Operating instructions
SZD-54
No.
3014
Thank you for purchasing the ROBBE "SZD-54". The model is a modern
moulded foam model, largely assembled, with a wide range of applications.
In order to ensure that you will enjoy the model for a long time and especially to ensure a
smooth first flight, please read this manual carefully and follow the steps exactly as they
are done.
•Pay particular attention to all safety instructions for operation of the model in order not to endanger
yourself or others!
•Due to the advancing technical developments, changes in the sen se of technical progress are
subject to change without notice.
•The construction of the model does not require extensive tooling and should also be easy for less
experienced model builders.
•Nevertheless, it is not a beginner model!
•If you are unsure, please contact one of our dealers or ask for our service. Many model flying clubs
also offer assistance.
•After purchasing the model, check the contents for completeness and damage.
•Always proceed with appropriate responsibility when operating the model to avoid causing personal
injury or property damage!
•Pay attention to valid insurance coverage!
•Fly only within the scope of the legal regulations and on permitted places!
•After finishing the flight, always remove the battery from the model!
•High heat (for example in a locked car) or extreme cold can damage the model and its components!
•Packaging or parts of packaging may endanger children! Store them immediately in a safe place.
•The use of model making articles requires knowledge and practice. Only put the model into
operation if you are sufficiently trained!
Warranty conditions:
The warranty covers 24 months from the date of purchase, material or functional defects. However, not
damage due to improper use, wear and tear, overloading or similar! Except for warranties within the
framework of statutory provisions.
No liability can be accepted for printing errors!
