Ricoh SR3020 Guida rapida
Booklet Finisher SR3020/SR3110
/Finisher SR3030/SR3120
Machine Code: B804/D637/B805/D636
Field Service Manual
September, 2011
Subject to change
Safety and Symbols
Replacement Procedure Safety
• Turn off the main power switch and unplug the machine before beginning any of the replacement
procedures in this manual.
Symbols Used in this Manual
This manual uses the following symbols.
*: See or Refer to
: Screws
: Connector
: Clip ring
: E-ring
1
TABLE OF CONTENTS
Safety and Symbols............................................................................................................................................1
Replacement Procedure Safety.....................................................................................................................1
Symbols Used in this Manual........................................................................................................................1
1. Replacement and Adjustment
Covers..................................................................................................................................................................5
Exterior Covers...............................................................................................................................................5
Upper Tray, End Fence..................................................................................................................................5
Main Unit.............................................................................................................................................................7
Upper Tray Limit Sensor, Limit Switch...........................................................................................................7
Positioning Roller............................................................................................................................................8
Proof Tray Exit Sensor....................................................................................................................................9
Upper Tray Height Sensors 1, 2...................................................................................................................9
Exit Guide Plate, Upper Tray Exit Sensor...................................................................................................10
Proof Tray Full Sensor..................................................................................................................................11
Finisher Entrance Sensor.............................................................................................................................12
Pre-Stack Tray Exit Sensor...........................................................................................................................12
Stapler Unit.......................................................................................................................................................14
Corner Stapler..............................................................................................................................................14
Positioning Roller..........................................................................................................................................15
Fold Unit............................................................................................................................................................16
Fold Unit........................................................................................................................................................16
Fold Unit Entrance Sensor...........................................................................................................................18
Fold Unit Exit Sensor....................................................................................................................................19
Stack Present Sensor....................................................................................................................................20
Folding Horizontal Skew Adjustment (For B804 only).............................................................................21
Fold Vertical Skew Adjustment (For B804 only).......................................................................................23
Booklet Stapler Unit.........................................................................................................................................25
Booklet Stapler.............................................................................................................................................25
Booklet Stapler Motor.................................................................................................................................25
2. Detailed Section Descriptions
Component Layout...........................................................................................................................................29
General Layout............................................................................................................................................29
Electrical Components.................................................................................................................................31
2
Summary of Electrical Components............................................................................................................35
Drive Layout..................................................................................................................................................44
Junction Gates..................................................................................................................................................45
Proof Mode..................................................................................................................................................45
Shift Mode....................................................................................................................................................46
Staple Mode................................................................................................................................................46
Pre-Stacking .....................................................................................................................................................47
Tray Movement Mechanism............................................................................................................................49
Upper Tray...................................................................................................................................................49
Lower Tray (B804 Only).............................................................................................................................51
Corner Stapling................................................................................................................................................54
Stacking and Jogging..................................................................................................................................54
Stapler Movement.......................................................................................................................................55
Corner Stapling............................................................................................................................................57
Booklet Stapling (B804 Only)........................................................................................................................58
Booklet Pressure Mechanism......................................................................................................................58
Booklet Stapling and Folding ....................................................................................................................59
Booklet Stapling and Folding Mechanisms...............................................................................................65
Upper Tray Output...........................................................................................................................................68
Feed Out.......................................................................................................................................................68
Feed Out Stacking.......................................................................................................................................69
Punch Unit B702 (For B804/B805)..............................................................................................................70
Overview of Operation...............................................................................................................................70
Punch Mechanisms......................................................................................................................................73
Punch Hopper Mechanism..........................................................................................................................76
Finisher Jam Detection.....................................................................................................................................78
3
4
1. Replacement and Adjustment
Covers
Exterior Covers
1. Open the front door [D].
2. Small upper cover [A] ( x1)
3. Upper cover [B] ( x2)
4. Front door bracket [C] ( x1)
5. Front door [D]
6. Front left side cover [E] ( x2)
7. Cover [F]
8. Paper exit cover [G] ( x2)
9. Rear cover [H] ( x2)
Upper Tray, End Fence
1. Remove the rear cover. (* "Exterior Covers")
5
1
1. Support the tray [A] with your right hand.
2. Pull gear [B] toward you ¬ to release.
3. Slowly lower the tray until it stops.
4. Front side cover [C] ( x1)
5. Rear side cover [D] ( x1)
6. Upper tray [E] ( x1)
7. Tray bracket [F] ( x4, x1 shoulder screw ¬)
8. End Fence [G]( x3)
1. Replacement and Adjustment
6
1
Main Unit
Upper Tray Limit Sensor, Limit Switch
1. Front door, front left side cover, rear cover, upper cover (* "Exterior Cover")
2. End fence (* "Upper Tray, End Fence")
3. Upper tray exit mechanism [A] ( x4, x3)
4. Upper tray limit sensor [B] ( x1, x1)
5. Upper tray limit switch [C] ( x2)
Main Unit
7
1
Positioning Roller
1. Open the front door [A].
2. Pull out the stapling unit [B].
3. Positioning roller [C] ( x1, timing belt x1)
1. Replacement and Adjustment
8
1
Questo manuale è adatto per i seguenti modelli
5
Indice
Altri manuali Ricoh Finisher
Ricoh
Ricoh SR3300 Guida rapida
Ricoh
Ricoh SR790 Manuale utente
Ricoh
Ricoh SR4120 Guida rapida
Ricoh
Ricoh DDP70 Manuale utente
Ricoh
Ricoh SR5090 Guida rapida
Ricoh
Ricoh SR400 Manuale utente
Ricoh
Ricoh FS-108R Manuale utente
Ricoh
Ricoh A763 Manuale utente
Ricoh
Ricoh SR3270 Guida rapida
Ricoh
Ricoh SR4110 Guida rapida
