Introduction • 1
Introduction
Using an advanced detection system consisting of up to six gas sensors,
the GX-6000 Personal Gas Monitors detects the presence of combustible
gases, oxygen (O2), carbon monoxide (CO), and hydrogen sulfide (H2S)
and various other toxic gases simultaneously. The compact size and easy-
to-use design make them ideally suited for a wide range of applications as
described in the GX-6000 Operator’s Manual. Please read the GX-6000
Operator’s Manual first before using the GX-6000 Data Logger
Management Program.
The GX-6000 Data Logger Management Program downloads stored data
in the GX-6000 to a Windows-based PC. After the data has been
downloaded, you can view, save, or print it using your computer and the
GX-6000 Data Logger Management Program.
The purpose of this manual is to explain how to use and set up the
GX-6000 Data Logger Management Program. You will learn how to:
• install and launch the software
• install the downloading cable (if needed)
• access and store data in a common database
• download data from the GX-6000
• view, print, and save data
• change data logging parameters
• create user and station IDs
• change the appearance of the program screens
• change the color of graphed readings for a particular gas
Before you get started, be sure to review the system requirements in the
next section.
CAUTION: The GX-6000 unit detects oxygen deficiency and elevated
levels of oxygen, combustible gases, carbon monoxide, and
hydrogen sulfide, all of which can be dangerous or life
threatening. When using the GX-6000, you must follow the
instructions and warnings in the GX-6000 Operator’s
Manual to assure proper and safe operation of the unit and
to minimize the risk of personal injury.
CAUTION: The operator of this instrument is advised that if the
equipment is used in a manner not specified in this manual,
the protection provided by the equipment may be impaired.
