RGBlink Q16pro Manuale utente
● Each module supports up to 8 video layers
● Each layer support for scaling, moving, crossing and overlying
● Support 4K@60 inputs and outputs
● Each module supports for customized output resolution,single
port's width up to 3840 and height up to 3840
● Optional independent audio input&output modules
● XPOSE visualization operation
● EDID management
Q16pro
Quick Start
© Xiamen RGBlink Science & Technology Co., Ltd.
1
Content
Content...........................................................................................................................................................................1
Install Your Product...................................................................................................................................................... 2
Plug in Power...........................................................................................................................................................2
Connect Input Signal Source...................................................................................................................................2
Connect Output Source...........................................................................................................................................3
Connect control Computer..................................................................................................................................... 3
Connect PVW Module.............................................................................................................................................4
Turn on Your Q16pro...............................................................................................................................................4
Use Your Product......................................................................................................................................................... 5
Search Device.......................................................................................................................................................... 5
Input Setting............................................................................................................................................................6
Output Setting.........................................................................................................................................................8
Display Management............................................................................................................................................ 11
Layer Management............................................................................................................................................... 13
Preset Management..............................................................................................................................................19
XPOSE APP Control................................................................................................................................................21
Contact Information....................................................................................................................................................22
© Xiamen RGBlink Science & Technology Co., Ltd.
2
Install Your Product
Plug in Power
Connect Input Signal Source
Connect power and Q16pro-4 with standard AC Power Cord.
Take Q16pro-4 as example
Q16pro series supports HDMI,DVI,SDI,DP1.2,HDBaseT and other optional input modules.
Connect Q16pro-4 with IP Camera,PC,DVD,laptop and other device as shown in the figure above.
© Xiamen RGBlink Science & Technology Co., Ltd.
3
Connect Output Source
Connect control Computer
Method 1:Direct Connection:Connect Q16pro-4 with computer via network cable as shown in the figure below.It
is suitable for single user to control the device.
Method 2 ：Router Connection:Connect control computer and Q16pro-4 with Router as shown in the figure
below.It supports simultaneous online operation by multiple users.
Q16pro Series supports SDI,DVI,HDMI,HDBaseT and other optional output modules.
Connect Q16pro-4 with monitors.
Q16pro series is operated by XPOSE,so it is necessary to connect device with control computer.
© Xiamen RGBlink Science & Technology Co., Ltd.
4
Connect PVW Module
Q16pro series supports preview input source via control computer or output image via monitor.
Turn on Your Q16pro
LAN:preview input and output
HDMI monitor:preview input source
After connection,slightly press the power button in the front panel to turn on Q16pro.
© Xiamen RGBlink Science & Technology Co., Ltd.
5
Use Your Product
Search Device
3. Click to enter interface as shown in the right
figure
1. Click to enter <System Setting>interface.
2. Find Device ：New version of XPOSE 2.0 is blank
default in Find Device. Users are supposed to choose
the device needed in System Setting.
4. Click the device you need in the <All Devices>
list,as shown in the figure
5. click in the <Chosen Device>.
© Xiamen RGBlink Science & Technology Co., Ltd.
6
Input Setting
Click any input port in purple area, the board where
the port locates is selected. Users can do settings to
the board now. A red rectangle flashes around the
chosen port when it is clicked.
Click to open <Property>and<EDID>
Property Setting
Input Port：chosen port
Scale:
X/Y：the starting horizontal and vertical position
Width/Height : the horizontal and vertical size of
scale
EDID
Input Port: chosen port
Basic Parameters:
EDID Template: RGB-DVI or RGB-HDMI
Monitor Name: type the monitor name
Width/Height/Frequency: type in custom parameters
to meet your needs.
Q16pro’s modules which support EDID are as follows:
●HDMI Input Module (with video)
●HDMI Input Module
●DVI-M Input Module
●DVI-I Input Module
●4K@60 Input Mdule
© Xiamen RGBlink Science & Technology Co., Ltd.
7
H.264 IP Settings
When there is H.264 input module installed on Q16pro,
through the module, Q16pro is able to search and take
the video signal from webcam in the same local
network.
1. Click H.264 port,To make sure H.264 module take
effect, IP setting is required. IP of H.264 should in the
same network section, for example:network IP is
168.192.0.1, IP of H.264 shall be 168.192.0.X (X≠1)
2. Tick “URL”first and then fill in the URL of camera
(Note:URL address must be in RTSP format.The account and
password of camera should be included in the address.
e.g:rtsp://admin:[email protected]:554/cam/realmonitor
?channel=1&subtype=0&unicast=true&proto=Onvif,in which
admin:admin is the account and password of camera)
3. If only one camera’s address is set,click “Set” in the
right directly;If several cameras’ address are set
together,click “set”in the bottom of the page after all
the address being finished.(Note:For the account and
password will be hidden automatically after click“Set”,
repeatedly click“Set” will result in the error address)
4. The camera signal can be seen in the IPC list in
<Display Management>.Drag and drop the IP Port 1.1
to the display directly ,four camera signals will be in
one group to show the four image in only one layer;
Drag and drop the IP Port 1.11/1.12 to the display
respectively,the camera signals will show the image
© Xiamen RGBlink Science & Technology Co., Ltd.
8
Output Setting
Standard Resolutions can be chosen as shown in the right
figure.
Resolution:
Click any output port, the board where the port locates
is selected. Users can do settings to the port now.
A red rectangle flashes around the chosen port when it
is clicked.
OSD
Q16pro module which supports OSD as shown below:
●2K HDMI Output Module(with OSD and background）
Output port : current output port
Status : ON/OFF OSD
Screen Group : current group
X/Y：the starting horizontal and vertical position
Width/Height : the horizontal and vertical size of the text
Font：font of the text,all fonts installed in the computer is
available
Font Type : Normal,Italic,Bold,Bold Italic
Font size : 0-300 pixels
Color : font color
Customize Resolution
Q16pro supports to customize output resolutions.
Click any output port and type in width,Height and Refresh
Rate.
© Xiamen RGBlink Science & Technology Co., Ltd.
9
Steps of OSD Set are as follows：
Precondition: The Display Management of output ports
has been completed before the OSD Set.
1. Open OSD Status.
2. Position: If the width of a single output is 1920 and the
OSD will be displayed on the screen which is spliced by
four outputs horizontally, then type 7680 for width (that
is, the width of the four outputs).
3. Font: choose font type,size and color.
4. After all settings done,click<Set> and the OSD will be
displayed on the screen.
Background : Transparent
Color : background color
Scroll Speed : 0-16
Scroll Direction : Scroll Off, Scroll Left, Scroll Right
Input Text : The exact content of the text.
Save OSD : save what you have set in previous steps
Clear OSD : clear OSD if the setting is not desired
Close All OSD : close all OSD shown on the screen
Altri manuali per Q16pro
2
Indice
Altri manuali RGBlink Commutatore a matrice
