Revopoint 3D Technologies POP Manuale utente
Contact us with
support@revopoint�d.com
start to build a new project;
open a scanned project;
start or stop scanning;
complete a scanning operation;
cancel the latest several scanned frames of a model and revert to the previous state;
delete the scanned model;
line the scanned �D point cloud image into a plane or triangular mesh. The “No Color” model only
consists of point cloud and mesh information, and the “Color” model also contains the color information of each
point.
match pixels of the picture on the mesh model to improve resolution of the texture and the color.
export the �D model
Altri manuali per POP
2
Indice
Altri manuali Revopoint 3D Technologies Scanner
Revopoint 3D Technologies
Revopoint 3D Technologies Fingo S1 Manuale utente
Revopoint 3D Technologies
Revopoint 3D Technologies POP 2 Manuale utente
Revopoint 3D Technologies
Revopoint 3D Technologies MINI Manuale utente
Revopoint 3D Technologies
Revopoint 3D Technologies REVO POP Series Manuale utente
Revopoint 3D Technologies
Revopoint 3D Technologies POP 2 Manuale utente
Revopoint 3D Technologies
Revopoint 3D Technologies POP 3D SCANNER Manuale utente
Revopoint 3D Technologies
Revopoint 3D Technologies MINI Manuale utente
Revopoint 3D Technologies
Revopoint 3D Technologies POP 2 Manuale utente
Revopoint 3D Technologies
Revopoint 3D Technologies POP Manuale utente
Revopoint 3D Technologies
Revopoint 3D Technologies POP Manuale utente
