RIVATECH RC3510 Manuale utente
1
www.rivatech.de
RC3510
RC3510RC3510
RC3510
Installation Guide
Installation GuideInstallation Guide
Installation Guide
2
www.rivatech.de
INFORMATION TO USER
INFORMATION TO USERINFORMATION TO USER
INFORMATION TO USER
CAUTION
RISK OF ELECTRIC S OCK,
DO NOT OPEN
CAUTION: TO REDUCE T E RISK OF ELECTRIC S OCK,
DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SEERIVCE PERSONEL.
This symbol is intended to alert the user to the presence of un-
insulated “dangerous voltage” within the product’s enclosure that
may be of sufficient magnitude to constitute a risk of electric
shock to persons.
This symbol is intended to alert the user to the presence of
important operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
!
!
3
www.rivatech.de
Table of Contents
Table of ContentsTable of Contents
Table of Contents
1.
1.1.
1.
FEATURES
FEATURESFEATURES
FEATURES ................................................................................ 5
2.
2.2.
2.
PACKAGE CONTENTS
PACKAGE CONTENTSPACKAGE CONTENTS
PACKAGE CONTENTS ................................................................. 6
3.
3.3.
3.
PART
PARTPART
PART
NAMES
NAMESNAMES
NAMES ........................................................................... 7
3.1.Internal View ................................................................................. 7
4.
4.4.
4.
INSTALLA
INSTALLAINSTALLA
INSTALLATION
TIONTION
TION ........................................................................ 10
4.1. Installation Template .................................................................... 11
4.2. Setting the Lens Position .............................................................. 11
4.3. Setting the Image Attribute ........................................................... 12
4.4. Operating the OSD Menu .............................................................. 12
5.
5.5.
5.
CONNECTIONS
CONNECTIONSCONNECTIONS
CONNECTIONS ........................................................................ 13
5.1. Connectors ................................................................................ 13
6.
6.6.
6.
CONFIGURATION
CONFIGURATIONCONFIGURATION
CONFIGURATION...................................................................... 16
6.1.Set up network environment .......................................................... 16
6.2. View video on web page ............................................................... 16
6.2.1. View video using IPAdmin Tool ................................................. 17
6.2.2.View video using IP address ..................................................... 18
6.3. Reset ........................................................................................ 18
6.4. Factory Default ........................................................................... 18
APPENDIX (A): SPECIFICATIONS
APPENDIX (A): SPECIFICATIONSAPPENDIX (A): SPECIFICATIONS
APPENDIX (A): SPECIFICATIONS ..................................................... 19
Summary .......................................................................................... 19
Environment Condition ........................................................................ 20
APPENDIX (B):
APPENDIX (B): APPENDIX (B):
APPENDIX (B): POWER OVER ET ERNET
POWER OVER ET ERNETPOWER OVER ET ERNET
POWER OVER ET ERNET ......................................... 22
PoE compatibility ................................................................................ 22
Power classification ............................................................................ 22
APPENDIX (
APPENDIX (APPENDIX (
APPENDIX (C
CC
C): DIMENSIONS
): DIMENSIONS): DIMENSIONS
): DIMENSIONS .......................................................... 23
4
www.rivatech.de
APPENDIX (
APPENDIX (APPENDIX (
APPENDIX (C
CC
C):
): ):
): EXADECIMAL
EXADECIMALEXADECIMAL
EXADECIMAL-
--
-D
DD
DECIMAL
ECIMALECIMAL
ECIMAL
C
CC
CONVERSION
ONVERSIONONVERSION
ONVERSION
T
TT
TABLE
ABLEABLE
ABLE ............. 24
REVISION ISTORY
REVISION ISTORYREVISION ISTORY
REVISION ISTORY ....................................................................... 25
5
www.rivatech.de
1
11
1.
..
.FEATURES
FEATURESFEATURES
FEATURES
Camera
CameraCamera
Camera
•Indoor/Outdoor Dome IP Camera (Vandal Proof)
•igh Quality Compression in real time streaming
•Sony 1/3” Super AD CCD & igh Quality SS- Q1 Full Kit Chip Set
Sony 1/3" Vertical Double Density Color CCD (Optional)
•True Day / Night (ICR) and WDR (Optional)
•Improvement of color rolling suppression
Streaming
StreamingStreaming
Streaming
•Dual streaming mode (such as different codec/resolution/bit rate and so on.)
•De-interlacing on DSP
•Burnt-in text supported
•Unicast/Multicast supported
Video/Audio
Video/AudioVideo/Audio
Video/Audio
•Video compression: .264/MPEG/MJPEG, 25/30FPS@D1(PAL/NTSC)
•Audio compression: G.711(µLaw, aLaw)/PCM
•Analog video out for external monitors
•Video Motion Detection supported
•Two-way mono audio supported
Network
NetworkNetwork
Network
•RTSP/ TTP protocol supported
•10/100 Base-T Ethernet
Additional Features
Additional FeaturesAdditional Features
Additional Features
•Micro SD card supported
•PoE supported
•Built-in Video Content Analysis
•OSD supported
•SDK (Software Development Kit) provided
VCA (Video
VCA (VideoVCA (Video
VCA (Video
Content Analysis)
Content Analysis)Content Analysis)
Content Analysis)
•VCA Presence (Included as basic)
•VCA Surveillance (Optional)
6
www.rivatech.de
2
22
2.
..
.
PACKAGE CONTENTS
PACKAGE CONTENTSPACKAGE CONTENTS
PACKAGE CONTENTS
Unpack carefully and handle the equipment with care. The packaging contains:
Camera
CameraCamera
Camera
DC power adaptor
DC power adaptorDC power adaptor
DC power adaptor
DC Jack Cable
DC Jack CableDC Jack Cable
DC Jack Cable
7
77
7-
--
-p
pp
pin
in in
in and 2
and 2and 2
and 2-
--
-pin
pin pin
pin terminal block
terminal blockterminal block
terminal block
Video out cable
Video out cableVideo out cable
Video out cable
Screws
ScrewsScrews
Screws
Camera hole cover and opener
Camera hole cover and openerCamera hole cover and opener
Camera hole cover and opener
ex wrench driver
ex wrench driverex wrench driver
ex wrench driver
Installation
Installation Installation
Installation t
tt
template
emplateemplate
emplate
Silicon waterproof band
Silicon waterproof bandSilicon waterproof band
Silicon waterproof band
Quick installation guide
Quick installation guideQuick installation guide
Quick installation guide
The above contents are subject to change without prior notice.
Note
i
7
www.rivatech.de
3
33
3.
..
.PART
PARTPART
PART
NAMES
NAMESNAMES
NAMES
3
33
3.
..
.1
11
1.Internal View
.Internal View.Internal View
.Internal View
1
11
1Focus puller
Focus pullerFocus puller
Focus puller
The focus puller is for adjusting the focus of the image focus. Move this puller left
or right and set to the desired focus. Refer to
4.2. Setting the Lens Position
for
more details.
2
22
2Zoom puller
Zoom pullerZoom puller
Zoom puller
The zoom puller is for setting the zoom position. Move this puller left or right and
set to the desired zoom position. Refer to
4.2. Setting the Lens Position
for more
details.
3
33
3Audio and IO terminal connector
Audio and IO terminal connectorAudio and IO terminal connector
Audio and IO terminal connector
A 7-pin terminal block is included in the device package. Connect this terminal block
into this connector for cable connection of audio input/output and digital
input/output. Refer to
5.1. Connector
for more details.
①
②
③
④
⑤
* Models herein and their
appearance are subject to
change
without any prior notice.
8
www.rivatech.de
4
44
4LAN connector
LAN connectorLAN connector
LAN connector
This is a RJ45 LAN connector for 10/100 Base-T Ethernet.
5
55
5Power Adap
Power AdapPower Adap
Power Adaptor Connector (DC 12V)
tor Connector (DC 12V)tor Connector (DC 12V)
tor Connector (DC 12V)
The camera needs a DC 12V 1A adapter for power supply.
6
66
6Fan
FanFan
Fan
The fan is implemented for controlling temperature and moisture of the internal
device. For its activation temperature, refer to the table below.
7
77
7eater
eatereater
eater
The heater is implemented for controlling temperature and moisture of the internal
device. The heater can be activated only when using DC 12V for the power source.
For its activation temperature, refer to the table below.
Bimetal
Bimetal Bimetal
Bimetal
for
forfor
for
Fan
FanFan
Fan
eater
eatereater
eater
On
45°C (±5°C)
5°C (±5°C)
Off
35°C (±5°C)
15°C (±5°C)
⑥
⑦
⑧
⑨
* Models herein and their
appearance are subject to change
without any prior notice.
⑩
⑪
9
www.rivatech.de
8
88
8Reset
Reset Reset
Reset button
buttonbutton
button
The reset button can be used for restarting the device or resetting it to Factory
Default. Refer to
6.3. Reset
and
6.4. Factory Default
for more details.
9
99
9Micro SD card slot
Micro SD card slotMicro SD card slot
Micro SD card slot
It is a memory card slot for external storage.
10
1010
10 Status LEDs
Status LEDsStatus LEDs
Status LEDs
The LEDs indicate system status. It works the same way as of the LEDs on the LAN
connector.
For the factory default setting, LED 2 blinks for the heartbeat and LED 1 turns on for
video signal. To change its setting, refer to the section
4.5.11. LED Setting
4.5.11. LED Setting4.5.11. LED Setting
4.5.11. LED Setting
of the
NVC Web Page User’s Manual.
NVC Web Page User’s Manual.NVC Web Page User’s Manual.
NVC Web Page User’s Manual.
11
1111
11 Video Out connector
Video Out connectorVideo Out connector
Video Out connector
Connect the 2-pin to BNC cable to the video out connector to use a displayer such as
a VCR or monitor.
LED
1
LED
2
10
www.rivatech.de
4
44
4.
..
.INSTALLATION
INSTALLATIONINSTALLATION
INSTALLATION
When assembling the main body of the camera and its
dome
cover, make sure they fit each other into place.
Note
i
1)
1)1)
1)
Place the installation template
that is provided in the package on
the desired position of installation.
2)
2)2)
2)
Attach the waterproof silicon
band on the bottom plate of the
device.
3)
3)3)
3)
Drill three holes on the
template and insert anchor blocks
into the holes. Fasten the camera
with screws.
4)
4)4)
4)
Make sure the cables are
properly connected by checking
the LED button. For the detailed
information, please refer to
3.1.
Internal View
.
5
55
5)
))
)
Adjust the lens position by
referring to
4.2. Setting the Lens
Position
.
6)
6)6)
6)
Put the dome cover on the
main body of the camera. Make
sure the main body and the cover
fit each other into place.
Indice
Altri manuali RIVATECH Telecamera di sicurezza
