RH T-BASE Manuale utente

Altri manuali RH Luce esterna

Manuali Luce esterna popolari di altre marche

Sealey

Sealey LED37 Manuale utente

nordlux

nordlux VEJERS Guida utente

SImx

SImx ELITE LED LHTC637 Manuale utente

GEV

GEV CAROLINE 10833 Manuale utente

NEBO

NEBO NEB-LSP-0020 Manuale utente

WE-EF

WE-EF PFL540 LED Manuale utente

Lindby

Lindby 9949029 Manuale utente

HEPER

HEPER DOGO Side LW6048.585-US Istruzioni per l'installazione e il funzionamento

HEPER

HEPER LW8034.003-US Istruzioni per l'installazione e il funzionamento

Maretti

Maretti VIBE S 14.6080.04.A Manuale utente

BEGA

BEGA 84 253 Manuale

HEPER

HEPER MINIMO Istruzioni per l'installazione e il funzionamento

LIGMAN

LIGMAN BAMBOO 3 Manuale utente

Maretti

Maretti TUBE CUBE WALL 14.4998.04 Manuale utente

Maxim Lighting

Maxim Lighting Carriage House VX 40428WGOB Manuale utente

urban ambiance

urban ambiance UQL1273 Manuale utente

TotalPond

TotalPond 52238 Manuale utente

Donner & Blitzen

Donner & Blitzen 0-02661479-2 Manuale utente

T-BASE TASK FLOOR LAMP

P A R T S E N C L O S E D

(A) Threaded Collar

(B) Inner Pole

(C) Bulb (1)

(D) Socket

(E) Dimmer Switch

Page 1 of 2

T-BASE TASK FLOOR LAMP

For safety purposes, this lamp is equipped with a polarized plug (one

blade is wider than the other). If the plug does not ﬁt securely into

outlet, do not force it-contact a professional electrician. Use the

plug with an extension cord only if it can be fully inserted into the

cord’s socket. Never alter the plug in any way.

This ﬁxture has been rated for one (1) 4-Watt Type G9 Dimmable

LED lightbulb (included). To avoid the risk of ﬁre, do not exceed

the recommended wattage.

W A R N I N G S

All wires are connected. When unpacking, be careful not to pull

wires, as a bad connection may result. Do not connect electricity

until your ﬁxture is fully assembled. To reduce the risk of ﬁre,

electrical shock, or personal injury, always turn off ﬁxture and allow it

to cool prior to replacing the lightbulb. Do not touch or look directly

at the bulb when ﬁxture is illuminated. Keep ﬂammable materials

away from lit bulb.

W A R N I N G : This product can expose you to lead, which is

known to the State of California to cause cancer and birth defects or

other reproductive harm. For more information, go to

www.P65Warnings.ca.gov.

W A R N I N G : S T R A N G U L A T I O N H AZARD

Keep cord at least 3 feet away from cribs, bassinets, and toddler beds.

Keep out of reach of children under 3 years of age.

A S S E M B LY & I N S T A L L A T I O N

1. Carefully remove all parts from the box and remove all plastic

coverings.

2.

Insert Bulb (C) into Socket (D) by pushing in.

4.

5.

Push the button on Dimmer Switch (E) to desired luminance.

Assembly is complete.

HEIGHT ADJUSTMENT

1. Loosen Threaded Collar (A) in a counterclockwise direction.

2. Adjust lamp by pulling or pushing Inner Pole (B) up or down to

desired height.

3. Tighten the Threaded Collar (A) in a clockwise direction.

CARE INSTRUCTIONS

Wipe all surfaces with a soft, dry cloth. Do not use any harsh cleaners

(including ammonia-based products) or abrasives on your lamp, as they

3. Plug into proper electrical outlet and test ﬁxture.

will damage the ﬁnish.

Page 2 of 2

IMPORTANT SAFETY INSTRUCTIONS

THIS PRODUCT IS NOT A TOY AND HAS NO PLAY

VALUE.