Rexel Auto+ 60X Manuale di istruzioni
start here
démarrez ici
starten sie hier
iniziare qui
begin hier
empieza aquí
comece aqui
buradan başlayın
ξεκινήστε εδώ
start her
aloita tästä
start her
börja här
rozpocznij tutaj
začněte zde
kezdés itt
начинать здесь
SHREDDERS
AUTO+60X™
2min
MAX
1
4
3
5
2
GB instruction manual 6
F manuel d’utilisation 12
D bedienungsanleitung 18
I manuale d’istruzioni 24
NL gebruiksaanwijzing 30
E manual de instrucciones 36
P manual de instruções 42
TR kullanım kılavuzu 48
GR οδηγίες 54
DK brugsvejledning 60
FI käyttöopas 66
NO bruksanvisning 72
S bruksanvisning 78
PL instrukcja obsługi 84
CZ návod k obsluze 90
H használati útmutató 96
RUS руководствo по зкcплyатации 102
SHREDDERS
AUTO+60X
™
GB
6register this product online at www.accobrands.com
To guard against injury, the following basic safety precautions must be observed in the set-up of this
product.
• Ensure the machine is plugged into an easily accessible power outlet, and ensure the cable is not
likely to trip up a passer by.
• Any attempt to repair this unit by unqualied personnel will invalidate the warranty. Please return to
supplier.
• Unplug your shredder before moving it or when it is not in use for an extended period of time.
• Do NOT operate with a damaged power supply cord or plug, after it malfunctions, or after it has
been damaged in any manner.
• Do NOT overload electrical outlets beyond capacity as this can result in re or electrical shock.
• The socket-outlet should be installed near the equipment and shall be easily accessible.
• Do NOT alter the attachment plug. The plug is congured for the appropriate electrical supply.
• Do NOT use near water.
• Do NOT use aerosol dusters or cleaners.
• Do NOT spray anything into the shredder.
• Do NOT load the auto-feed chamber with unopened junk mail, magazines, bound documents etc.
Although this shredder has been designed to comply with UL 60950-1 EN 60950-1 safety standards
including the “probe accessibility tests”, do not operate the shredder near children or pets.
autofeed technology
The Auto+ 60X has been designed to automatically shred up to 60 sheets from the auto-feed
chamber and up to 5 sheets through the manual feed slot. The auto-feed mechanism has been
designed to handle paper fastened with staples and paper clips and to only pull a few sheets of
paper into the cutting mechanism to minimise the risk of paper jams.
GB
AUTO+ 60X™SHREDDERS 7
control panel and indicators
Continuous Jam BoostReverse Auto
warning symbols
This means no aerosols.
This means keep children away
from shredder.
This means you should be careful
because long hair can become
entangled in the cutting head.
This means don’t reach into the
feed opening of the cutting head.
This means be careful of loose
jewellery which could become
entangeld in the cutting head.
This means no oil lubrication,
use Rexel oil sheets only.
This means be careful of ties and
other loose clothing which could
become entangled in the cutting
head.
This means the shredder can
accept small paperclips.
This means the shredder can
accept small staples.
Safety First
Sheet capacity of manual feed
entry slot.
5
Cool Down indicator – This means
the machine is cooling down.
GB
8register this product online at www.accobrands.com
Auto+ 60X shredding capability
Auto+ 60X CAN shred the following:
• 60 sheets
• Stapled paper, 25mm within the corner
• 26/6 and 24/6 or smaller staples
• Small sized paper loaded centrally
• 60 sheets
• Paper clip paper, 25mm within the corner
• Capable of shredding small/medium paper clips (max. wire thickness = 0.9 mm)
• >100gsm paper (through manual feed slot ONLY)
• A3 folded in half max. 2 sheets
• 60 sheets
• 80 gsm paper
- A4 - 210mm x 297mm
- A5 - 148mm x 210mm
- A3 single sheet folded in half to make A4
Auto+ 60X CAN shred (through the manual feed slot):
Thick paper or
card.
Multiple folded
sheets (e.g. A3
sheets folded in
half).
Unopened mail
(e.g. junk mail).
Glossy paper or
a sheet covered
with print on both
sides.
Auto+ 60X CANNOT shred the following:
Large clips.
Check the length
of the paperclip
is not longer than
32mm.
Heavy duty
staples. Check
the staple leg
length is not
greater than
6mm.
Bound
documents
Bulldog clips
Magazines or
other documents
bound by multiple
staples or clips.
Adhesive labels.
Plastic sheets,
laminated
documents,
plastic folders.
GB
AUTO+ 60X™SHREDDERS 9
1. operation
1 Unpack the product.
2 Connect the shredder to mains supply.
3 Ensure the on/o switch on the back of the shredder is in the ‘ON’ position.
4 To commence shredding, move the slide switch to the Auto position ( ) which sets the
shredder into auto mode. You are now ready to shred.
5 To load the shredder, simply lift the loading door catch to open the loading door and insert
documents. You can open the door further to 90 degrees for easier access if required. Load
up to 60 sheets at a time into the feed chamber. Do NOT ll above the MAX level, this could
damage the shredder.
6 The shredder will start shredding automatically ONLY after closing the loading door.
7 If there is still paper in the Autofeed tray after rst attempt, open and re-close paper loading door
a second time.
8 If you only have up to 5 sheets to shred, you can use the manual feed slot, provided the auto
feed chamber is empty.
2. reverse function
1 Should you wish to reverse paper out whilst shredding, a reverse button ( ) has been tted for
your convenience.
2 Reverse the paper out then turn the shredder o using the ON/OFF switch at the rear of the
shredder. Remove the paper from the manual feed slot (if being used) or open the loading door,
remove the remaining stack of paper, then pull the jammed paper free of the cutting mechanism.
3 To resume shredding return the slide switch to the auto position ( ) and turn on the machine by
using the ON/OFF switch at the rear of the shredder.
Rexel encourages customers to recycle shredded paper.
Please note that shredded paper cannot be recycled if mixed with credit card shards.
If recycling, please separate shredded paper and credit cards.
3. credit card shredding
The Auto+ 60X can shred credit cards. Switch the shredder to auto mode and insert the credit card
between the markings in the manual feed slot. Only shred one credit card at a time.
GB
10 register this product online at www.accobrands.com
lubrication of the shredder
Only use Rexel Oil Sheets (2101948 & 2101949) to lubricate. ACCO Brands accepts no liability for
product performance or safety when other types or brands of lubricants are used on any part(s) of
this machine. Rexel recommend using an oil sheet after the bin has been emptied three times (and
for ongoing three bin cycle thereafter). Insert the oil sheet into the manual feed slot and NOT in the
auto-feed chamber. Using an oil sheet in the auto-feed chamber will contaminate the feed rollers
preventing the auto-feed mechanism shredding. Follow the maintenance instructions if the rollers
become contaminated.
5. maintenance
The rollers on the auto-feed mechanism may become dirty over time, please wipe clean with a dry
cloth to maintain maximum product performance.
service
We recommend these machines are serviced every 6 to 12 months by a Rexel service engineer –
see back of this booklet for the contact details of your local service centre and for enquiries about
maintenance contracts.
over heating
If the Auto+ 60X is used continuously for over 8 minutes the shredder may overheat and the cool
down indicator will ash red ( ). Please allow the shredder to cool down. When the shredder is
ready to be used the thermometer symbol will no longer illuminate. If the shredder needs to cool
down while shredding, no action is needed. The shredder will automatically restart shredding paper
once it has cooled down after periods of continuous use. All you need to do is ensure paper is
loaded into the chamber and the bin is empty when the machine is cooling down.
rare occasions of jamming
In the unlikely event of the shredder jamming, the Auto+ 60X will stop shredding. Check that the bin
is not full then try clearing the jam using the reverse ( ) and continuous jam boost ( ) switch
then return to Auto mode ( ). If this is unsuccessful follow the reverse function instructions.
4. bin full
Should the shredder stop shredding, the bin may be full. Check rst by looking through the viewing
window and if full you should empty the bin.
• Pull open the bin slowly to empty.
• Push the empty bin back into place and the machine will resume shredding.
bin or loading door open safety function
As a safety precaution, if the bin or loading door is opened during shredding, the shredder will stop.
Altri manuali per Auto+ 60X
3
Indice
Lingue:
Altri manuali Rexel Trituratore
