Retevis RT10 Manuale utente

DMR Digital Two Way Radio

USER’S MANUAL

RT10

Charging The Battery

Getting Started

Content

PTT Key

Setting

Troubleshooting

Unpacking and Checking Equipment

Battery Information

Install and Remove Accessories

Basic Operations

Function Specification

LED indicator

Receive and Transmit Call

Encryption Function

Specification12

Address：Uetzenacker 29,38176 wendeburg

EU Importer：Germany Retevis Technology GmbH

Supplied Accessories

Unpacking and Checking Equipment

Commodity

Welcome to use our transceiver, before use, we suggest you:

● Check the packing box whether it has been damaged.

● Please unpack the box carefully, and check if it includes all items

that supplied below.If any item is found missing or damaged during

shipment,please notify your dealer.

Quantity

Transceiver

Antenna

Battery

Battery Charger

Belt Clip

Hand Strap

User Manual

Charging The Battery

Battery Information

Please do not continue charging when the battery

is full-charged situation, otherwise will shorten the

lift of battery and reduce its feature.

Please use our company's official charger, and follow the steps

below to charge the battery.

1. Connect the charger to the power supply socket.

2. Install the battery or the transceiver with battery, then the light

turns red, indicating that the battery is being charged.

3. If the red light is off while the green light is on,this indicates-

that the battery is fully charged.

4. Unplug the charger from the power supply socket, and

remove the battery.

The battery is not fully charged in the factory, please charge it

before use.

charge the battery for the first time after purchase or extended

storage(more than 2month)may not bring the battery to its

normal operating capacity. After repeating fully charge/distance

cycle for two or three times，the operating capacity will reach

the best performance.

Notice

1. The ambient temperature should be between 5℃and 40℃

while charging. If beyond this temperature, battery can not be

fully charged. So please prepare spare battery as backup during

cold weather. Do not throw away those batteries which can not

be usedat this time，they may be used in normal temperature.

2. When the battery contacts is dirty or stains, this will affect

thenormal use of the battery charging，Please wipe clean and

then start charge.

3. Before charging, turn off the radio, or it will affect the normal

charging.

4. When the battery or radio is wet, do not charge the batterer.

Please dry it before use.

5. After the battery has been properly charged, if the battery

capacity still can not return to normal capacity, that means

battery life is end, please replace it.

Battery Type

Please charge the battery with our company official battery. Use

other battery types may cause explosion and injure people.

Safety Precautions

1. Do not throw batteries into fire.

2. Do not attempt to disassemble the battery pack housing.

Battery storage

1. Battery has the phenomenon of self-discharge, therefore,if the

battery is not in use for a long time, please be fully charged first

before storage, this is to void battery damage due to excessive

self-discharge.

2. After a period of storage, battery needs to be charger, In order

to avoid excessive battery from the battery capacity is reduced.

Battery storage is recommended after 6 months battery charge.

3. Please note that the temperature and humidity of store

battery. Keep the battery in a cool, dry conditions room to avoid

battery self-discharge

Install and Remove Accessories

Install/Remove Battery Pack

Note:

· Do not short circuit battery pack terminals or throw battery

pack into fire.

· Do not try to remove the battery pack shell.

· Do not install battery pack under dangerous conditions,

otherwise spark will cause explosion.

Insert the top part of the battery pack into the top 2 slots of the

transceiver and then button the bottom's buckle . (1)

To remove the battery pack, make sure the transceiver has

been turned off, and then open the bottom's buckle,Remove the

battery when the batter pops up. (2)

Install Antenna

Hold the base of antenna, rotate it tightly into the connector of the

top of transceiver clockwise. (3)

Install/Remove Belt Clip

If necessary, install the supplied screws into the belt clip at the back

of battery pack for easy carry.

To remove the belt clip, directly remove the two screws only. (4)

Install Hand Strap

Install the hand strap at the middle circle of the transceiver. (5)

(3) (4) (5)

(1) (2)

Getting Started

Remark: Different functions of Side Key 1, Side Key 2,which

are used by the long press or a short press, can be defined by

programming software.

The following functions can be defined:

Side Key:

Permanent Monitor/Zone Selection /Repeater/Talkaround

/Battery Query Function /Scan/VOX/Local Alarm

Factory Default Setting :

Side Key 1: Long press activates Local Alarm, short press

activates VOX

Side Key 2 : Long press activates Zone Selection, short press

activates Permanent Monitor

Side Key 1 SP/MIC/

Program Jack

(SP/MIC)

Battery Pack for

Charging the Radio

PTT

Side Key 2

Basic Operations

POWER ON and POWER OFF:

Rotate the knob clockwise until a

“click” is heard, transceiver will

have a short beep sound, indicating

power on detecting success.

Attention:

If your transceiver is not power on,

please check the battery, and confirm

if the battery has been charged and

installed correctly. If it still can not be turned on, please contact

with the agent.

To turn off the transceiver, please rotate the power knob /

Volume knob anticlockwise until a “click” is heard, then

transceiver is power off.

Adjust Volume

When the transceiver is power on,

rotate the power switch / Volume

knob to adjust the volume. Clockwise

rotation to increase the volume;

Anticlockwise rotation to decrease the

volume. You can press the side key

which is programmed MONITOR

function to monitor the current volume.

Attention:

MONITOR key can be set to P1 or P2 Key according to the

programming software.

Channel Selection:

Rotation the channel knob to select

the desired channel. This transceiver

has 128 channels.

Attention:

There are eight zones in this transceiver,

each zone has 16 channels, Zone can be

selected by pre-programmed key.

Transmit

When going to transmit, press PTT

key, keep microphone away from

your mouth about 3-4cm, and speak

in your usual tone.

Receiving

Release the PTT key to receive.

Adjust the suitable volume to get the

best receiving result.

Function Specification

LED indicator

LED indicator shows transceiver's working status.Red light

indicates the transceiver is transmitting.

Green light indicates the transceiver is on process of power on

or is receiving non-encrypted signal or data, or is detecting air

activity.

Call (PTT) key

Each channel in this transceiver can be set into a digital channel.

When in transmitting, press PTT key continuous will transmit

signals to other transceivers continuously.

Press PTT to transmit and release PTT to receive. The micro-

phone will be activated by pressing PTT

Receive and Transmit Call

Zone Selection

The zone is a group of channels.The transceiver supports at

most eight zones, and each zone is not more than 16 channels

1. Press the key pre-programmed.

2.You will hear a notification sound , then radio will exchange

from Zone 1 to Zone 8.

Indice

Altri manuali Retevis Radio bidirezionale

Manuali Radio bidirezionale popolari di altre marche

Midland

Midland 70-1526A/B Manuale utente

HYT

HYT TC700 Manuale utente

DNT

DNT Space100 Manuale utente

Legacy

Legacy ProLine Series Manuale utente

Evolveo

Evolveo FreeTalk XM2-2 Manuale utente

AWC

AWC AWR1688+ Manuale utente

Motorola

Motorola XT665d Manuale utente

Cobra

Cobra 2-Way Radio Manuale utente

Klutch

Klutch KR-400 Manuale utente

Garmin

Garmin Rino 655t Manuale utente

Motorola

Motorola TLK 150 Manuale utente

Midland

Midland MXT275J Manuale utente

Titan

Titan TR200 Manuale utente

Cobra

Cobra CXT645 Manuale utente

Tait

Tait TM9100 Manuale utente

Yaesu

Yaesu FT-65R Manuale utente

RELM

RELM RP3000 Manuale utente

Motorola

Motorola ASTRO SRX 2200 Series Manuale utente