Retevis RT-35 Manuale utente

User's manual

Rt35

Kids walkie talkies

Mode RT 35

Precautions

This unit conforms to telecommunications management

standards, please observe the following rules when using.

1. When Using this machine, you should not cause harmful

interference and must accept any received signal.

2. Any operation without permission is illegal, and maybe violet

the telecommunications management standards.Such as: change

the frequency, change the transmit power, extend the antenna,

and so on.

3.This machine cannot be used in a hazardous environment,

because it may cause an explosion or fire.The hazardous

environment include: gas stations, hospitals, airports, the place

without electrical shielding and so on.

4.Do not use soft cloth with detergent or solvent to wipe or clean

the machine, use the dry, acid-free soft cloth only.

5.In order to ensure the best voice quality, please keep 5cm

distance between your mouth and the machine and use your

normal voice intensity. To get a better voice quality, please turn

the antenna upward.

6.The battery of this machine has an internal protect function.

www.retevis.com

Battery Usage

The mini walkie-talkie built-in lithium ion battery. The fittings

include USB charger that can charge the lithium battery, the

charging method is as follows:

1.The charging jack is at the right side of the machine.

2.Connect the USB charger to a standard power socket.

3.Then connect the USB charger to the charging jack or

headphone jack. During charging, the battery indicator will be

cycle moving. And when charging complete, the cycle moving

will be stopped.

Preface

Welcome to use this mini walkie-talkie, please read this user

manual carefully in order to understand all the operating function.

Walkie talkie 2

Battery 2

Clip 2

Double connector USB line 1

User’s Manual 1

www.retevis.com 2

Menu mode LCD instructions

www.retevis.com

indicator name content

218

Channel

programming/

clock / volume

level

Channel programming / clock / volume level.

When the volume level is displayed in the

number of standby Press up or down key

188

CTCSS / DCS

programming

/volume

When the minutes standby, press PPT key

to display after the current CTCSS / DCS

programming number.

Standby display the volume indication

press up key or down key.

Battery power

display

Show the number of cells, the more power

the more foot: High power

low battery

Hands - free

instructions

Display when the unit is in the VOX mode of

operation.

Alarm indication

Display when the unit is in the alarm mode

of operation.

Open the intercom

function indication

Display when the unit is in the open mode.

When close will not show this icon.

Scanning

instructions

Display when the walkie-talkie under scan

function.

ITEM DESCRIPTION

Notice:

This radio come with a dedicated charger, To avoid damage your

radio and lithium ion batteries, please do not use other chargers.

Please do not transmit when charging.

The new battery should be charger around 12hours when use it

first time..

www.retevis.com 4

Number

Name

Description

Power/Menu

Button

Long press this button can open / close radio; short

press to enter the radio function setting.

PTT key

Press and hold this button to transmit information

quickly press twice to send calling sound.

Up key

Use this button to adjust volume or function setting

choosing.

Down key

Use this button to adjust volume or function setting

choosing.

Scan/

Lampe

Long press to enter the scanning channel, short

press to enter the illumination.

Monitor/

Lock button

Long press to enter the inter-lock, short press enter

monitor function.

MIC

Built-in microphone.

Speaker

Built-in speaker.

Antenna

Enhanced signal reception and emission.

USB

Interface

It is a walkie-talkie charging interface.

Earpiece

Jack

It is a walkie-talkie headset jack.

Flashlight

It is a walkie-talkie lights.

LED

It is a walkie-talkie LED.

The main features of walkie-talkie

1.A plurality of selectable channels.

2.Automatic squelch.

3.Auto save power.

4.It has an internal voice intercom (speakerphone) function.

5.Having a channel scan function.

6.24-hour time display.

7.Alarm reminders appear.

8.Backlit display.

9.Use BL-5B lithium batteries

www.retevis.com

Battery low power tips

When the unit is low battery in the talk mode and standby mode,

power indication start Flashes. Remind you to recharge.

Using the walkie-talkies

1.Press and hold the Power / Menu button about 3 seconds, the

unit will power on to speak mode, The display shows the

icon under intercom mode.

2.Press the Power / Menu button to access the function settings.

Activated icon will begin blinking.

Press repeatedly this button, explore other menu functions until

back to the intercom mode. Every time you press the Power /

Menu button, the function or icon will show on the screen.

3.After activate a function icon, press the up or down key to

select menu options.

4.Press PTT-button to save and back to standby.

Select channel

1.When the radio is Standby, press the Power / Menu button again

until the current channel starts flashing on the LCD screen, you

can change the Channel.

2.Press the up or down key to select the channel number.

3.Press the Power / Menu button to save the settings and return

to the receiving status.

4.Press the PTT-button to save and return to the receiving status.

www.retevis.com 6

Note: CTCSS / DCS cannot make your talking content keep

secret, it can only make you unable to receive calls from other

CTCSS / DCS users.

1.When standby, press the Power / Menu button twice, until the

mute code of current channel starts flashing, thus you can reset

status of CTCSS/DCS.

Press the up key or down key to select the privacy code.

Long press the up key or down key to select the privacy code

quickly.

2. Press the PTT / CALL to save the settings. Or press the

power / menu button to enter next function option.

CTCSS/DCS

Select CTCSS/DCS which allows you to receive calls from

members of the same group (same mute code) issued, avoiding

the same frequency interference from other users.

Channel scan

Scan fucntion lets you scan all channels occupancy.

1.When standby, press the Scan button to activate scan function,

the machine satarts to scan all channel activities), when there are

voices in scanned channel, it will stay 4~5s in this channel, then

continue to scan next channel.)

2Press theScan to exit the channel scan.button

Transmission and reception

1.On receiving status once power on.

www.retevis.com

Adjust the volume

This machine has eight adjustable volume. Press the up or down

key to adjust the volume when the walkie talkie is under standby.

Call Tone

This machine has 10 call alerts sound available.

Call Tone Setting

1. When Standby, repeatedly press the Power / Menu key to call

setting on the LCD screen.

2.Press the up or down key to select a call tone.

3.Press the Power / Menu button to save the settings and then

enter other function setting, or press PTT key to save and return

to standby.

Send call alerts sound

1.When you need to send call alerts, press the PTT key twice

quickly, Call alarm will be send automatically.

2.When call alerts sound transmit complete, you can hear a

short confirmation sound, the unit will be back to radio standby

status.

3.After speaking, release the speaking PTT key,

the machine is in the receiving status.

2.Press the PTT key,and use the normal voice to speak,

there should be 5 cm between mouth and microphone.

www.retevis.com 8

Hands-free function

The machine is equipped with hands-free function, no need to

press PTT key , it can automatically send voice.

1.When Standby, repeatedly press the Power / Menu button until

the LCD hands-free function label appears.

2.Press the up or down key to switch hands-free on / off function,

alternately shows "0,1,2,3"，Appears on the display Hands-free

indicator .

(0: close hands-free function; 1: noisy environments; 2: Under

normal circumstances use: 3: quiet environments)

High/Low Power Selection

Standby, repeatedly press the Power / Menu button until the

display the flashing LO or HI (LO for small power 0.5W; HI for

high-power 1W) .Then, click PTT to save.

Use earplugs (optional)

1.The walkie-talkie is set to non-hands-free mode.

2.Open the headset/charger jack on the side of the machine.

Insert the headset.adjust the microphone position.

Automatic power saving feature

The machine is equipped with a unique circuit that can extend

battery life，If you do not receive any signal transmission within

5 seconds, it will automatically switch to energy-saving mode, in

this mode, you can still receive the signal)

www.retevis.com

Altri manuali per RT-35

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Retevis Radio bidirezionale

Manuali Radio bidirezionale popolari di altre marche

Midland

Midland 70-1526A/B Manuale utente

HYT

HYT TC700 Manuale utente

DNT

DNT Space100 Manuale utente

Legacy

Legacy ProLine Series Manuale utente

Evolveo

Evolveo FreeTalk XM2-2 Manuale utente

AWC

AWC AWR1688+ Manuale utente

Motorola

Motorola XT665d Manuale utente

Cobra

Cobra 2-Way Radio Manuale utente

Klutch

Klutch KR-400 Manuale utente

Garmin

Garmin Rino 655t Manuale utente

Motorola

Motorola TLK 150 Manuale utente

Midland

Midland MXT275J Manuale utente

Titan

Titan TR200 Manuale utente

Cobra

Cobra CXT645 Manuale utente

Tait

Tait TM9100 Manuale utente

Yaesu

Yaesu FT-65R Manuale utente

RELM

RELM RP3000 Manuale utente

Motorola

Motorola ASTRO SRX 2200 Series Manuale utente