RoadRunner D4+ 4.0 Manuale utente


1
RoadRunner D4+ 4.0 Electric Scooter
For instructional videos on how to: get your scooter ready to ride, maintain your
scooter, and repair your scooter, scan this QR code with your camera phone and
browse dozens of videos.

2
Table of Contents
Scooter and Accessories
D4+ 4.0 Electric Scooter
Accessories
Scooter Specs
Charging the Scooter
Battery and Charger Information
Handlebar Controls and Instruments
Parameter Settings (P-Settings)
Operating instructions
Safety Instructions
Maintenance
Adjusting the Stem Height
Troubleshooting common errors
Folding the Scooter
Unfolding the Scooter
Installing Steering Damper
How to Carry Your Scooter
Warranty Policy
3
3
3
4
5
6
7
9
10
11
12
12
13
14
15
16
22
22

3
Scooter and Accessories
D4+ 4.0 Electric Scooter
Accessories Included:
1. Owner’s Manual
2. Steering Damper
3. Charger
4. Multi-tool

4
Scooter Specs
Product name
RoadRunner D4+ 4.0 Electric Scooter
Product model
D4+ 4.0
Folded Dimensions
49" (l) x 9" (w) x 21" (h)
Unfolded Dimensions
49" (l) x 9" (w) x 50" (h)
Net weight
70 lbs
Max load
330 lbs
Max speed
40 MPH (depending on environment, incline, weight
and driving habits)
Range:
40 miles (depending on environment, incline, weight
and driving habits)
Max climb
28° incline
Suspension
C-Type with Front & Rear Spring Shock
Absorbers
Tire
10" Pneumatic Hybrid Air Tires
IP Rating
IP53
Brake system
Front and Rear EBS Hydraulic Disc Brake
System
Light system
LED Headlight; LED Taillight and LED Brake light
Lithium battery
52V 23.4Ah Lithium-Ion
Charging time
2A battery charger 9-10 hours, (2) 2A chargers 4-5
hours

5
Charging the Scooter
1. Plug the charger into a power supply (wall outlet, power strip, etc.)
2. Open the waterproof cover on the charging port, then plug the charger into
the charging port.
3. A red light means the scooter is charging; green means it is fully charged.
4. Cover the charging port once the charger is removed.
Note: If the scooter is known to not be fully charged when plugging charger in,
and the light turns green, the charger is likely faulty.
Please contact service at suppot@roadrunnerscooters.com

6
Battery and Charger Information
Every RoadRunner D4+ 4.0 Scooter is equipped with a dedicated lithium-ion
battery and a dedicated smart charger. Please do not use any other charger
or battery with your scooter, and do not use your dedicated charger with any
other product. We are not responsible for any damage incurred due to misuse
of your charger.
1. Battery: The lithium-ion battery provided by RoadRunner Scooters can be
charged up to 600 times with no change in capacity.
•Over 600 uses, the battery’s capacity will drop to 80%.
•Over 1000 uses, the battery may need replacing if it doesn’t hold a full
charge.
Maximum Voltage for full battery charge: 58.8 V
Minimum Voltage before battery dies: 42.0 V
WARNING: NEVER LEAVE THE SCOOTER UNATTENDED WHILE
BATTERY IS CHARGING!
2. Charger: The smart charger included with your D4+ 4.0 scooter
automatically stops charging and the light turns green when your scooter
reaches 100%, which means it is fully charged. The battery should be fully
charged in 9-10 hours with a single charger (4-5 hours with 2 chargers). If
your battery will not charge, please contact RoadRunner Scooters for help.
If your battery is damaged due to water, storing in extreme temperatures,
or human mishandling, it is not covered under the new scooter or extended
warranty.

7
Handlebar Controls and Instruments

8
LCD Display
Power: power button (hold down for 3 seconds)
Gear: current gear speed: Gear 1 (low), Gear 2 (medium), Gear 3 (fastest)
To switch to different modes, hit the mode button to get to Gear 2, hit the mode
button again to get to Gear 3, and once more to return to Gear 1.
Speed: Current Speed
Battery Voltage: Current Battery level
Riding Time: Remaining Riding time left on battery.
Mode: Switches to each Parameter Setting (P-setting).
Accelerator: Powers the scooter acceleration.

9
Parameter Settings (P-Settings)
To make changes to any P-settings, press the power and mode buttons
simultaneously until the P-settings appear. Once the selected settings appear,
quickly press the power button once to proceed to the next P-setting. Press the
power button to exit the current P-settings or to advance to the next P-setting. P-
settings will automatically exit if there is no activity for 8 seconds.
Example: to modify KM vs. miles, press the power and mode buttons
simultaneously until the P-settings appear to enter P1. Once the selection
flashes, press the power button once to select 0 (KM) and once more to select 1
(miles). Once you’ve made your selection, press the power button to proceed to
the P2 setting.
P01
Headlight Brightness 1-3 3= brightest default is 3
P02
Range units: 0= Km, 1 = mile Default is Km
P03
Voltage: 24V,36V, 48V, 52V Default is 52V
P04
Automatic Display Shutoff Default is 5 minutes
P06
Wheel Diameter: 10.0 inches Do not change
P07
Magnetic Poles in hum motor: 30. Do not change
P08
Max output (max speed): 1 – 100% (example: 80 = 80% top
speed.
P09
0 = non-kickstart; 1 = kickstart. With kickstart setting on, the
scooter must be moving at 2mph for it to accelerate
P11
EBS Brake Settings: 0= EBS off 1= weakest EBS 5 = strongest
EBS (most sensitive). Default: 3
P12
Start Settings: 1 – 5; 1 = slow start 5 = fastest start
P15
Voltage cut off. When voltage drops below 42V, the scooter will
power off automatically to protect the lithium-ion battery.
Do not change
P17
Cruise control: 0= Non-Cruise 1 = Cruise
P20
Default = 4 Do not change
Indice
Altri manuali RoadRunner Scooter


















