Ricoh MP 2000LE Manuale utente
How To
Make a Copy MP 2000Le
1
2
3
4
5
Place the documents on the glass (Face Down) or in the document feeder (Face Up)
Make sure that the screen looks like this – If not press the “Copy” button or press the “Clear
Modes” key.
Enter any required settings e.g.
Lighter / Darker, Text / photo
Enter the number of copies required.
Press the Start Key
How To
Make Double Sided Copies MP 2000Le
Press the Co
py
function ke
y
Press the
[
DUPLEX
]
ke
y
Set the ori
g
inals face u
p
in the document feede
r
Enter an
y
other re
q
uired settin
g
s
Enter the number of co
p
ies re
q
uired
1
6
5
4
3
2
Press the Start ke
y
How To
Sort Copies into Sets MP 2000Le
1
2
3
4
5
Place the documents in the document feeder (Face Up)
Ensure that the screen looks like this, if it does
not then press the “Copy” key or the Clear modes
key.
Enter any required settings e.g. Lighter /
Darker, Text / photo
Press the Sort key
Enter the number of copies using the blue number keys
How To
Reduce or Enlarge a Copy MP 2000Le
1
2
3
4
Place the original onto the glass (Face Down). The
original should be aligned to the rear left hand
corner as shown.
Press the OK Key
Select the paper tray you want to copy from.
Press the R/E key then either select the Enlarge or
Reduce key.
Then
Use the arrow up or down keys to select the ratio
or
(Press the Zoom key and enter the desired ration
with the blue number keys.
5 Press the Start key
How To
Scan to Email MP 2000Le
Press the scanner function key
Press the Destination key for a pre-programmed address or press the manual key and type
in the address to scan to and then press OK
Press the Options key which allows you to change the senders name, resolution, scan size,
file type, etc.
Place your document in the document feeder or on the glass and press the Start key.
If you have any problems scanning to an email address please contact your IT
re
p
resentative or have them contact Ricoh on 0800-807-676
1
3
2
4
How To
Program Scan to Email MP 2000Le
Addresses
1
Select Systems Settings using the Up and Down arrow
keys and then press OK
2 General
General
Tra
If you have any queries then please contact our Helpdesk (through customer services) on 0800-807-676
3
y
Pa
p
er
Tra
y
Pa
p
er
Ke
y
O
p
erator
Key Operator Tools
Select Key Operator Tools using the Up and Down arrow
keys and then press OK
User Code Management
Key Counter Management
4
A
ddress Book Management
5
6
Type in the destination name using the Quick Dial Keys
(Similar to texting) and then press OK
7
Press the OK key to select Program / Change
Enter the registration number that you want to store the
scan to email address under (Using the blue number
keys) and then press OK
Select Address Book Management using the up and
down arrow keys and then press OK
8
9
Press the Dest Key and then use the down arrow key to
highlight Email Settings and then press OK
Type in the email address and then press OK
11
10 To register the email address as a sender (recommended) arrow up and then press OK
Select OFF or ON to re
g
ister a senders
p
assword
(
OFF is recommended
)
12 Press the Cancel key and then press the OK key to save the settings
Press the User Tools / Counter key
How To
MP 2000Le
Program Fax Destinations
1
Select Systems Settings using the Up and Down arrow
keys and then press OK
2
General
General
Tra
y
Pa
p
er
Tra
y
Pa
p
er
Ke
y
O
p
erator
Key Operator Tools
Select Key Operator Tools using the Up and Down arrow
keys and then press OK
3
User Code Management
Key Counter Management
4
A
ddress Book Management
5
6
Type in the destination name using the Quick Dial Keys
(Similar to texting) and then press OK
7
If you have any queries then please contact our Helpdesk (through customer services) on 0800-807-676
Press the OK key to select Program / Change
Using the blue number keys, enter the registration
number to store the Quick Dial in
(e.g. 03=Ricoh NZ 9151-494) and press OK
Select Address Book Management using the up and
down arrow keys and then press OK
8
9
Press the Destination Key
11
10 Using the blue number keys, type in the fax number and press OK
Press the Cancel ke
y
(
To exit the screen
)
12 Press the OK to enter settings and then Press User Tools / Counter key to exit
Press the User Tools / Counter key
Use arrow keys to navigate to Fax settings and press OK
How To
Transmit a Memory
Transmission Fax MP 2000Le
1
2
3
4
5
Make sure that the memory
transmission indicator is lit.
Place the original into the document feeder (Face Up) or on the glass (Face Down)
Dial the number required using the blue number keys, quick dial keys or speed dial keys.
Press the Start Key
The fax is now stored in the machines memory. If the transmission was not successfully sent
with the first attempt, then the machine will redial at 5 minute intervals, another 5 times. After this
an error message will be printed and the fax will be deleted out of the machines memory
Ensure that you are in Fax Mode, if you are not then press the Facsimile Key.
NOTE: If you wish to send the same message to more than one destination, press the OK
key and dial another destination. Repeat this step for all destinations.
How To
Fax an Immediate
Transmission MP 2000Le
1
2
3
4
Place the original into the document feeder (Face Up) or on the glass (Face Down)
Dial the number required using the Blue Number keys, Quick Dial keys or Speed Dial
keys.
Note: You cannot send the same message to multiple destinations. Use the memory
transmission for this.
Press the Start Key
The machine will call the destination. If a successful connection is established then the pages
will be scanned through the document feeder and transmitted.
Once the transmission is complete, the machine will return to Standby mode.
Make sure that you are in FAX mode and that the
immediate transmission is lit. (If this is not the
case then press the transmission mode key)
How To
Cancel a Fax Memory
Transmission MP 2000Le
1
2
3
4
5
Make sure that the machine is in Facsimile
standby mode and that the display is in
Standby or Ready mode
Use the up / down keys to display the file that
you want to delete. (The number you dialed
will be displayed)
Press the Stop TX key
Press the Delete key
The file will now be erased from the machines memory and the machine will return to the
Stand by mode.
Press the Red Clear / Stop key
Indice
Altri manuali Ricoh Fotocopiatrice
Ricoh
Ricoh B003 Manuale utente
Ricoh
Ricoh FT7950 Manuale utente
Ricoh
Ricoh G-P3 Manuale utente
Ricoh
Ricoh Aficio A080 Manuale utente
Ricoh
Ricoh G035 Manuale utente
Ricoh
Ricoh Cor-C1 Series Guida all'installazione
Ricoh
Ricoh MP 2001L Manuale utente
Ricoh
Ricoh Priport DD 4450 Manuale utente
Ricoh
Ricoh Pro C900s Guida rapida
Ricoh
Ricoh M5 Manuale utente
Ricoh
Ricoh FT2012+ Manuale utente
Ricoh
Ricoh Pro C7100 Manuale utente
Ricoh
Ricoh Aficio 2075 Manuale utente
Ricoh
Ricoh A250 Manuale utente
Ricoh
Ricoh A229 Manuale utente
Ricoh
Ricoh M281 Series Manuale utente
Ricoh
Ricoh FT8982 Manuale utente
Ricoh
Ricoh Aficio 1075 Manuale utente
Ricoh
Ricoh FD5000 Manuale utente
Ricoh
Ricoh Aficio 2035 Manuale utente
