Robin Compact SIP Manuale utente
Manual
Robin Compact SIP
Software version 3 or higher
Version: 3.0.1 ENG
Date: 27-01-2014
gf1
1
Manual Robin Compact SIP ENG - v. 3.0.1
gf2
2
Manual Robin Compact SIP ENG - v. 3.0.1
About this manual
This manual describes mounting, installation and programming of the Robin Compact SIP unit
in combination with software version 3.0.1. You can update the software of the Robin SIP to the
latest version. For instructions on updating see page 43 of this manual.
This manual applies to Robin Compact SIP devices with part no.: C01060 - C01067, serial no.
1204-xxxx and higher.
If you have any questions after reading this manual, please contact us
at:
website: www.robin.nl
support website: support.robin.nl
e-mail: [email protected]
phone: + 31 72 534 64 26
Robin Telecom Development
The installed base for the Robin Compact entrance door unit exceeds 10,000 systems. The new
Robin SIP is one of the first entrance door units to feature SIP protocol integration in a single unit.
Consequently, this entrance door unit is not only robust and proven, the use of the ‘end-to-end’
protocol means that it also offers all the advantages of an IP environment, such as integration and
management.
We are aware that the latest IP technology offers many possibilities.
As a result, we continually strive to modernise our IP products based on feedback we receive from
our customers.
gf3
3
Manual Robin Compact SIP ENG - v. 3.0.1
Contents
1 Introduction 5
1.1 Robin SIP Door Intercom 5
2 Operation 7
2.1 Operating the door phone 7
2.2 Answering 7
2.3 Controlling the built-in door opener 7
3 Installation 8
3.1 Package contents 8
3.2 Installation dimensions 8
3.3 Tools and materials required for mounting 11
3.4 Mounting instructions 11
3.5 Connecting the Robin SIP 12
4 System installation 13
4.1 Requirements prior to installation 13
4.2 Connecting the Robin SIP to a network 13
5 Configuration 15
5.1 Logging in to the Robin SIP 15
5.2 Configuration of the Robin SIP 17
5.2.1 Telephony 18
5.2.1.1 Telephony / SIP 18
5.2.1.2 Telephony / Phonebook 20
5.2.1.3 Telephony / Call settings 23
5.2.1.4 Telephony / Call log 25
5.2.2 Audio 27
5.2.2.1 Audio / Settings 27
5.2.2.2 Audio / Detection 28
5.2.3 Network 29
5.2.3.1 Network / Status 29
5.2.3.2 Network / Settings 30
5.2.3.3 Network / HTTP 32
5.2.3.4 Network / Mail 33
5.2.3.5 Network / NAT 35
gf4
4
Manual Robin Compact SIP ENG - v. 3.0.1
5.2.4 System 36
5.2.4.1 System / Device 36
5.2.4.2 System / Clock 38
5.2.4.3 System / Events 39
5.2.4.4 System / Security 41
5.2.5.5 System / Schedules 42
5.2.4.6 System / Software 43
5.2.4.7 System / Switch 45
5.2.4.8 System / Info 47
5.2.4.9 System / Debug 48
5.2.4.9 System / Logs 50
6 Support 51
Appendix A, List of key words 52
Appendix B, Electronic lock 55
gf5
5
Manual Robin Compact SIP ENG - v. 3.0.1
1 Introduction
1.1 Robin SIP Door Intercom
Integrated functions
The Robin SIP door intercom offers the following fully integrated functions in one single device:
Telephone device with a piezo push-button
Door opener
Easy to operate and configure
Remote controllable and configurable through HTTP-commands
Advanced event mechanism
Easy to install
The Robin SIP is easy to install.
A single module is all that has to be mounted; there are no individual loose boxes.
Simple operation
The Robin SIP is equipped with one, two, four or six piezo push-buttons for dialling device
numbers. The door opener relay is activated via the device to which the call is directed.
SIP communication
The Robin SV uses the Session Initiation Protocol (SIP). This means that the entrance door unit
can be connected to any business telephone exchange (PBX) or VoIP devices that supports the SIP
protocol. To check compatibility please see the compatibility chart on the supplied USB drive or on
our support website: http://support.robin.nl.
Door opener
The potential free relay switch in the Robin SIP is activated by typing in a key combination at the
dialled device.
The device number and key combination can be specified in the software application for the Robin
SIP.
The relay can be used to open a door, a gate or a barrier.
gf6
6
Manual Robin Compact SIP ENG - v. 3.0.1
High-quality sound reproduction
The integrated concept means that there are no ‘converters’ which distort sound quality.
Consequently, the Robin SIP offers exceptionally good sound quality, without echo or interference.
The audio of the Robin SIP can also be configured as ‘half duplex’ , which will boost the volume
output and the microphone sensitivity.
No separate power supply
The Robin SIP is powered via ’Power-over-Ethernet‘ (PoE IEEE 802.3af).
This eliminates the need for a separate power supply; connection to a PoE network switch or
Midspan is all that is necessary.
Web-based configuration
The Robin SIP can be configured on a PC or Mac via a web browser (e.g. Firefox, Chrome, Safari).
Using a web browser, modification of all the settings for the Robin SIP is easy, regardless of the
physical location
of the Robin SIP.
In addition to configuring and programming the Robin SIP via the web browser, this application also
offers the option of viewing any activity in the vicinity of the Robin SIP in real time with the built-in
camera.
Because the software can be controlled with a web browser, configuration, viewing activity via the
camera, running diagnostics and testing can be performed from a remote location. You can even
access the Robin SIP from the other side of the world via Internet (depending on your firewall /
router settings).
Compatible with WEBRelay
The Robin SIP is compatible with an external IP relais, the WEBRelay Quad-LS. This external
device is equipped with 4 build-in relays and can be connected to the LAN.
The ‘Events’ mechanism in the Robin SIP can control the 4 relays (page 39).
gf7
7
Manual Robin Compact SIP ENG - v. 3.0.1
2 Operation
2.1 Operating the door phone
To ring the door phone, press on the bell-sign on the Robin SIP.
The unit will play a ringing sound and the predefined telephone set will be called.
2.2 Answering
Answer the Robin SIP by picking up the phone that is called by the Robin SIP.
2.3 Controlling the built-in door opener
The built-in door opener is controlled with predefined keys on the telephone set. When you activate
the door opener the attached door, fence or barrier will open.
You can change the default keys, a double # (##) in the interface of the Robin SIP.
gf8
8
Manual Robin Compact SIP ENG - v. 3.0.1
3 Installation
3.1 Package contents
The Robin SIP
USB stick with the manuals and the ‘Robin Discovery Utility’ software
anti-theft Allen key
4 anti-theft screws
4 wall plugs (6mm)
drilling template
tie-wrap
3.2 Installation dimensions
The installation dimensions of the Robin SV 1,2,4 and 6 buttons differ.
gf9
9
Manual Robin Compact SIP ENG - v. 3.0.1
Questo manuale è adatto per i seguenti modelli
2
Indice
Altri manuali Robin Sistema di interfono
