the menu

on the SKT and locate “Recongure Device” inside the “Setup” tab. If you accidentally skipped

ahead to the “Device Assignment” or “Conguration Summary” page, simply tap the “Back”

button on the SKT until you return to the SSID screen. Reconnect the SKT to the Conguration

Tool to continue.

6. Login with the PIN provided on the SKT

to access the Conguration Tool.

(Pin # will be unique each new session.)

7. You will not land in the Conguration Tool dashboard.

To help familiarize yourself with the Conguration Tool, follow the “Tutorial Wizard” on the home

page. You can also nd instructional videos on the renau.com website.

Creating a Food Group

The SKT allows for the programming of 16 groups with up to 4 groups per SKT. Food Groups

are useful for navigating larger menus by grouping and categorizing items which are similar or

related.

1. Click “Food Groups” in the “Components” side menu

2. Click “+ Add Group,” then enter the desired group name and group label before saving by

clicking the oppy disk icon.

3. Repeat as necessary for any additional Food Groups

Note: Group Labels will display on the SKT with the given Group Label. When deselected

they will appear gray and when selected they will appear green.

Creating an Item

The SKT allows for the programming of up to 1000 items on a single device, and up to 8 duty

cycles and messages fora standard item. Items can be anythingfrom food items and ingredients

to tasks and events. To create a new item, rst access the Conguration Tool, click “Items” in

the “Components” side menu, then click “Add Item” to begin the item creation process. Before

continuing, decide whether you would like to create a standard timer, a Daily Based Timer, or a

Continuous Timer.

Standard Timer: This is the default timer when creating a new item. A standard timer will count

down from the set total time, display the desired alert message(s), and then complete once the

nal message is cleared by the user.

1. First, enter the desired item name.

2. Click the “+” button under the message label, enter the desired cook/hold time, enter the

message you would like displayed upon timer completion and select “Create.” Repeat as

necessary for any additional duty cycles.

Tip: You can also manage all of your programmed messages through the “Messages” tab in

the side menu. Adding messages in this menu also provides the option to add the same

message translated to the desired language.

3. Click the question mark under “Add or Select Icon” and either select an icon from the

database or upload your own by accessing the “Icons” tab.

4. Select the group you would like to associate the item with or select “Non-Group.”

Tip: If you would rather have an item visible on the SKT screen at all times, selecting Non-

Group would be the preferred option.

5. Lastly, save your changes by clicking the oppy disk icon.

Daily Based Timer: This creates a timer for which an alert will be displayed every day at the

specied time. You also have the ability to select multiple times of the day for which you would

like to receive the alert.

Continuous Timer: Selecting this option will create a timer that will repeat at a specied interval.

You must rst clear the triggered alert message before the timer will automatically reset.

Pairing SKTs

The SKT allows for the pairing of up to 7 Slave units with a Master. The Slave units do not need to

be individually programmed. You will create congurations for all paired SKT’s using the Master

by connecting it to the Conguration Tool and creating individual Devices to be assigned as

stations for the Slave units. To use SKT’s in a Master/Slave relationship, you must have a WiFi

dongle inserted into the USB port of all devices at all times.

1. To start, be sure that all SKT’s are congured in the “Connected” operating mode. To

do this, enter the “Setup” tab in the SKT menu, tap “Recongure Device”, and select

“Connected” as the operating mode. Do this on all units you wish to pair.

2. Select “Master” as the device type on the primary SKT (normally this would be the unit

you plan on using as a cook timer) and select “Slave” for the remaining units.

Note: There can only be one Master device in a setup.

3. At this point you will leave the Slave unit(s) alone and continue by connecting the Master

to the Conguration Tool.

4. Once the Master is connected to the Conguration Tool, proceed with programming all of

your items not just for the Master but for the Slave unit(s) as well. When nished, click the

“+” under “Devices” on the side menu, set the desired device conguration for the Master

device, click “Next Step”, and populate the mock screen as desired with the appropriate

items. Once nished, click “Save Device”. Repeat the last step but this time create Devices

for all Slave units. When nished, click “Send to Device” on the side menu.

Indice

Altri manuali Renau Timer

Renau

Renau T-2268 Manuale utente

Manuali Timer popolari di altre marche

Intermatic

Intermatic P1131 Manuale utente

Learning Resources

Learning Resources Time Tracker mini Manuale utente

CEBEK

CEBEK I-215 Manuale utente

Somogyi

Somogyi home TS MD 5 Manuale utente

Profile

Profile 010200280 Manuale utente

Gizmo

Gizmo T4 Manuale utente

Tekmar

Tekmar Timer 031 Manuale utente

Daikin

Daikin DST301B61 Manuale utente

sisel

sisel ENDA ETM2432 Manuale utente

B&Q

B&Q TE103 Manuale operativo e di manutenzione

Hozelock

Hozelock AC Plus 2700 Manuale utente

GIC

GIC Eliro V7DDSS3Eliro V7DFTS3 Manuale utente

Tork

Tork TU40 Manuale utente

Emos

Emos EMT400F Manuale utente

FarmTek

FarmTek Polaris Manuale utente

Maximum

Maximum CRONUS Manuale utente

Uberhaus

Uberhaus TD133B Manuale utente

Clas Ohlson

Clas Ohlson 31-3766 Manuale utente