Robin FL-H7500 Manuale utente
Ⅰ.SPECIFICATIONS ・・・・・・・・・・・・・・・・・・
２
1.SPECIFICATIONS ・・・・・・・・・・・・・・・・・・・・２
2.PART NAMES ・・・・・・・・・・・・・・・・・・・・・・３
Ⅱ.PREPARATIONS ・・・・・・・・・・・・・・・・・・・・
４
Ⅲ.DISASSEMBLY AND REASSEMBLY PROCEDURE・・・ ５〜５２
1.EQUIPMENT DISASSEMBLY ・・・・・・・・・・・・ ５〜１５
2.EQUIPMENT REASSEMBLY ・・・・・・・・・・・・１６ 〜２７
3.ENGINE DISASSEMBLY・・・・・・・・・・・・・ ２８〜３６
4.ENGINE REASSEMBLY ・・・・・・・・・・・・・ ３７〜４７
5.CARBURETOR DISASSEMBLY AND REASSEMBLY・・・・ ４８〜４９
6.STARTER DISASSEMBLY AND REASSEMBLY ・・・・・ ５０〜５２
Ⅳ.MALFUNCTION AND REPAIRE ・・・・・・・・・・・・・ ５３〜５４
Ⅴ.CHECK AND RECONDITIONING ・・・・・・・・・・・・ ５５
Ⅵ.CRITERIA FOR RECONDITIONING ・・・・・・・・・・・ ５６〜５７
Ⅶ.NOTICE ・・・・・・・・・・・・・・・・・・・・・・・
５８
Ⅷ.CARE AND STORAGE・・・・・・・・・・・・・・・・・・
５９
Ⅸ.CHECK,DRAINAGE AND FEEDING OF ENGINE OIL・・・・ ６０
Ⅹ.VALVE CLEARANCE ADJUSTMENT・・・・・・・・・・・・ ６１〜６２
ⅩⅠ.AIR CLEANER CLEANING・・・・・・・・・・・・・・・・・・・・・
６３
1.PREPARATIONS・・・・・・・・・・・・・・・・・・・・・４
CONTENTS
2.NOTICE・・・・・・・・・・・・・・・・・・・・・・・・４
Ⅰ．SPECIFICATIONS
1.SPECIFICATIONS
Engine Blower
FL-H7500
mm 350×430×495（13.7×16.9×19.5in only for body）
kg 10.2（22.4lbs only for body）
EH075F
Air-Cooled,4-Stroke,Upright Single-Cylinder OHV Gasoline Engine
75.6
Automotive Unleaded Gasoline
1.9（64.2 fl.oz）
Automotive Oil SAE 10W-30;Class SF or higher
(Automotive 4-Stroke Engine Oil)
0.22（7.4 fl.oz）
Diaphragm Type
Breakerless Magneto
NGK CMR6A
Recoil Starter (with decompression)
Forced Lubrication
20.4（720 cfm）
14.1（498 cfm）
Joystick Lever（with rubber grip）
Trigger Lever,Cruise Control Lever
One Flexible Pipe,One Swivel Pipe,One Blower Pipe,One Blower Nozzle,
Two Shoulder Strap,Hose Bandφ100,Hose Bandφ76,
Tool（Box Wrench）,Instruction Manual
Type
Dimensions(LXWXH)
Dry Weight
Standard Accessories
Model
Type
Fuel
Engine Oil
Carburetor
Ignition System
Engine Speed Control Lever
SPECIFICATIONS
Spark Plug
Starting System
Lubrication
Handle
EngineOperating Part
Product Name
Performance
Air Volume with Nozzle m3/min
Capacity of Engine Oil L
Fuel Tank Capacity L
Piston Displacement mL
Max Air Volume m3/min
2
2.Part Name
DESIGNATION OF PARTS
1. Stop switch
2. Control Handle
3. Trigger Lever
4. Cruise Control Lever
5. Primer Pump
6. Cover Aircleaner
7. Knob Bolt
DESIGNATION OF PARTS DESIGNATION OF PARTS DESIGNATION OF PARTS
8. Choke Lever
9. Starter Handle
10. Fuel Tank
11. Fuel Tank Cap
12. Muffler
13. Shoulder Strap
14. Air Inlet Net
15. Plug Cover 22. Blower Pipe
16. Spark Plug 23. Blower Nozzle L=450
17. Oil Cap 24. Hose Band φ100
18. Oil Drain Bolt 25. Hose Band φ76
21. Swivel Pipe
19. Elbow 26. Blower Nozzle L=200
20. Flexible Pipe
OPTION
3
Ⅱ．PREPARATIONS
1.PREPARATIONS
(1)Workbench
(2)Tool for disassembly and reassembly
(3)Wash-pan
(4)Wash oil (light oil,gasoline,etc)
(5)Automotive 4-stroke engine oil,grease
(6)Liquid packing
(7)File,sand paper
(8)Waste
2.NOTICE
(1) Use the standard tools properly.
(2) While disassembling the engine blower,memorize the locations of individual parts
so that they can be reassembled correctly.
Attach a tag to a part you are uncertain about its mounting position.
(3) Use boxes for keping disassembled parts in a group.
(4) To prevent any loss and wrong reassembly of screw bolts and nuts,try to assemble
each group of disassemble parts temporarily.
(5) Handle disassembled parts carefully,and clean them with wash oil.
(6) After removing gaskets,remove extraneous material clearly from the gasket placed palaces.
(7) Use an impact driver for a screw bolt and screw,etc.that are difficult to be unfastened.
(8) Use new gaskets when reassembling.
(9) After reassembling each of the rotatable main parts, rotate by hand to test it for
bad movements and abnormal noises.
(10)After the completion of reassembly, rotate the rotatable main parts by hand to test
them for defects and looseness.
3.SPECIAL TOOL FOR DISASSEMBLY
Part number：５９７９００１０００
Tool name ：ＴＯＯＬ
Work：Flywheel Puller
4
Ⅲ．DISASSEMBLY AND REASSEMBLY PROCEDURE
1.EQUIPMENT DISASSEMBLY
For further disassembling instructions on each part, see the corresponding pages.
step
Part of remove
Procedure
Fastener
PCS
Notice
Special tool
1)Unscrew the DRAIN,BOLT
(5−1) and CAP,OIL(5−2) M8×12 1
2)Drain the ENGINE OIL.
3)Screw the DRAIN BOLT and
CAP,OIL.
2Fuel 1)Drain the fuel.
1)Remove the COVER,AIR
CLEANER.
KNOB BOLT M5
1
2)Remove the AIR CLEANER
ELEMENT. Keep contaminant or dust off the AIR
CLEANER ELEMENT.
3)Remove the DUCT,AIR
CLEANER.
HOSE CLAMP
1)Remove the GUARD,OIL.
2)Remove the STARTER. M5×20mm 3
3)Remove the COVER,ENGINE 5X16mm 4
1)Remove the fuel tube. The fuel will spout if the fuel tube is
removed with the fuel tank filled with
fuel.
2)Remove the TANK,FUEL. M6X12mm 2
1)Remove the WIRE.
2)Remove the CONTOROL CABLE. 4X16mm 5
M5×25mm 1
2)Remove the THROTTLE LEVER
2 from the LEVER 2 ASSY. M6×14mm 1
7CASE,AIR CLEANER
P11
1)Remove the CASE,AIR CLEANER.
M5×16mm 4
1)Remove the
PLATE,SEPARETOR.
Be sure to pull the PLATE,SWPARATOR
by its body.
2)Remove the PLATE,CHECK
VALVE(with CHECK VALVE).
3)Remove the CHECK VALVE(1). Do not let the CHECK VALVE(1) missing.
1)Remove the SCREW
the DAMPER 1 side. M5×40mm 1
2)Remove the FRANGE NUT the
DAMPER 2 side. M5 2
5X16mm 9
M5×65mm 2
M5 2
2)Remove the ELBOW.
3)Remove the DAMPER 2.
10 IMPELLER P13 1)Remove the IMPELLER. M6X45mm 4
11 ENGINE P13 2)Remove the ENGINE. M6X30mm 6
6LEVER(WIRE&CABLE)
P11
4COVER,ENGINE
P10
5TANK,FUEL
P10
Keep contamination or dust off the
DRAIN BOLT and CAP,OIL.
3COVER,AIR CLEANER
P9
1ENGINE OIL
For further instructions
on the engine oil draining,
see page 60.
1)Remove the LEVER 1 and
LEVER 2 ASSY.
6-1 LEVER
P14
1)Remove the CASE 1,VOLUTE.
8FRAME
P12
9CASE 1,VOLUTE
P12
BLEAHER(AIR
CLEANER)
P11
7-1
5-1 5-2
5
9
NO. Part name Disassembling Instructions
3COVER,AIR CLEANER
KNOB BOLT
ELEMENT
DUCT
HOSE CLAMP
(1) Remove the COVER,AIR CLEANER by looseninig KNOB BOLTS.
(2) Remove the DUCT by looseninig HODE CLAMPS.
KNOB BOLT
COVER,AIR
CLEANER
ELEMENT
DUCT
HOSE CLAMP
HOSE CLAMP
Indice
Altri manuali Robin Soffiatore
