Rexel Auto+ 80X Manuale di istruzioni

start here

démarrez ici

starten sie hier

iniziare qui

begin hier

empieza aquí

comece aqui

buradan başlayın

ξεκινήστε εδώ

start her

aloita tästä

start her

börja här

rozpocznij tutaj

začněte zde

kezdés itt

начинать здесь

SHREDDERS

AUTO+80X

™

2min

MAX

GB instruction manual 6

F manuel d’utilisation 12

D bedienungsanleitung 18

I manuale d’istruzioni 24

NL gebruiksaanwijzing 30

E manual de instrucciones 36

P manual de instruções 42

TR kullanım kılavuzu 48

GR οδηγίες 54

DK brugsvejledning 60

FI käyttöopas 66

NO bruksanvisning 72

S bruksanvisning 78

PL instrukcja obsługi 84

CZ návod k obsluze 90

H használati útmutató 96

RUS руководствo по зкcплyатации 102

SHREDDERS

AUTO+80X

™

6register this product online at www.accobrands.com

To guard against injury, the following basic safety precautions must be observed in the set-up of this

product.

• Ensure the machine is plugged into an easily accessible power outlet, and ensure the cable is not

likely to trip up a passer by.

• Any attempt to repair this unit by unqualied personnel will invalidate the warranty. Please return to

supplier.

• Unplug your shredder before moving it or when it is not in use for an extended period of time.

• Do NOT operate with a damaged power supply cord or plug, after it malfunctions, or after it has

been damaged in any manner.

• Do NOT overload electrical outlets beyond capacity as this can result in re or electrical shock.

• The socket-outlet should be installed near the equipment and shall be easily accessible.

• Do NOT alter the attachment plug. The plug is congured for the appropriate electrical supply.

• Do NOT use near water.

• Do NOT use aerosol dusters or cleaners.

• Do NOT spray anything into the shredder.

• Do NOT load the auto-feed chamber with unopened junk mail, magazines, bound documents etc.

Although this shredder has been designed to comply with UL 60950-1 EN 60950-1 safety standards

including the “probe accessibility tests”, do not operate the shredder near children or pets.

autofeed technology

The Auto+ 80X has been designed to automatically shred up to 80 sheets from the auto-feed

chamber and up to 6 sheets through the manual feed slot. The auto-feed mechanism has been

designed to handle paper fastened with staples and paper clips and to only pull a few sheets of

paper into the cutting mechanism to minimise the risk of paper jams.

AUTO+ 80X™SHREDDERS 7

control panel and indicators

Continuous Jam BoostReverse Auto

warning symbols

This means no aerosols.

This means keep children away

from shredder.

This means you should be careful

because long hair can become

entangled in the cutting head.

This means don’t reach into the

feed opening of the cutting head.

This means be careful of loose

jewellery which could become

entangeld in the cutting head.

This means no oil lubrication,

use Rexel oil sheets only.

This means be careful of ties and

other loose clothing which could

become entangled in the cutting

head.

This means the shredder can

accept small paperclips.

This means the shredder can

accept small staples.

Safety First

Sheet capacity of manual feed

entry slot.

Paper Loading Door/Bin Door

Open or Bin Full indicator –

This means either:

• Loading door is open

• Bin is open

• Bin is full

Paper jam indicator – This means

there is a paper jam in the auto feed

chamber.

If this symbol is ashing the

shredder is attempting to clear a

paper jam automatically.

If this symbol is permanently

illuminated red please follow the

instructions under ‘Rare Occasion

of Jamming’.

Cool Down indicator – This means

the machine is cooling down.

8register this product online at www.accobrands.com

Auto+ 80X shredding capability

Auto+ 80X CAN shred the following:

• 80 sheets

• Stapled paper, 25mm within the corner

• 26/6 and 24/6 or smaller staples

• Small sized paper loaded centrally

• 80 sheets

• Paper clip paper, 25mm within the corner

• Capable of shredding small/medium paper clips (max. wire thickness = 0.9 mm)

• >80/100gsm paper (through manual feed slot ONLY)

• A3 folded in half max. 2 sheets

• 80 sheets

• 80 gsm paper

- A4 - 210mm x 297mm

- A5 - 148mm x 210mm

- A3 single sheet folded in half to make A4

Auto+ 80X CAN shred (through the manual feed slot):

Thick paper or

card.

Multiple folded

sheets (e.g. A3

sheets folded in

half).

Unopened mail

(e.g. junk mail).

Glossy paper or

a sheet covered

with print on both

sides.

Auto+ 80X CANNOT shred the following:

Large clips.

Check the length

of the paperclip

is not longer than

32mm.

Heavy duty

staples. Check

the staple leg

length is not

greater than

6mm.

Bound

documents

Bulldog clips

Magazines or

other documents

bound by multiple

staples or clips.

Adhesive labels.

Plastic sheets,

laminated

documents,

plastic folders.

AUTO+ 80X™SHREDDERS 9

1. operation

1 Unpack the product.

2 Connect the shredder to mains supply.

3 Ensure the on/o switch on the back of the shredder is in the ‘ON’ position.

4 To commence shredding, move the slide switch to the Auto position ( ) which sets the

shredder into auto mode. You are now ready to shred.

5 To load the shredder, simply lift the loading door catch to open the loading door and insert

documents. You can open the door further to 90 degrees for easier access if required. Load

up to 80 sheets at a time into the feed chamber. Do NOT ll above the MAX level, this could

damage the shredder.

6 The shredder will start shredding automatically ONLY after closing the loading door.

7 If there is still paper in the Autofeed tray after rst attempt, open and re-close paper loading

door a second time.

8 If you only have up to 6 sheets to shred, you can use the manual feed slot, provided the auto

feed chamber is empty.

9 Insert paper to be shredded into the feed area. The shredder will detect the paper and start

automatically.

10 If the shredder is left in auto mode for more than 2 minutes without being used, the shredder

will automatically turn back to sleep mode in order to save power.

11 The shredder will automatically ‘wake up’ from sleep mode when paper is inserted into the

shred mouth or you open the loading door.

2. reverse function

1 Should you wish to reverse paper out whilst shredding, a reverse button ( ) has been tted for

your convenience.

2 Reverse the paper out then turn the shredder o using the ON/OFF switch at the rear of the

shredder. Remove the paper from the manual feed slot (if being used) or open the loading door,

remove the remaining stack of paper, then pull the jammed paper free of the cutting mechanism.

3 To resume shredding return the slide switch to the auto position ( ) and turn on the machine by

using the ON/OFF switch at the rear of the shredder.

Rexel encourages customers to recycle shredded paper.

Please note that shredded paper cannot be recycled if mixed with credit card shards.

If recycling, please separate shredded paper and credit cards.

3. credit card shredding

The Auto+ 80X can shred credit cards. Switch the shredder to auto mode and insert the credit card

between the markings in the manual feed slot. Only shred one credit card at a time.

10 register this product online at www.accobrands.com

lubrication of the shredder

Only use Rexel Oil Sheets (2101948 & 2101949) to lubricate. ACCO Brands accepts no liability for

product performance or safety when other types or brands of lubricants are used on any part(s) of

this machine. Rexel recommend using an oil sheet after the bin has been emptied three times (and

for ongoing three bin cycle thereafter). Insert the oil sheet into the manual feed slot and NOT in the

auto-feed chamber. Using an oil sheet in the auto-feed chamber will contaminate the feed rollers

preventing the auto-feed mechanism shredding. Follow the maintenance instructions if the rollers

become contaminated.

5. maintenance

The rollers on the auto-feed mechanism may become dirty over time, please wipe clean with a dry

cloth to maintain maximum product performance.

service

We recommend these machines are serviced every 6 to 12 months by a Rexel service engineer –

see back of this booklet for the contact details of your local service centre and for enquiries about

maintenance contracts.

over heating

If the Auto+ 80X is used continuously for over 10 minutes the shredder may overheat and the cool

down indicator will ash red ( ). Please allow the shredder to cool down. When the shredder is

ready to be used the thermometer symbol will no longer illuminate. If the shredder needs to cool

down while shredding, no action is needed. The shredder will automatically restart shredding paper

once it has cooled down after periods of continuous use. All you need to do is ensure paper is

loaded into the chamber and the bin is empty when the machine is cooling down.

rare occasions of jamming

In the unlikely event of the shredder jamming, the Auto+ 80X will stop shredding. Check that the bin

is not full then try clearing the jam using the reverse ( ) and continuous jam boost ( ) switch

then return to Auto mode ( ). If this is unsuccessful follow the reverse function instructions.

4. bin full

The shredder will not function when the bin is full and the bin full symbol ( ) is illuminated.

You should empty the bin.

• Pull open the bin slowly to empty.

• Push the empty bin back into place and the machine will resume shredding.

bin or loading door open safety function

As a safety precaution, if the bin or loading door is opened during shredding, the shredder will stop

and the Bin Full indicator will illuminate ( ).

Indice

Altri manuali Rexel Distruggidocumenti

Rexel

Rexel Optimum AutoFeed+ 50X Manuale utente

Rexel

Rexel Mercury REM723 Manuale utente

Rexel

Rexel Promax QS RPX612 Manuale utente

Rexel

Rexel ProStyle+ Manuale utente

Rexel

Rexel Optimum AutoFeed+ 45X Manuale utente

Rexel

Rexel Momentum M510 Manuale utente

Rexel

Rexel RLS28 Manuale utente

Rexel

Rexel 2020300X Manuale utente

Rexel

Rexel AUTO + 600 X Manuale utente

Rexel

Rexel Momentum S206 Manuale utente

Rexel

Rexel ProStyle Manuale utente

Rexel

Rexel Momentum M515 Manuale utente

Rexel

Rexel AUTO +80X Manuale di istruzioni

Rexel

Rexel Rexel P180 Manuale utente

Rexel

Rexel Momentum X415 Manuale utente

Rexel

Rexel Momentum X406 Manuale utente

Rexel

Rexel Optimum AutoFeed+ 45X Manuale utente

Rexel

Rexel 2101942UK Manuale utente

Rexel

Rexel Auto+ 60X Manuale utente

Rexel

Rexel Optimum AutoFeed+ 45X Manuale utente

Rexel

Rexel Mercury RDS 2050 Manuale utente

Rexel

Rexel Promax QS RSS1838 Manuale utente

Rexel

Rexel PROSTYLE STYLE+ Manuale utente

Rexel

Rexel Easyfeed CC175 Manuale utente

Manuali Distruggidocumenti popolari di altre marche

Swingline

Swingline STACK-AND-SHRED200X&200XL 60X Manuale di istruzioni

GBC

GBC ShredMaster CC055 Manuale utente

UNITED OFFICE

UNITED OFFICE UAV 190 A1 Manuale utente

UNITED OFFICE

UNITED OFFICE UAV 190 A1 Manuale utente

Martin Yale

Martin Yale 227284S1 Manuale utente

Bonsaii

Bonsaii DocShred C223-A Manuale utente

HSM

HSM Pure 740 max Manuale utente

TRU RED

TRU RED TR-BMC20A Manuale utente

Fellowes

Fellowes 50S Manuale utente

GBC

GBC SHREDMASTER 1236SE Manuale utente

Gude

Gude GH 2600 P Manuale utente

Ativa

Ativa DQ80M Manuale utente

Q-Connect

Q-Connect Q8CC Manuale utente

Fellowes

Fellowes POWERSHRED C-325CI Manuale utente

Olivetti

Olivetti Privacy 5000C Guida rapida

UNITED OFFICE

UNITED OFFICE UAV 190 A1 Manuale utente

Dahle

Dahle paperSAFE 22022 Manuale utente

Formax

Formax OnSite FD 87 Manuale utente