Rice Lake 260-10-1 Manuale utente

Rice Lake 260-10-1 Digital Handrail Scale

Height Rod Accessory

The optional height rod (PN 172958) can be attached to the Rice Lake 260-10-1 Digital Handrail Scale and the

combination provides a single, convenient multipurpose station for obtaining the height and weight of individual

people.

Unpacking the Height Rod

Parts contained in the shipping box

include:

A - Height rod with attached bracket

B - Bracket insert

C - Two screw knobs

Figure 1. Height Rod Parts

After unpacking, visually inspect the height rod to ensure all components are included and undamaged. Contact

Rice Lake Weighing Systems and the shipper immediately if the height rod was damaged during shipping.

Assembling the Height Rod

The height rod must be attached to the Rice Lake 260-10-1 Digital Handrail Scale handrail center post using the

following steps.

1. Place the bracket insert into the bracket. The bracket insert is slightly more flared on one side and this must

be placed toward the height rod. If the bracket insert is placed incorrectly, there will be a gap between the

bracket insert and the outside edge of the bracket. When placed correctly, the outside edges of the bracket

and the bracket insert will fit snugly and be flush.

Incorrect Correct

Gap

Figure 2. Bracket Insert Placement

2. Insert the screw knobs through the holes in the bracket and the

bracket insert.

3. Working from the back of the scale, hold the height rod and hold the

bracket insert and screw knobs in place. While facing the handrail

center post, tilt the top edge of the height rod down and insert it

between the handrail and the left side of the handrail center post. Tilt

the top edge of the height rod up until the rod is vertical.

4. Position the bracket and the screw knobs to line up with the holes in

the back of the handrail center post.

5. Tighten the screw knobs until the bracket is rigid and does not move.

Figure 3. Secure Height Rod Assembly

Verify the Height Rod

Verify the accuracy of the height rod by measuring an object of known height and adjust, if necessary, using the

following steps.

1. Hold the outer sleeve of the height rod to prevent it from dropping down

when the screws are loosened. Loosen the two large screws directly

behind the outer sleeve. Do not remove the screws.

2. Carefully move the outer sleeve of the height rod up or down until it

accurately measures the known height.

3. Tighten the two large screws (finger tight only). Do not over tighten. Do

not use power tools.

Figure 4. Height Rod Adjustment

Using the Height Rod

The height rod can measure heights from 25.5 to 83 inches (65 to 211 cm). The inner rod of the height rod slides

through the outer sleeve, raising and lowering the headpiece to easily accommodate people of different heights.

1. Raise the headpiece until it is perpendicular to the height

rod and snaps into place.

Headpiece

Inner Rod

Read line for less

than 55 inches

Read line for greater

than 55 inches

Outer Sleeve

2. Raise the inner rod of the height rod until the person can

easily stand without touching the headpiece.

3. Have the person step on the scale and stand underneath the

headpiece with their head level.

4. Lower the inner rod of the height rod until the headpiece

just touches the top of the person’s head.

5. For people shorter than 55 inches (139 cm) read the height

measurement at the red line underneath the headpiece. For

people taller than 55 inches (139 cm) read the height

measurement at the red line on the outer sleeve of the

height rod.

Figure 5. Height Rod Measurement Parts.

230 W. Coleman St. • Rice Lake, WI 54868 • USA

U.S. 800-472-6703 • Canada/Mexico 800-321-6703 • International 715-234-9171 • Europe +31 (0)26 472 1319

www.ricelake.com www.ricelake.mx www.ricelake.eu www.ricelake.co.in

Rice Lake Weighing Systems is an ISO 9001 registered company.

PN 173048

December 4, 2015

Altri manuali per 260-10-1

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Rice Lake Scala

Rice Lake

Rice Lake RoughDeck SS Manuale utente

Rice Lake

Rice Lake Digi DI-10 Manuale utente

Rice Lake

Rice Lake Benchmark HD Series Manuale utente

Rice Lake

Rice Lake DIGI DSX-1000 Manuale utente

Rice Lake

Rice Lake RL-650 Series Manuale utente

Rice Lake

Rice Lake ISHIDA WM-Nano Manuale utente

Rice Lake

Rice Lake 150-10-6 Manuale utente

Rice Lake

Rice Lake D400 Manuale utente

Rice Lake

Rice Lake 160-10-7N Manuale utente

Rice Lake

Rice Lake Summit SB-1150 Manuale utente

Rice Lake

Rice Lake IQ plus 2100 Manuale utente

Rice Lake

Rice Lake Uni-9 Series Manuale utente

Rice Lake

Rice Lake Benchmark LP Manuale utente

Rice Lake

Rice Lake TA Plus Series Manuale utente

Rice Lake

Rice Lake 181881 Manuale utente

Rice Lake

Rice Lake 550-10 Istruzioni operative

Rice Lake

Rice Lake Master BS211 Manuale utente

Rice Lake

Rice Lake RS-130 Manuale utente

Rice Lake

Rice Lake 250-10 Series Manuale utente

Rice Lake

Rice Lake BenchPro Series Manuale utente

Rice Lake

Rice Lake DIGI DS-425 Manuale utente

Rice Lake

Rice Lake TE Series Manuale utente

Rice Lake

Rice Lake 350-10-3M Manuale utente

Rice Lake

Rice Lake ISHIDA Uni-3 Manuale utente

Manuali Scala popolari di altre marche

AWS

AWS ZEO-50 Manuale utente

Gima

Gima Glass Body Fat Analyzer Manuale elenco delle parti

Seca

Seca 374 Manuale utente

TEC

TEC TEC SL59 SERIES Manuale utente

Axis

Axis B/E Series Manuale utente

Alecto

Alecto ACW-40 Manuale utente

IKA

IKA RCT basic safety control Manuale utente

ADE

ADE M20011 Manuale utente

Duronic

Duronic KS3000 Manuale utente

Digi

Digi SM-720 Manuale utente

Cardinal

Cardinal CS Series Manuale utente

Korona

Korona Kastella Manuale utente

A&D

A&D FC-50Ki Manuale utente

BDA

BDA CAMARGUE Manuale utente

Tanita

Tanita HD-357 Manuale utente

Leifheit

Leifheit 03173 Manuale utente

Lumme

Lumme LU-1340 Manuale utente

Fidelity Electronics

Fidelity Electronics G2e Manuale utente