ROBAND GT400 Manuale utente

24/10/2017

Manufactured By

ROBAND AUSTRALIA PTY LTD

OPERATING INSTRUCTIONS

GRIDDLE / GRIDDLE TOASTER

Models:

G400, GT400, GT480

Version 1

G500, G500XP, GT500

Version 1

G700, GT700

Version 2

Includes

International models:

…-Bxx, …-Fxx, …-Gxx, …-Mxx

Special Features:

Single or Dual Thermostat Control

Stainless Steel Construction

Integrated grease Box and front drain gutter

Multiple toasting Rack positions (only on Griddle Toaster version)

Dedicated Toasting element (only on Griddle Toaster version)

These instructions cover the models of ROBAND®Griddle & Griddle Toasters only. Although there

are slight variances between models, the installation, operation, care and maintenance procedure

is the same for all.

CONTENTS

INTRODUCTION.....................................................................................................1

GENERAL PRECAUTIONS.....................................................................................1

PACKAGING ...........................................................................................................2

COMPLIANCE.........................................................................................................2

INSTALLATION.......................................................................................................3

OPERATION............................................................................................................5

SAFETY ......................................................................................................8

GENERAL SAFETY.................................................................................................8

CLEANING, CARE & MAINTENANCE ....................................................................9

TROUBLESHOOTING...........................................................................................10

SPECIFICATIONS.................................................................................................11

CIRCUIT DIAGRAM –GT480................................................................................12

CIRCUIT DIAGRAM –GT400 / GT500..................................................................12

CIRCUIT DIAGRAM –GT700................................................................................13

CIRCUIT DIAGRAM –G400 / G500 / G500XP......................................................13

CIRCUIT DIAGRAM –G700..................................................................................14

GT400 EXPLODED VIEW .....................................................................................15

GT480 EXPLODED VIEW .....................................................................................16

GT500 EXPLODED VIEW .....................................................................................17

GT700 EXPLODED VIEW .....................................................................................18

G400 EXPLODED VIEW .......................................................................................19

G500 / G500XP EXPLODED VIEW.......................................................................20

G700 EXPLODED VIEW .......................................................................................21

APPENDIX A.........................................................................................................22

EC DECLARATION OF CONFORMITY.................................................................23

WARRANTY..........................................................................................................24

INTRODUCTION

Congratulations on your purchase of this quality ROBAND®product. With proper

care and management your new purchase will give you years of trouble free

service.

By reading these instructions carefully you can ensure that this machine is used

and maintained properly, helping your new investment to perform well for you now,

and to continue performing in the many years to come.

GENERAL PRECAUTIONS

This machine must only be operated by qualified person(s) who are fully versed in the

operating and safety instructions described in this manual. Operators should be

instructed to familiarise themselves with any and all safety instructions described in

this manual prior to commencement of any maintenance or service.

These machines are heating units, and as with any commercial heating unit the

surfaces on these Griddle’s will get hot. Always be careful when near an

operating Griddle, and ensure that any risk to unwary customers or staff is

minimised with additional signage if necessary. Due to the obvious heat hazard

Roband recommends that these units be kept out of reach of children.

In the case of new personnel, training is to be provided in advance. These machines

should not be operated by persons (including children) with reduced physical, sensory

or mental capabilities, or lack of experience or knowledge, unless they are being

supervised or being instructed concerning the safe use of the appliance by a person

responsible for their safety.

The machine should be disconnected from all power and allowed to cool before

cleaning. Any damaged plug or cord should be replaced before further use.

These machines should not be cleaned with the use of a spray applicator, water jet or

any other method except those outlined in the Cleaning & Care section of these

instructions. No part of the machine should be immersed during cleaning.

Roband will accept no liability if;

Non-authorised personnel have tampered with the machine.

The instructions in this manual have not been followed correctly.

Non-original spare parts are used.

The machine is not cleaned correctly, with the right product.

There is any damage to the unit.

PACKAGING

All care is taken when packing and Roband ensures that every unit is functional and

undamaged at the time of packaging.

The Package of this Griddle should include:

1) One Griddle Or Griddle Toaster (appropriate model)

2) This manual

3) Grease Box

4) Toasting Rack (Toaster Version only)

5) Crumb Tray (Toaster Version only)

Any damage to the machine as a result of freight must be reported to the Freight

Company and to the agent responsible for the dispatch of said unit within 24 hours of

receipt. No claims will be accepted or entertained after this period.

RCM:

Roband®products have been designed and manufactured to comply with any and

all specifications set out by the Australian Communications and Media Authority

(ACMA) in regards to Electromagnetic Compatibility. As testament to such

compliance these units bear the RCM symbol.

For further information contact the Australian Communications Authority, PO Box

13112, Law Courts, Melbourne VIC 8010.

CE:

Roband®products bearing the CE compliance mark have been designed and

manufactured to comply with European Standards and Directives. A copy of the

CE Declaration of Conformity is located at the back of these instructions.

COMPLIANCE

INSTALLATION

Remove all the packaging materials and tape, as well as any protective plastic from

the machine. Clean off any glue residue left over from the protective plastic using

methylated spirit.

Place the Griddle / Griddle Toaster on a firm, level surface in the required position.

Before connecting the Griddle to the power supply ensure that all the controls are in

the “OFF” position. Turn all controls on and off to familiarise yourself with their

operation

National Standards exist outlining the positioning, spacing and ventilation

requirements when installing new appliances. These Standards should be

consulted and new equipment should be installed accordingly. In any situation

where specifications allow a distance of less than 100mm we would still

recommend that a well-ventilated air gap of not less than 100mm be maintained.

Caution: If clearances of 100mm are not maintained around the appliance, walls

partitions and finishes etc., must be made of a non-combustible material. Any

combustible material must be clad in suitable non combustible material. Fire

prevention regulations must be adhered to

Do not place the Griddle above other equipment that may give off heat.

POWER CONNECTION

G400, G500, G500XP, GT400, GT480 & GT500

Plug the machine into a power outlet matching the plug type supplied.

G700 & GT700

NOTE: GT700 and G700 models MUST be installed by a licenced electrician

in accordance with Australian wiring Standards.

Suitable means for disconnection from power supply must be incorporated in

the fixed wiring in accordance with the wiring rules.

Wiring to machine must be protected by suitable high temperature sleeving

and inlet bushes.

Ensure all panels and components are re-fitted to machine before use.

The GT700 is supplied ready for connection in a configuration of 3 Phase and

Neutral Mains Supply, minimum 10A per Phase.

If a single Phase 32A supply is to be used, connect the phase to L1 and a

bridge must be inserted between L1 and L2, and L2 and L3 on the Terminal

Block.

If a 2-Phase minimum 20A per Phase supply is to be used, connect one

phase each to L1 and L2 and a bridge must be inserted between L2 and L3

on the Terminal Block.

INSTALLATION CONTINUED…

The G700 is supplied ready for connection in a configuration of 2 Phase and

Neutral Mains Supply, minimum 10A per Phase.

If a single Phase 20A supply is to be used, connect the phase to L1 and a

bridge must be inserted between L1 and L2 on the Terminal Block.

We recommend the use of an RCD (Residual Current Device) rated at not less

than 30mA for circuit protection when using these units. Note that if one RCD is

used to protect multiple socket outlets, the RCD shall be appropriately rated so as

to allow up to 30mA from these machines alone.

OPERATION

INITIAL STARTUP

To turn on the unit, turn the Power switch to the right (see below).

CONTROLS DESCRIPTION

Power

Switch

The Power switch disconnects the mains power supply from the

machine. The green pilot light above and to the left of the switch

will illuminate whenever the unit is switched on, indicating that

power is being supplied to the unit.

Turning the switch to “ON” performs the following:

- GT480 Turns Toasting Elements on, activates hotplate

thermostat dial. NOTE: The hotplate element is not yet

activated until a control setting other than “OFF” is selected.

- G500, G500XP, GT500, GT700 All control dials are activated

including thermostat(‘s) (for cooking plate) and Energy

Regulator (for Toasting Element on Grill Toaster models).

NOTE: The cooking elements and/or toasting elements are

not yet activated.

Thermostat

The Thermostat controls the temperature of the cooking plate. The

thermostat will cycle on and off to maintain the pre-set

temperature. The temperature can be selected by using the dial

indicator. Most cooking is carried out between 180°C and 240°C.

When the thermostat is heating up, the amber pilot light closest to

the control will be illuminated. When the set temperature has been

reached, the pilot light will turn off.

Energy

Regulator

The Energy Regulator controls the toasting element. (GT500 and

GT700 Versions Only). Most efficient toasting is achieved when the

toasting elements are on maximum. Max setting “HI” will run the

toasting element continuously. An Idle setting of “2” can be used to

keep the elements warm while not in use. This allows for faster

heat up time when the toasting elements are required. When the

Energy Regulator is heating up, the amber pilot light closest to the

control will be illuminated. When the control is not heating, the pilot

light will turn off.

Power Thermostat Energy Regulator

SEASONING

All Models:

Before cooking for the first time the plates need to be seasoned as follows.

Remove the paper from the plate and wipe off excess fat.

Brush the plate liberally with frying oil and cover the surface with a layer of salt.

Set the thermostat to a temperature of around 180and heat for around 25

minutes.

Allow the oil and salt to cool, then remove it carefully without scratching the

surface.

Brush the plate with oil again and re-heat until the oil is burnt in. This will form a

skin on the surface of the plate.

Re-oil the surface once again.

Your Hot Plate is now ready for use.

OPERATION

Lightly grease or oil the plates and set the Thermostat to the desired cooking

temperature. Turn the Power switch ON. This will Illuminate the Green Pilot

Light

The Griddle Plate is thermostatically controlled. Rotate thermostat knob to select

the desired cooking temperature.

Allow a warm up time of around 20 minutes to pre-heat the plates before using

for the first time each day.

Select Desired Toasting rack position suitable for size of food to be toasted (If

applicable –Only available on GT400, GT480, GT500 & GT700 models).

Select desired toasting setting on Energy Regulator (If applicable –Only

available on GT400, GT500 & GT700 models).

GT480

The GT480 has the advantage of an additional toasting element and multi-level

toasting rack underneath the cooking plate. The toasting element is always on

when the Power Switch is on.

GT400 / GT500

The GT400 & GT500 have the advantage of an additional toasting element and

multi-level toasting rack underneath the cooking plate. The toasting element is

controlled by the Energy Regulator.

GT700

The GT700 is equipped with separate elements and controls for Left hand Side and

Right Hand Side Operation. Each Half is controlled by its own thermostat or energy

regulator. This means that each side and each function can be used simultaneously

or individually as required and different temperature settings can be set for each

side.

The GT700 has the advantage of dedicated cooking elements and dedicated

toasting elements as well as multi-level toasting rack underneath the cooking plate.

The toasting elements are controlled by Energy Regulators while the cooking

elements are controlled by Thermostats.

G400 / G500 / G500XP

The G400 & G500 features a hotplate which is temperature controlled by a

thermostat. The G500XP also offers the advantage of increased element power for

additional performance.

G700

The G700 is equipped with separate elements and controls for Left hand Side and

Right Hand Side Operation. Each Half is controlled by its own thermostat. This

means that they can be used simultaneously or individually as required and

different temperature settings can be set for each side.

NOTE: Toasting on GT models is intended to be done simultaneously with the

cooking plate. It is possible to use the toasting feature without the cooking plate,

however the performance will not be as efficient as the toasting relies on heat

generated by the cooking elements. If the primary purpose of the machine is

Toasting, then a separate toasting machine would be recommended.

GREASE BOX:

The Griddles and Griddle Toasters have integrated grease-box’s’. These can be

removed by tilting the grease box forward to release the catch while simultaneously

sliding forward.

CAUTION

Grease Box Contents should be checked at least once a day to ensure that

contents is not full.

Take care when removing grease box as the handle and contents may be

hot. We recommend emptying the grease box when the machine is cool.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali ROBAND Piastra

ROBAND

ROBAND G400 Manuale utente

Manuali Piastra popolari di altre marche

Proctor-Silex

Proctor-Silex 25340 Manuale utente

New House Kitchen

New House Kitchen NH33-C Manuale utente

Magikitch'n

Magikitch'n 24 Manuale utente

Black Stone

Black Stone 1650 Manuale utente

Anvil

Anvil FTA7116 Manuale utente

Presto

Presto 07030 Manuale utente

Pit Boss

Pit Boss PB2BGT1 Manuale

Dyna-Glo

Dyna-Glo DGL260SNP Manuale utente

Char-Broil

Char-Broil 19952085 Manuale utente

APW Wyott

APW Wyott HMG-2424 Manuale utente

Pit Boss

Pit Boss Ultimate Griddle PB2BGD2 Manuale utente

Airxcel

Airxcel Suburban Elite SOP-1005A Manuale utente

Keating Of Chicago

Keating Of Chicago MIRACLEAN PRE-2000 Manuale utente

Nexgrill

Nexgrill 720-0786A Manuale utente

Outwell

Outwell FH-3047C Manuale utente

Rankam

Rankam Member's Mark GR2298901-MM-02 Guida di riferimento rapido

Black Stone

Black Stone 1972 Manuale utente

Star

Star Ultra Max 760TA Manuale utente