Riedel Bolero Beltpack Manuale utente
Bolero Beltpack
Quick Start Guide
A00
03-300HB01EG
DRAFT
© 2017 RIEDEL COMMUNICATIONS GmbH & Co KG. ALL RIGHTS RESERVED.
UNDER THE COPYRIGHT LAWS, THIS MANUAL MAY NOT BE COPIED, IN WHOLE OR IN PART, WITHOUT THE WRITTEN CONSENT OF RIEDEL. EVERY
EFFORT HAS BEEN MADE TO ENSURE THAT THE INFORMATION IN THIS MANUAL IS ACCURATE. RIEDEL IS NOT RESPONSIBLE FOR PRINTING OR
CLERICAL ERRORS. ALL TRADEMARKS ARE THE PROPERTY OF THEIR RESPECTIVE OWNERS.
This device complies with Part 15 of the FCC Rules and with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference
at his own expense.
Changes or modifications made to this equipment not expressly approved by Riedel may void the FCC authorization to operate this equipment.
Radiofrequency radiation exposure Information:
For body worn operation, this equipment has been tested and meets the FCC RF exposure guidelines when used with the Riedel accessories supplied or designated for this
product. Use of other accessories may not ensure compliance with FCC RF exposure guidelines.
DRAFT
Bolero Beltpack Quick Start Guide A00
CONTENT
1Preface 4
Information ........................................................................................................................................................ 51.1
About Bolero ...................................................................................................................................................... 81.2
2Bolero Beltpack 9
Operating Elements .......................................................................................................................................... 92.1
Status LEDs ...................................................................................................................................................... 112.2
Getting Started ................................................................................................................................................ 122.3
Technical Specifications .................................................................................................................................. 132.4
3Appendix 14
Service .............................................................................................................................................................. 143.1
Notes ................................................................................................................................................................ 153.2
Index .............................................................................................................................................................................. 17
DRAFT
4
Bolero Beltpack Quick Start Guide A00
1 Preface
Thank you for choosing a Riedel product.
This PDF document provides detailed information about the Bolero Beltpack, pin outs, mechanical and electrical data.
For further information, please refer to the Riedel Website or contact your local distributor or the Riedel headquarters
in Wuppertal.
NOTICE
This manual, as well as the software and any examples contained herein are provided “as is” and are subject to change
without notice. The content of this manual is for informational purpose only and should not be construed as a
commitment by Riedel Communications GmbH & Co. KG & Co. KG or its suppliers. Riedel Communications GmbH & Co.
KG & Co. KG gives no warranty of any kind with regard to this manual or the software, including, but not limited to, the
implied warranties of merchantability and fitness for a particular purpose. Riedel Communications GmbH & Co. KG &
Co. KG shall not be liable for any errors, inaccuracies or for incidental or consequential damages in connection with the
furnishing, performance or use of this manual, the software or the examples herein. Riedel Communications GmbH &
Co. KG & Co. KG reserves all patent, proprietary design, title and intellectual property rights contained herein, including,
but not limited to, any images, text, photographs incorporated into the manual or software.
All title and intellectual property rights in and to the content that is accessed through use of the products is the
property of the respective owner and may be protected by applicable copyright or other intellectual property laws and
treaties.
03-300HB01EG-A00
Bolero Beltpack Quick Start Guide
© April 2017 Copyright Riedel Communications GmbH & Co. KG. All rights reserved.
Reproduction, adaptation, or translation of this manual in whole or in part is prohibited without prior written
permission of Riedel Communications GmbH & Co. KG, except as allowed under the copyright laws.
All other trademarks are the property of their respective owner.
DRAFT
5
Bolero Beltpack Quick Start Guide A00
1.1 Information
Symbols
The following tables are used to indicate hazards and provide cautionary information in relation to the
handling and use of the equipment.
Danger
!
Indicates an imminently hazardous situation which, if not avoided, will result in death or
serious injury.
The highlighted line indicates the activity to prevent the danger.
Warning
!
Indicates a potentially hazardous situation which, if not avoided, could result in death or
serious injury.
The highlighted line indicates the activity to prevent the danger.
Caution
!
Indicates a potentially hazardous situation which, if not avoided, may result in minor or
moderate injury. It may also be used to alert against unsafe practices.
The highlighted line indicates the activity to prevent the danger.
This text is for generally information. It indicates the activity for ease of work or for better
understanding.
Service
·All service has to be undertaken ONLY by qualified service personnel.
·There are no user serviceable parts inside the devices.
·Do not plug in, turn in or attempt to operate an obviously damaged device.
·Never attempt to modify the equipment components for any reason.
Caution
!
All adjustments have been done at the factory before the shipment of the devices.
No maintenance is required and no user serviceable parts are inside the module.
DRAFT
6
Bolero Beltpack Quick Start Guide A00
Voltage
·The power cable should only be connected to a correctly grounded source.
·Do not use any adapters.
·Never bypass a ground contact.
Danger
!
To reduce the risk of electric shock do not remove cover or expose the products to
rain or moisture.
Warning
!
Laite on liitettävä suojakoskettimilla varustettuun pistorasiaan.
Apparatet må tilkoples jordet stikkontakt.
Apparaten skall anslutas till jordat uttag.
Environment
·Never place the devices in an area of high dust particles or humidity.
·Never expose the device to any liquids.
·If the devices have been exposed to a cold environment and transferred to a warm environment,
condensation may form inside the housing. Wait at least 2 hours before applying any power to the
devices.
Declaration of Conformity
The devices conforms to the EU guidelines
EMV (EMC) 2014/30/EU
NSR (LVD) 2014/35/EU
RTTE (RED) 2014/53/EU
as attested by the CE mark.
FCC IDs:
·YFJANT101019 (Bolero DECT Antenna / BL-ANT-1010-19)
·YFJBPK100619 (Bolero Wireless Beltpack / BL-BPK-1006-19)
Industry Canada ICs:
·8706A-ANT101019 (Bolero DECT Antenna / BL-ANT-1010-19)
·8706A-BPK100619 (Bolero Wireless Beltpack / BL-BPK-1006-19)
Standards:
·EN 300 328 V1.9.1 / ETSI EN 300 328 V2.0.20
·EN 300 330 V1.8.1 / ETSI EN 300 330V2.1.0
·EN 301 406 V2.2.1
·EN 301 489-1/-3/-6/-17, EN 55022, EN 55024
·IEC/EN 60950-1/-22
·ARIB STD-T66
·ARIB STD-T101
DRAFT
7
Bolero Beltpack Quick Start Guide A00
Disposal
Disposal of old Electrical & Electric Equipment (Applicable throughout the European Union and other
European countries with separate collection programs)
This symbol, found on your product or on its packaging, indicates that this product should
not be treated as household waste when you wish to dispose of it. Instead, it should be
handed over to an applicable collection point for the recycling of electrical and electronic
equipment. By ensuring this product is disposed of correctly, you will help prevent
potential negative consequences to the environment and human health, which could
otherwise be caused by inappropriate disposal of this product. The recycling of materials
will help to conserve natural resources. For more detailed information about the recycling
of this product please contact your local city office.
DRAFT
8
Bolero Beltpack Quick Start Guide A00
1.2 About Bolero
Bolero Wireless Intercom
The Riedel Bolero Wireless Intercom system is a digital, easy to use full-duplex communications solution for broadcast,
security, industrial and theater applications as well as for sports and cultural events.
Bolero takes a completely new approach to wireless communications, pushing it beyond the limits of existing wireless
intercom solutions.
Riedel's Bolero Wireless Intercom solution utilizes the benefits of the Digital Enhanced Cordless Telecommunications
(DECT) standard’s base layer. This provides a license-free, cellular architecture with seamless hand-over between cells,
allowing each Bolero Wireless Beltpack to continuously monitor and automatically select the best connection to the
Antenna. The audio transmission takes place directly via the antennas. There is no need for additional devices.
Light and powerful custom lithium rechargeable battery packs are used for the Beltpack and the Antenna to provide
UPS power. Battery packs are able to charge inside the Beltpack, the Antenna as well as separately in the charger.
What is Bolero?
·Digital Wireless Intercom System
·based on the DECT standard
Riedel Bolero - Key Features
·Wireless Partyline and point-to-point
communications
·4 Wireless Partylines
·Cellular architecture with seamless hand-over
·Up to10 individually addressable Wireless Beltpacks
can be connected at the same time at one Antenna
·Excellent audio quality via VoIP-over-DECT
technology (license-free worldwide)
·Connection of antennas via existing Ethernet
infrastructure (PoE)
·No interference with radio microphones, In Ear
Monitoring (IEM) or other UHF systems
DRAFT
9
Bolero Beltpack Quick Start Guide A00
2Bolero Beltpack
The Bolero Wireless Beltpack is a light and compact, digital headset station with two individually configurable channels
for intercom and IFB use. Two rotary level controls on the front of the Beltpack allows volume-control for each channel.
Pushing the Talk key toggles talk on/ off with momentary or latching operation. Activation is indicated by a Talk LED,
and a bright call light indicates an incoming call. The Beltpack features a color display which by default shows the labels
for the four function keys. In addition, the display gives the user access to the intuitive configuration menu. The Bolero
Wireless Beltpack has an XLR connector for headset and an USB port for firmware updates. A fully charged Bolero
rechargeable Battery allows for 15 hours of operation. The rugged housing with rubber protectors houses the internal
antenna.
2.1 Operating Elements
Figure 1: Beltpack (front/top and rear/bottom view)
Display
Mounting holes
Walkie-Talkie keys 5+6 (side)
Rotary encoder (B)
Speaker
Microphones
Channel keys 1...4 (top)
Rotary encoder (A)
Menu key
Reply key
NFC contact point
Belt clip
Charging contacts
Battery release button
Power button
Headset connector (XLR-4)
Line-In, Charging sockets (3.5mm jack / USB Type-C)
Bottle opener
Battery
DRAFT
10
Bolero Beltpack Quick Start Guide A00
XLR-4 (male)
The headset connector is a 4-pole male XLR connector and supports mono headsets with electret or dynamic
microphones, depending on the menu setting.
1
23
4
Pin
Headset
1
Microphon -
2
Microphon + (+5 VDC)
3
Earphones -
4
Earphones +
Figure 2: XLR 4 male
The microphone power (+5 VDC) will be switched on/off according to the menu setting.
3.5mm jack (female)
The 3.5 mm jack is a line input connector.
2
1
Pin
Line In 3.5mm jack
1
+
2
-
Figure 3: 3.5mm jack female
USB Type-C
The USB connector allows to charge the Beltpack.
Furthermore the connector is used for firmware updates.
A1 A12
B12 B1
Pin
Ladebuchse
Pin
Ladebuchse
1
GND
7
Dn1
2
SSTXp1
8
SBU1
3
SSTXn1
9
VBUS
4
VBUS
10
SSRXn2
5
CC1
11
SSRXp2
6
Dp1
12
GND
Figure 4: USB Type-C
Charging is only possible with >500 mA USB ports. 100 mA are not supported.
DRAFT
Indice
Altri manuali Riedel Sistema di interfono
Riedel
Riedel Bolero 3.1 Manuale utente
Riedel
Riedel PUNQTUM Q210 P Manuale utente
Riedel
Riedel Performer CR-4 Manuale utente
Riedel
Riedel Punqtum Q Series Manuale utente
Riedel
Riedel BP-2002 Manuale utente
Riedel
Riedel MediorNet Manuale utente
Riedel
Riedel Acrobat WB-2 Manuale utente
Riedel
Riedel Bolero Manuale utente
Riedel
Riedel Punqtum Q110 Manuale utente
Riedel
Riedel Acrobat WB-2 Manuale utente
