Renesas RTD120D-EVK Manuale utente

Quickstart Guide

R36UH0001EU0100 Rev.1.0 Page 1

The Thermopile CO2 Detector Evaluation Kit (EVK)

provides an easy way to evaluate the RTD120D dual-

channel thermopile in a CO2 gas detector application.

It operates stand-alone or with a PC running CO2

Detector Evaluation Software, making the CO2

concentration and intermediate data available for

plotting, logging, processing, exporting and analysis

using software available. The software and user

manual for the kit can be downloaded from:

www.renesas.com/rtd120d-evk.

Kit Contents

▪ CO2 Detector EVK Board

▪ Detachable LCD Module

▪ USB to Micro-USB Cable

▪ Shorting jumpers (2)

▪ Quickstart Guide (this document)

Introduction

The Thermopile CO2 Detector Evaluation Kit is

designed for evaluation of the Renesas’ RTD120D

dual thermopile in a CO2 gas sensing application,

such as to detect the ambient CO2 concentration. It

has a NDIR (Non-Dispersive Infrared) thermopile-

based gas sensing circuit and the concentration of

CO2 gas is measured based on the intensity of the

NDIR radiation.

It can be used as an application example to illustrate

how the thermopile, in combination with other

Renesas components, can be used to implement a

CO2 detection and concentration measurement

system.

Getting Started

Right out of the box, the EVK can begin measuring

CO2 levels right away:

1. Attach the LCD module to the main EVK board

2. Remove the two shorting jumpers from the MODE

and RESET headers on the main board. Save

these for use when flashing new versions of

firmware to the kit.

3. Connect the provided USB cable to the board and

to a power source, such as a phone charger or a

PC USB port.

Two splash screens will be displayed in sequence,

identifying the EVK, its software version and serial

number. Then after a 30 seconds warm-up period

(“CO2 WARM”), the CO2 concentration will be

displayed on the LCD, and updated every 5 seconds.

The LCD will also display Barometric Pressure (BP),

Relative Humidity (RH) and ambient temperature in

degrees C (dC).

Two pushbuttons are used for viewing additional

information and calibrating the board. Sw1 cycles

through displaying available modes and Sw2 selects

the currently displayed mode for further operations.

RTD120D-EVK

Thermopile CO2 Detector Evaluation Kit

R36UH0001EU0100 Rev.1.0 Page 2

Jul 28, 2021

RTD120D-EVK Quickstart Guide

The EVK can be also be used with a Graphical User Interface that runs on a connected PC.

The EVK comes pre-calibrated, but it can be re-calibrated by the user if desired. CO2 calibration can be performed

in either of two ways:

▪ In a stand-alone fashion, using the LCD and pushbutton user interface on the EVK itself, or

▪ With a graphical user interface (GUI), using a connected PC for a more interactive and visual experience.

See the RTD120D-EVK Thermopile CO2 Detector Evaluation Kit User Manual for further details.

Figure 1. EVK Components

R36UH0001EU0100 Rev.1.0 Page 3

Jul 28, 2021

RTD120D-EVK Quickstart Guide

Revision History

Revision Date Description

1.0 Jul 28, 2021 Initial release.

IMPORTANT NOTICE AND DISCLAIMER

RENESAS ELECTRONICS CORPORATION AND ITS SUBSIDIARIES (“RENESAS”) PROVIDES TECHNICAL

SPECIFICATIONS AND RELIABILITY DATA (INCLUDING DATASHEETS), DESIGN RESOURCES (INCLUDING

REFERENCE DESIGNS), APPLICATION OR OTHER DESIGN ADVICE, WEB TOOLS, SAFETY INFORMATION, AND

OTHER RESOURCES “AS IS” AND WITH ALL FAULTS, AND DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED,

INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A

PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY RIGHTS.

These resources are intended for developers skilled in the art designing with Renesas products. You are solely responsible

for (1) selecting the appropriate products for your application, (2) designing, validating, and testing your application, and (3)

ensuring your application meets applicable standards, and any other safety, security, or other requirements. These

resources are subject to change without notice. Renesas grants you permission to use these resources only for

development of an application that uses Renesas products. Other reproduction or use of these resources is strictly

prohibited. No license is granted to any other Renesas intellectual property or to any third party intellectual property.

Renesas disclaims responsibility for, and you will fully indemnify Renesas and its representatives against, any claims,

damages, costs, losses, or liabilities arising out of your use of these resources. Renesas' products are provided only subject

to Renesas' Terms and Conditions of Sale or other applicable terms agreed to in writing. No use o any Renesas resources

expands or otherwise alters any applicable warranties or warranty disclaimers for these products.

('LVFODLPHURev.1.0 Mar 2020)

Corporate Headquarters Contact Information

TOYOSU FORESIA, 3-2-24 Toyosu, For further information on a product, technology, the most

Koto-ku, Tokyo 135-0061, Japan up-to-date version of a document, or your nearest sales

www.renesas.com office, please visit:

www.renesas.com/contact/

Trademarks

Renesas and the Renesas logo are trademarks of Renesas

Electronics Corporation. All trademarks and registered

trademarks are the property of their respective owners.

Altri manuali per RTD120D-EVK

Questo manuale è adatto per i seguenti modelli

Altri manuali Renesas Hardware per computer

Renesas

Renesas H8S series Manuale utente

Renesas

Renesas IAR KickStart Kit R-IN32M4-CL3 Manuale utente

Renesas

Renesas DA16200 PMOD Manuale utente

Renesas

Renesas M3T-FLX-64NSA Manuale utente

Renesas

Renesas Wi-Fi Pmod Expansion Board Manuale utente

Renesas

Renesas Protection Board R0E330850ACBP0 Manuale utente

Renesas

Renesas HS0008EASF5HE Manuale utente

Renesas

Renesas M302N1 Manuale utente

Renesas

Renesas Pmod RYZ012A1 Manuale utente

Renesas

Renesas M30830T-EPBM Manuale utente

Renesas

Renesas H8S/2345 Series Manuale utente

Renesas

Renesas Converter Board M37530T-PTCB Manuale utente

Renesas

Renesas RYZ024A PMOD Manuale utente

Renesas

Renesas Asynchronous SH7145F Istruzioni per l'installazione e il funzionamento

Renesas

Renesas HSG2005 Manuale utente

Renesas

Renesas SH7781 Manuale utente

Renesas

Renesas uPD60620 Manuale utente

Renesas

Renesas DA14AVDDECTDEVKT Manuale utente

Renesas

Renesas H8S/2600 Series Manuale utente

Renesas

Renesas RZ/V2M Guida utente

Renesas

Renesas RA2 Series Manuale utente

Renesas

Renesas M16C/6V Manuale utente

Renesas

Renesas DA16200 PMOD Manuale utente

Renesas

Renesas Converter Board M3T-100LCC-QSD Manuale utente

Manuali Hardware per computer popolari di altre marche

EMC2

EMC2 VNX Series Manuale del proprietario

Panasonic

Panasonic DV0PM20105 Manuale utente

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuale utente

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuale utente

Raidon

Raidon iT2300 Manuale utente

National Instruments

National Instruments PXI-8186 Manuale utente

Hauppauge

Hauppauge WinTV-HVR-2250 Manuale utente

Kontron

Kontron CP6002 Manuale utente

Manhattan

Manhattan 702843 Manuale utente

Aphex

Aphex 230 Manuale utente

AMD

AMD Phenom II Manuale operativo

Intel

Intel NUC 12 Pro Manuale utente

dbx

dbx Zone Pro 1260 Manuale utente

Galaxy

Galaxy GHDX2-2430S-24F4D Manuale utente

Intel

Intel AXXRMFBU4 Manuale utente

Kontron

Kontron DIMM-PC/MD Manuale utente

ST X-NUCLEO-SAFEA1B Istruzioni operative

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuale utente