RIDGID AM22650 Manuale utente
AM22650
THREE SPEED
AIR OVER
FOR QUESTIONS OR INFOR ATION CONTACT US AT
1-800-4-RIDGID (1-800-474-3443) from the USand Canada
01-800-701-9811 from exico
www.RIDGIDvacs.com
Part No. SP7007 Printed in China
OWNER’S ANUAL
SAVE THIS ANUAL FOR FUTURE REFERENCE
WARNING:
To reduce the risk of injury, the user must read and understand the owner’s manual
before using this product.
!
Thank you for buying a RIDGID product. • Español - página 13
• Français - page 25
SP7007-1 Air over ESF 2017.qxp_SP7007 1/9/17 10:02 A Page 1
2
Table of Contents
Section Page
Important Safety Instructions . . . . . . . . 2
otor Specifications and Electrical
Requirements . . . . . . . . . . . . . . . . . 3
Introduction . . . . . . . . . . . . . . . . . . . . . . 4
Unpacking and Checking Carton
Contents . . . . . . . . . . . . . . . . . . . . . 4
Operation . . . . . . . . . . . . . . . . . . . . . .5-6
Section Page
Storage . . . . . . . . . . . . . . . . . . . . . . . . . 7
aintenance . . . . . . . . . . . . . . . . . . . . . 8
User Servicing/Troubleshooting
Instructions . . . . . . . . . . . . . . . . . . . 9
Repair Parts . . . . . . . . . . . . . . . . . . 10-11
Warranty . . . . . . . . . . . . . . . . . . . . . . . .12
I PORTANT SAFETY INSTRUCTIONS
Safety is a combination of using common
sense, staying alert, and knowing how your
Air over works.
Safety Signal Words
DANGER: Indicates a hazardous
situation which, if not avoided, will result
in death or serious injury.
WARNING: Indicates a hazardous
situation which, if not avoided, could
result in death or serious injury.
CAUTION: Indicates a hazardous
situation which, if not avoided, could
result in minor or moderate injury.
When using your Air over, always follow
basic safety precautions including the
following:
WARNING
- To reduce the risk of fire, electric
shock, or injury:
• Read and understand this manual and
all labels on the Air over before
operating.
• Use only as described in this manual.
• To reduce the risk of electric shock, do
not expose to rain, or immerse in or use
in standing water. Store indoors only.
• Use only with GFCI-protected outlets.
• When storing, do not stack Air overs
more than 3 units high.
• Do not use an extension cord with this
Air over.
• Electrical appliances can ignite
flammable vapors or dust. Do not use
near combustible liquids, gases,
or dusts.
!
!
!
!
• Do not leave plugged into outlet when
not in use or when servicing. Turn off
before unplugging.
• To reduce the risk of stirring up and
inhaling toxic vapors, do not use near
toxic or hazardous materials.
• Never operate with safety grills
removed.
• This unit has an automatically-operated
protective device which may shut down
the unit during operation. Unplug before
servicing or cleaning.
• Do not use with solid state speed
control device.
• This fan is not intended for use by
persons (including children) with
reduced physical, sensory, or mental
capabilities, or lack of experience and
knowledge, unless they have been
given supervision or instruction
concerning use of the appliance by a
person responsible for their safety.
• Do not allow to be used as a toy.
Close attention is necessary when
used by or near children.
• Do not unplug by pulling on cord.
To unplug, grasp the plug, not the cord.
• Do not use with damaged cord, plug,
or other parts.
• If your Air over is not working as it
should, has missing parts, has been
dropped, damaged, left outdoors,
or dropped into water, call customer
service.
• Do not pull or carry by cord, use cord as
handle, close a door on cord, or pull
cord around sharp edges or corners.
Keep cord away from heated surfaces.
SP7007-1 Air over ESF 2017.qxp_SP7007 1/9/17 10:02 A Page 2
3
otor Specifications and
Electrical Requirements
SAVE THIS ANUAL
This Air over is provided with a 3-speed,
120 volt, 60 Hz induction motor with a
grounding conductor. It is thermally
protected and will automatically shut down
if over-heated. Once it cools, the motor
will restart automatically if not unplugged.
In the event of a malfunction or
breakdown, grounding provides a path of
least resistance for electric current to
reduce the risk of electric shock. This Air
• To reduce the risk of electric shock,
connect only to a GFCI-protected
outlet.
• Do not expose to water or rain.
• This motor has an automatic
temperature shutoff device; it may
restart without notice. To reduce
the risk of injury, unplug before
servicing.
• Do not use an extension cord with
this blower.
• To reduce the risk of tip-over
during storage, do not stack more
than 3 high.
• Do not exceed 8.9 Amps through
receptacles.
• Do not run cord under carpeting. Do not
cover cord with throw rugs, runners,
or similar coverings. Do not route cord
under furniture or appliances. Arrange
cord away from traffic area and where it
will not be tripped over.
• Do not handle plug, switch, or the Air
over with wet hands.
• Observe the 8.9 Amp maximum outlet
rating when daisy-chaining units
together.
• Keep hair, loose clothing, fingers, and all
parts of body away from openings and
moving parts.
• Direct air discharge only at work area.
Do not direct air at bystanders.
• All disassembly and repairs should be
performed by qualified personnel.
• Do not operate any fan with a
damaged cord or plug. Discard fan or
return to an authorized service facility
for examination and/or repair.
Observe the following warnings that
appear on the motor housing of your
Air over:
CAUTION:
• For dusty operations, wear dust mask.
• Do not move or carry Air over when
it is operating.
• Only operate on a level and stable
surface to prevent it from falling and
possibly causing injury or damage to
unit.
!
!
over is equipped with an electric cord
having an equipment grounding conductor
and a grounding plug. The plug must be
plugged into a matching outlet that is
properly installed and grounded in
accordance with all local codes and
ordinances.
Do not modify the plug provided. If it will
not fit the outlet, have the proper outlet
installed by a qualified electrician.
WARNING
SP7007-1 Air over ESF 2017.qxp_SP7007 1/9/17 10:02 A Page 3
Carrying
Handle
Grounded
Outlets (2)
On/Off
Switch
Cord Wrap
Area
Foot
Bumpers (6)
Adjustable
Air Outlet
Circuit Breaker
Reset Button
Introduction
Air overs are designed to move large volumes of air. They are used to dry wet carpets,
floors and furniture. They may also be used for ventilation.
Unpacking and Checking Carton Contents
Carefully unpack and inspect your Air over. Call 1-800-4-RIDGID (1-800-474-3443) or
E-mail us at [email protected] if any parts are damaged or missing.
4
SP7007-1 Air over ESF 2017.qxp_SP7007 1/9/17 10:02 A Page 4
5
Operation
Foot Bumpers
(4 bumpers on bottom of unit)
Foot Bumpers
(2 bumpers on back of unit)
Carry
Handle
Floor & Carpet 90° Ceilings & Ventilation
Foot Bumpers
(2 bumpers on bottom back of unit &
2 bumpers on back of unit)
45° Walls & Ventilation
Place Air over in desired operating position:
SP7007-1 Air over ESF 2017.qxp_SP7007 1/9/17 10:02 A Page 5
UNITS 3 & 2 DAISY-CHAINED (PLUGGED IN) TO UNIT 1
Units 3 & 2 Daisy-Chained
to Unit 1 Unit 1 Plugged into
a GFCI Protected Outlet
UNIT 3
UNIT 2
UNIT 1 GFCI
Protected
Outlet
6
EACH UNIT DAISY-CHAINED (PLUGGED IN) TO THE NEXT UNIT
Unit 2 Daisy-Chained
to Unit 1 Unit 1 Plugged into
a GFCI Protected Outlet
UNIT 3
UNIT 2
UNIT 1 GFCI
Protected
Outlet
Unit 3 Daisy-Chained
to Unit 2
Daisy-Chain
This RIDGID Air over (A 2265) can be
daisy-chained. If utilizing the Daisy-Chain
feature, only use devices that total less
than the recommended 8.9 Amp maximum
outlet rating. The 9 Amp on-board circuit
breaker will allow up to four (4) additional
A 2265 Air overs to run on one circuit at
the same time.
NOTE: This Air over has an on-board
9 Amp circuit breaker. If the auxiliary outlet
overloads, the circuit breaker will trip.
If the circuit breaker does trip, turn the
switch to the off position and unplug all
units then press the circuit breaker reset
button. Plug the units back into the power
source. The outlets on the Air over will
be actively powered when the Air over is
plugged in and the circuit breaker is
properly reset.
Operation (continued)
SP7007-1 Air over ESF 2017.qxp_SP7007 1/9/17 10:02 A Page 6
7
When stacking units, position the
Air over on its side as shown, with
the electrical outlets facing down.
For convenience purposes for storage,
the circular recessed area around the
intake will nest into the next Air over
stacked. The exhaust vents must be
slightly staggered as shown, to ensure
stability.
Rotate Unplugged Unit, Outlet Down
Stack 3 High Only, Outlet Facing Down
on Each Unit and Slightly Staggered
Outlet
Facing
Down
Intake Vent
Outlet
Facing
Down
Outlet
Facing
Down
Storage
CAUTION: Do not operate
Air over when stacked on top of
each other.
!
WARNING: To reduce the risk of
tip-over during storage, do not stack
more than 3-high.
!
SP7007-1 Air over ESF 2017.qxp_SP7007 1/9/17 10:02 A Page 7
8
aintenance
Cord aintenance
When use is complete, unplug the cord
and wrap it around the cord wrap area as
shown. If the power cord is damaged,
it must be replaced by the manufacturer or
their service agent or by qualified
personnel in order to reduce the risk of
accident.
Storage
Before storing your Air over, the cord
should be wrapped around the unit.
The Air over should be stored indoors.
Cleaning Your Air over
If the polypropylene housing becomes
soiled it may be wiped off with a damp
cloth.
Cord Wrap
Area
Carrying
Handle
WARNING: After servicing, any
safety device (includes grilles,
impeller, etc.) must be reinstalled or
remounted.
!
SP7007-1 Air over ESF 2017.qxp_SP7007 1/9/17 10:02 A Page 8
9
User Servicing / Troubleshooting
Instructions
!
!
WARNING: Unplug before any disassembly or servicing.
WARNING: All disassembly and repairs should be performed by qualified
personnel.
PROBLE CAUSE SOLUTION
Unit will not run. 1. No power to unit. 1. Plug unit in. Check circuit breaker.
2. Switch not on. 2. Place in “ON” position.
3. Circuit breaker tripped. 3. Reset circuit breaker.
Unit runs but Air 1. Unit has been severely jolted 1. Contact customer service.
over makes causing blower wheel to rub
loud scraping against housing or housing
noise. to deform.
Unit runs but 1. Dirt build up on one side of 1. Clean blower wheel blades.
vibrates Air over blower wheel.
excessively. 2. Severe jolt has bent motor shaft. 2. Contact customer service.
Unit runs but 1. Blower wheel is jammed 1. Contact customer service.
blower wheel against housing.
does not turn.
Unit runs briefly, 1. Intake grille and /or exhaust 1. Remove obstruction.
then shuts off grille is obstructed.
on overload. 2. otor bearings are failing or 2. Contact customer service.
motor has developed an
internal electrical fault.
SP7007-1 Air over ESF 2017.qxp_SP7007 1/9/17 10:02 A Page 9
10
Repair Parts
RIDGID Three Speed Air Mover
Model Num er AM22650
RIDGID parts are availa le on-line at www.RIDGIDparts.com
Always order by Part Number - Not by Key Number
Key No. Part No. Description
1 841135 Intake Vent with Hardware
2 840803 Switch Knob
3 840804 Adjustable Air Outlet Vent
4 841134 Rubber Feet with Hardware (6 Pack)
5 SP7007 Owner’s anual (Not Illustrated)
AM22650 120 V, 2.1 A, 60 Hz. (Blower Only)
120 V, 11.1 A, 60 Hz. (Total Blower and Receptacles)
Electrical Ratings:
SP7007-1 Air over ESF 2017.qxp_SP7007 1/9/17 10:02 A Page 10
Indice
Lingue:
Altri manuali RIDGID Soffiatore
