Rimage Everest Manuale utente

Altri manuali per Everest

6

Questo manuale è adatto per i seguenti modelli

1

Indice

Altri manuali Rimage Duplicatore di dischi

Rimage

Rimage 2000i 6.5-7.1 Service Pack 1 Manuale di istruzioni

Rimage

Rimage AMIGO II EVEREST Istruzioni per l’uso

Rimage

Rimage Allegro 20 Istruzioni operative e di sicurezza

Rimage

Rimage Everest Istruzioni operative e di sicurezza

Rimage

Rimage Professional 5100N Manuale utente

Rimage

Rimage 2000i 6.5-7.1 Service Pack 1 Manuale utente

Rimage

Rimage 2000i 6.5-7.1 Service Pack 1 Manuale utente

Rimage

Rimage Producer 8200N Manuale utente

Rimage

Rimage Producer IIIN+ 7100N Istruzioni per l'installazione

Rimage

Rimage 2000i 6.5-7.1 Service Pack 1 Manuale utente

Rimage

Rimage DLN5200 Manuale utente

Rimage

Rimage Producer III 7100 Manuale utente

Rimage

Rimage 2000i 6.5-7.1 Service Pack 1 Manuale utente

Rimage

Rimage DL5200 Manuale utente

Rimage

Rimage Professional 5100N Manuale utente

Rimage

Rimage DL5200 Manuale utente

Rimage

Rimage DL5200 Istruzioni operative e di sicurezza

Rimage

Rimage Producer III 7100 Manuale utente

Rimage

Rimage Professional Endeavor Manuale utente

Rimage

Rimage Professional 2450 Istruzioni operative e di sicurezza

Rimage

Rimage Producer III 8100 Manuale

Rimage

Rimage Producer IIIN+ 7100N Manuale utente

Rimage

Rimage 2000i 6.5-7.1 Service Pack 1 Istruzioni operative e di sicurezza

Rimage

Rimage DL5200 Manuale utente

Manuali Duplicatore di dischi popolari di altre marche

Riso

Riso CV Series Manuale

MicroBoards Technology

MicroBoards Technology GX-2 Manuale utente

Addonics Technologies

Addonics Technologies HDUS325DX Manuale utente

Carry

Carry Pro118 Manuale utente

CopyPro

CopyPro PowerPro II Manuale utente

Primera

Primera Max Manuale utente

Logicube

Logicube EchoPlus-NG Manuale utente

Silca

Silca Delta 2000 SA Manuale utente

Reflex7

Reflex7 Daisy Chain Series Manuale utente

Vinpower Digital

Vinpower Digital SharkCopier DC Manuale utente

Codonics

Codonics Virtua E Manuale utente

Octave

Octave Copy Master II Manuale utente

Kanguru

Kanguru U2-DVDDUPE-S Manuale utente

StarTech.com

StarTech.com 8STSATDUP11 Manuale utente

DUPLO SEIKO CORPORATION

DUPLO SEIKO CORPORATION Duprinter DP-460 Manuale utente

Addonics Technologies

Addonics Technologies UDFH7 Manuale utente

Vinpower Digital

Vinpower Digital MiniLoader VDX-1 Manuale utente

Addonics Technologies

Addonics Technologies CFASTD5 Manuale utente

Recovery Disc Instructions for the Producer III Embedded

Producer III Embedded Recovery Disc

Instructions (Everest Printer)

This is an emergency system recovery process and should be used to recover the system’s

default configuration.

-Important: Ensure there are no other embedded Rimage AutoLoaders named

RimageProducer3 actively running on the network.

Note: If this unit is not attached to a network, a monitor, mouse and keyboard must be

connected to the back of the embedded unit.

1. With the unit powered on:

a. Insert the Recovery Disc in the recorder tray marked Drive 1 (top drive).

b. Press and hold the PC power button on the front of the unit until the unit powers off.

c. Press the PC power button again to power on the unit.

2. The application starts automatically and recovery begins.

3. When the operator panel displays REMOVE DISC THEN REBOOT SYSTEM (approximately

10 minutes):

a. Remove the recovery disc from the recorder tray.

b. Press and hold the PC power button until the unit powers off.

c. Press the PC power button again to power on the unit. The system initializes.

4. Watch the operator panel for the prompt: REMOTE LOGON TO: RIMAGEPRODUCER3

(approximately 5 minutes).

5. Continue the recovery:

•If the unit is attached to a network, log on to the system using Remote Desktop

Connection on a separate computer.

Note: See the Rimage Advanced Setup Guide for instructions on accessing the

Remote Desktop Connection.

Computer: RimageProducer3

User Name: Administrator

Password: password

Note: The Password is case sensitive.

Domain: leave blank

•If the unit is not attached to a network, continue the recovery process using the attached

monitor, mouse and keyboard.

6. The Found New Hardware Wizard for the Everest III printer drive displays:

a. Select Install the software automatically (Recommended).

b. Select Next.

c. Select Finish when the installation is complete.

7. From the desktop, select Restart found on the computer desktop. A system shutdown

message displays.

8. When the system has fully initialized, log on to the system. Refer to step 5 for log on

information.

Note: You cannot log on until the system initializes. This may take several minutes.

9. Change the computer name (optional). See the Rimage Advanced Setup Guide for

instructions.

2000026_A 1