10 GB
2. Layout (Fig. 1)
1. Battery
2. Contacts
3. Battery release button
3. Scope of delivery
•Open the packaging and remove the device care-
fully.
•Remove the packaging material as well as the
packaging and transport bracing (if available).
•Check that the delivery is complete.
•Check the device and accessory parts for trans-
port damage.
•If possible, store the packaging until the warranty
period has expired.
ATTENTION
The device and packaging materials are not toys!
Children must not be allowed to play with plas-
tic bags, lm and small parts! There is a risk of
swallowing and suffocation!
4. Safety notices for Li-Ion batteries
WARNING! Read all safety directions and instruc-
tions. Omissions in the compliance with safety direc-
tions and instructions can cause electrical shock, re
and/or severe injuries. Retain all safety directions
and instructions for future use.
•Do not open the battery. Risk of short-circuiting!
•Protect the battery from heat, e.g. from con-
stant sun exposure, and from re, water and
humidity. Risk of explosion.
•When the battery has been damaged or it is
being used inappropriately, fumes can be re-
leased. Let fresh air in and consult a doctor if the
fumes cause you any problems. The fumes can
irritate the respiratory tract.
•If used incorrectly, liquid may leak from the
battery. Avoid contact with this. In the event of
accidental contact, rinse off with water. If the
liquid gets into eyes, seek medical assistance.
Leaking battery uid may cause skin irritations or
burns
•Only use original batteries with the voltage
specied on the rating plate of your power
tool. If other batteries are used, e.g. imitations,
reconditioned batteries or products from third party
manufacturers, there is a risk of personal injury
as well as property damage based on exploding
batteries.
•The battery voltage must correspond with the
battery charging voltage of the charger. Oth-
erwise, there is a risk of re and explosion.
•Charge the batteries only in chargers that have
been recommended by the manufacturer. There
is a risk of re if a charger for a particular type of
battery is used for another type of battery.
1. Introduction
MANUFACTURER:
GARLAND distributor, s.r.o.
Hradecká 1136, 506 01 Jičín
Czech Republic
DEAR CUSTOMER,
We hope your new tool brings you much
enjoyment and success.
NOTE:
According to the applicable product liability laws, the
manufacturer of the device does not assume liability
for damages to the product or damages caused
by the product that occurs due to:
•Improper handling,
•Non-compliance of the operating instructions,
•Repairs by third parties, not by authorized service
technicians,
•Installation and replacement of non-original spare
parts,
•Application other than specied,
•A breakdown of the electrical system that occurs
due to the non-compliance of the electric regu-
lations and VDE regulations 0100, DIN 57113 /
VDE0113.
We recommend:
Read through the complete text in the operating in-
structions before installing and commissioning the
device. The operating instructions are intended to
help the user to become familiar with the machine
and take advantage of its application possibilities in
accordance with the recommendations. The operat-
ing instructions contain important information on how
to operate the machine safely, professionally and
economically, how to avoid danger, costly repairs, re-
duce downtimes and how to increase reliability and
service life of the machine.
In addition to the safety regulations in the operating
instructions, you have to meet the applicable regula-
tions that apply for the operation of the machine in
your country. Keep the operating instructions pack-
age with the machine at all times and store it in a
plastic cover to protect it from dirt and moisture.
Read the instruction manual each time before op-
erating the machine and carefully follow its informa-
tion. The machine can only be operated by persons
who were instructed concerning the operation of the
machine and who are informed about the associated
dangers. The minimum age requirement must be
complied with.
