Reolink QG1_A Manuale utente
Reolink Solar Panel
Quick Start Guide
For more troubleshooting, please go to FAQs on our website:
https://reolink.com/faqs/
For other technical support, please contact us at
Technical Support
QG1_A
Welcome to Reolink
Easy Setup Within Minutes!
What’s in the Box
Solar Panel
x1
Bracket
x1
Screws
(in pack)
Please select a position with the most sunlight throughout the year for your solar panel. The Reolink
solar panel only needs a few hours of direct sunlight to sufficiently power your camera daily.The amount
of energy that the solar panel can produce is affected by weather conditions, seasonal changes,
geographic locations, etc.
The Ideal Angle = The Local Latitude + 5°
The Northern Hemisphere
Equator
The Southern Hemisphere
Sun
Mount the bracket with the
mounting template and the screws
provided in the package.
Loosen the adjusting control on the bracket and adjust
the angle of the solar panel to make it receive direct
sunlight, and then retighten the adjusting control to
secure your setting.
1. 2.
Slot the solar panel into the bracket and make
sure it's secure.
3.
4.
Connect the solar panel to the Reolink Argus
2 camera with the micro USB cable.
Make sure the camera is
plugged in all the way and that
the waterproof wire cover
protects the interface between
the camera and the solar panel.
1. Make sure that there is NO blocking on the solar
panel. The energy harvesting efficiency drops
drastically even when a small portion of the solar
panel is blocked.
2. Please don’t install the solar panel completely
horizontally. Otherwise your solar panel might
accumulate dust and other debris easily. It’s
advised to install the solar panel angularly to make
it receive direct sunlight.
3.Wipe the solar panel regularly to remove the dust or
debris.
Important Notes:
5.
The Waterproof
Wire Cover
!
Altri manuali per QG1_A
1
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Reolink Pannello solare
