Renesas SKP16C26 StarterKit Plus Manuale utente

Analog

Adjust (R16)

Power

LED

Reset

Switch

User

Switches

Thermistor

8 Characters x 2 Lines LCD

LCD

Contrast

User LEDs

M16C/26 MCU

(M30262F8GP)

ICD LED Status:

Red – Target Stopped

Green – Target Running

Status – ICD Status

Red – ICD Power

RTA-FoUSB-MON

In-Circuit Debugger

(ICD)

Target/Bus

Power Mode

Selector

SKP16C26 StarterKit Plus QuickStart Guide Page 1 of 5

Figure 1. SKP16C26

QuickStart Guide SKP16C26

StarterKit Plus

1. SKP16C26 StarterKit Plus Software Install

a) Please insert the enclosed CD into your computer’s CD-ROM drive. The CD should auto-start, displaying the SKP Picker

Install Screen. Follow the directions in the installation windows to install the Renesas tools.

i) If the installation screen does not appear, please browse the CD root folder and double-click on “SKP-Installer.exe”.

– Do not plug the In-Circuit Debugger into your USB port until instructed to in Section 2, USB Driver Installation.

– The installation process requires a valid SKP serial number. Locate the label on the PC board or on the side

of your box.

– During the installation process, you may be prompted to restart your computer. Do not restart until the SKP installer

has completed installation of all of the software items.

– During the SKP install, dialog boxes will appear asking if you would like to install the development tools or not.

The development tools will allow you to evaluate the different features of the M16C/26 MCU and the software

development environment (debugger, compiler, linker, etc…).

2. USB Driver Installation

When you connect the RTA-FoUSB-MON In-Circuit Debugger (ICD) to your computer for the first time, Windows will recognize

this new device and will request the drivers. Follow the steps below to install the drivers. Administrator privileges are

required to install the driver on a Windows 2000/XP machine.

a) Plug one end of the USB cable into the RTA-FoUSB-MON and the other into a USB socket on your PC (the supplied USB

cable is keyed for the mini USB connector on the FoUSB-MON). The “Found New Hardware Wizard” window will appear.

b) If using Windows XP, skip to step 2 c); otherwise, click <Next>.

c) Verify the (Recommended) option is selected and click <Next>.

d) Select “Specify a location” and leave all other options un-checked; click <Next>.

e) Browse to the “C:\MTOOL\FOUSB\USB Drivers” folder.

f) Select the file “fousb.inf” and click <Open>.

g) Click <Ok> to install the USB Driver.

– For Windows XP, a dialog box is displayed warning that the driver has not been tested for Windows XP compatibility.

Please disregard this warning and continue driver installation.

– You can verify that the driver is installed properly by looking at how fast the Status (yellow) LED is blinking on the

RTA-FoUSB-MON. If the driver is loaded correctly, the Status LED will be blinking once every second. If not, the Status

LED will blink 2-3 times a second (if you continue having driver installation problems, see SKP16C26 User’s Manual,

Appendix A. Troubleshooting).

Figure 2. SKP16C26 System Connectivity

SKP16C26 StarterKit Plus QuickStart Guide Page 2 of 5

SKP16C26

10-pin

Target

Cable

PC with Windows®98SE,

2000, Me, or XP

ICD

Mini USB

Cable

Indice

Altri manuali Renesas Hardware per computer

Renesas

Renesas R0E53035ACFJ50 Manuale utente

Renesas

Renesas RA4T1 Manuale utente

Renesas

Renesas M16C/62P Group Manuale utente

Renesas

Renesas Converter Board M30291T-64FPD Manuale utente

Renesas

Renesas M30100 Manuale utente

Renesas

Renesas Single-Chip Microcomputer M37531T-ADS Manuale utente

Renesas

Renesas QB-RL78G1C Manuale utente

Renesas

Renesas PRQP0100JE-B Manuale utente

Renesas

Renesas SuperH Family E10A-USB Manuale utente

Renesas

Renesas H8S/2338 Series Manuale utente

Renesas

Renesas Emulation Pod M30100T3-RPD-E Manuale utente

Renesas

Renesas SH7706 Series Manuale utente

Renesas

Renesas SH7206 Manuale utente

Renesas

Renesas Direct Dummy IC M3T-DCT42B-450 Manuale utente

Renesas

Renesas IE-703107-MC-EM1 Manuale utente

Renesas

Renesas QB-RL78I1A Manuale utente

Renesas

Renesas H8/329 Series Manuale utente

Renesas

Renesas Renesas Synergy AE-CLOUD2 Manuale utente

Renesas

Renesas HD151TS207SS Manuale utente

Renesas

Renesas H8/38347 Manuale utente

Renesas

Renesas Converter Board R0E521237CFK00 Manuale utente

Renesas

Renesas H8SX/1648 Manuale utente

Renesas

Renesas R0E0100TNPFK00 Manuale utente

Renesas

Renesas E2 Emulator Manuale utente

Manuali Hardware per computer popolari di altre marche

EMC2

EMC2 VNX Series Manuale del proprietario

Panasonic

Panasonic DV0PM20105 Manuale utente

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuale utente

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuale utente

Raidon

Raidon iT2300 Manuale utente

National Instruments

National Instruments PXI-8186 Manuale utente

Hauppauge

Hauppauge WinTV-HVR-2250 Manuale utente

Kontron

Kontron CP6002 Manuale utente

Manhattan

Manhattan 702843 Manuale utente

Aphex

Aphex 230 Manuale utente

AMD

AMD Phenom II Manuale operativo

Intel

Intel NUC 12 Pro Manuale utente

dbx

dbx Zone Pro 1260 Manuale utente

Galaxy

Galaxy GHDX2-2430S-24F4D Manuale utente

Intel

Intel AXXRMFBU4 Manuale utente

Kontron

Kontron DIMM-PC/MD Manuale utente

ST X-NUCLEO-SAFEA1B Istruzioni operative

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuale utente