Robe PATT 2017 Manuale utente

Version 1.5

Table of contents

1. Safety instructions ......................................................................................................... 3

2. Description of the xture .............................................................................................. 4

3. Installation....................................................................................................................... 5

3.1 Mounting the PATT 2017 ........................................................................................... 5

3.2 Connecting the PATT 2017 with the PATT Driver....................................................... 5

4. Technical specications ................................................................................................ 6

FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY

BEFORE INSTALLING THE PRODUCT .

1. Safety instructions

CAUTION!

The PATT 2017 was designed for indoor use only.

The product is for professional use only, it is not for household use.

This product has left our premises in absolutely perfect condition. In order to maintain this condition and to

ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions and warning

notes written in this manual.

The manufacturer will not accept liability for any resulting damages caused by the non-observance of this

manual or any unauthorized modication to the product.

If the device has been exposed to drastic temperature uctuation (e.g. after transportation), do not switch it on

immediately. The arising condensation water might damage your device. Leave the device switched o󰀨 until

it has reached room temperature.

The pixel PATT should be operated with the PATT Driver only.

The PATT 2017 becomes hot during its operation, a

llow it to cool prior

to manipulation.

The PATT 2017 unit never must be covered with cloth or other materials during

operation.

Refer servicing to qualied service personnel.

Warning! Risk Group 2 LED product according to EN 62471

LED light emission. Risk of eye injury. Do not look into the beam at short distance of

the of the product. Do not view the light output with optical instruments or any

device that may conncentrate the beam.

The light source contains blue LEDs.

When choosing the installation spot, please make sure that the PATT 2017 are not exposed to extreme heat,

moisture or dust.

Operate the PATT 2017 only after having familiarized with its functions. Do not permit operation by persons not

qualied for operating the PATT 2017. Most damages are the result of unprofessional operation!

Please use the original packaging if the PATT 2017 is to be transported.

Please consider that unauthorized modications on the xture are forbidden due to safety reasons!

2. Description of the xture

Pixel positions:

1 - Mounting yoke

2 - Parabolic aluminium reector

3 - Fan

4 - Control Input (4-pin XLR)

5 - Control box

6 - Tilt lock

3. Installation

The PATT 2017 must be installed by a qualied electrician in accordance with all

national and local electrical and construction codes and regulations.

3.1 Mounting the PATT 2017

The xture can be rigged to the truss or fastened to the oor stand via a mounting yoke. The hole of diameter

of 13 mm in the yoke serves for fastening a clamp (or a spigot) to the yoke.

Note: the spigot has to be inserted into the oor stand and always secured.

For overhead installation the PATT 2017 has to be always secured to the truss by means of a safety wire (that

can hold at least 10 times the weight of the xture) which is fastened to the truss and around mounting yoke

of the PATT 2017.

3.2 Connecting the PATT 2017 with the PATT Driver

1. Disconnect the PATT Driver from mains.

2. Connect the PATT 2017 to the PATT Driver by means of the 4-pin data cable.

3. Connect the PATT Driver to mains and make desired setting.

ALWAYS DISCONNECT THE PATT DRIVER FROM MAINS BEFORE CONNECTING/DISCONNECTING

THE PATT 2017.

Please see the user manual of the PATT Driver for more detailed information about its operation

For CE only: If you do not use the original Robe Data Cable 4-pin XLR for connection between PATT 2017 and

PATT Driver, the ferrite RRC 17-11-28-M-K5B (Robe P/N 13051799) should be installed on the 4-pin XLR cable

closely to the PATT 2017 as shown on the picture bellow.

If you use the original Robe 4-pin XLR cable, this ferrite is part of the cable and you do not need to install

another ferrite on the cable.

4. Technical specications

Input voltage: 48V

Max. power consumption: 210W

Compatible control driver: PATT Driver

Light source: 7x RGBW LED multichip

LED life expectancy: min. 20 000 hours

Typical lumen maintenance: 70% @ 20 000 hours

Optical System: parabolic aluminium reector with high reectivity coating

Control input: Locking 4-pin XLR (male)

Max. length of cable between

PATT Driver and PATT 2017: 10m

Mounting Points: Mounting horizontally or vertically via mounting yoke (360° tilt range)

Rigging: M12 mounting for clamp or spigot.

Operation position: any

Ingress protection: IP20 (for dry location only)

Weight: 10.3 kg

Max. surface temperature: 65°C (at 45°C ambient)

Maximum ambient temperature: 45 °C

Total heat dissipation (calculated):716 BTU

Min. distance from ammable surfaces: 0.2 m

Min. distance of illuminated objects: 0.2 m

Ferrite RRC 17-11-28-M-K5B

Dimensions (mm)

Wiring of control input:

Optional accessories

(P/N 10980374) Tripod for PATT 2013/2017, pixelPATT

(P/N 1098 0259) Floor Stand for PATT 2013, picklePATT

(P/N 1098 0260) Spigot for PATT 2013/2017/picklePATT, pixelPATT

(P/N 13052797) Data cable 4 pin XLR 10m, ferrite, EU

(P/N 13052798) Data cable 4 pin XLR 5m, ferrite, EU

(P/N 13052799) Data cable 4 pin XLR 10m, US

(P/N13052800) Data cable 4 pin XLR 5m, US

(P/N 17030386) Doughty Trigger Clamp

(P/N 99011963) Safety wire 35 kg

(P/N 13051799) Ferite RRC 17-11-28-M-K5B

(P/N 10055002) PATT Driver

1 - 0V

2 - Signal -

3- Signal +

4- +48V

Beam distribution

Specications are subject to change without notice.

April 19, 2018

Made in ROBE Lighting s.r.o., Palackého 416, 757 01 Valašské Meziříčí, Czech Republic

Indice

Altri manuali Robe Attrezzatura di illuminazione

Robe

Robe LightDome 575 Manuale utente

Robe

Robe ANOLiS Eminere Remote UV 2 Manuale utente

Robe

Robe Robin 300 plasma spot Manuale utente

Robe

Robe DigitalSpot 7100 DT Manuale utente

Robe

Robe DigitalSpot 7000 DT Manuale utente

Robe

Robe Anolis ArcSource Outdoor 24 MC Integral RGBW Manuale utente

Robe

Robe Led Blinder 196 LT Manuale utente

Robe

Robe Robin Esprite Manuale utente

Robe

Robe Stage Banner 10 AT Series Manuale utente

Robe

Robe Robin DLX SPOT Manuale utente

Robe

Robe Robin 100 LEDBeam Wireless DMX CRMX Manuale utente

Robe

Robe XT Series Manuale utente

Robe

Robe DMX Control 512 Manuale utente

Robe

Robe ClubWash 600 CT Manuale utente

Robe

Robe Scan 575 XT Manuale utente

Robe

Robe Color Mix 250 AT Series Manuale utente

Robe

Robe Color Sport 1200 Profile Manuale utente

Robe

Robe Anolis Ambiane XP56 Manuale utente

Robe

Robe ColorWash 575E AT Manuale utente

Robe

Robe Anolis Eminere Inground 2 Wireless DMX Manuale utente

Robe

Robe Robin BMFL FollowSpot Manuale utente

Robe

Robe RoboSpot Manuale utente

Robe

Robe Tarrnatula Manuale utente

Robe

Robe DigitalSpot 7000 DT Manuale utente

Manuali Attrezzatura di illuminazione popolari di altre marche

Brizo

Brizo 8SP-MU-4 Manuale utente

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Manuale utente

IKEA

IKEA BJÖRKSPIREA Manuale utente

Laserworld

Laserworld Evolution Series ES-400RGB Manuale utente

Alien

Alien RG STAR Manuale utente

EuroLite

EuroLite LED B-40 Manuale utente

Qazqa

Qazqa Suplux SL 3 Black 103062 Manuale utente

Commercial Electric

Commercial Electric 54568141 Manuale utente

CREE LIGHTING

CREE LIGHTING 304 Series Manuale utente

Goobay

Goobay 49867 Manuale utente

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Manuale utente

Alkalite

Alkalite Krypton KT-81 Manuale utente

Clas Ohlson

Clas Ohlson GU10 Manuale utente

DTS

DTS DELTA 10 F Manuale utente

ring

ring Solar Steplight Manuale utente

One Stop Gardens

One Stop Gardens 57696 Istruzioni per il montaggio

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Manuale utente

SIREM

SIREM Swimeo A2 Manuale utente