ROBINHOOD RHDDW60X Manuale utente
Installation and Operating Instructions Issue: 1
Description: ROBINHOOD DOUBLE DRAWER DISHWAHSER
Model Number: RHDDW60X
Model pictured: RHDDW60X
Actual unit may differ from image above
Contents
Congratulations!
Thank you for choosing one of our appliances. Before you use the appliance, we strongly recommend that you read
through the whole user manual which provides important safety instructions and description of the product and the
proper use of its functions.
To avoid the ever-present risks involved with using an electrical appliance it is vital that the oven is installed
correctly and that you read the safety instructions carefully to avoid misuse and hazards. It is important that you
retain these instructions and your proof of purchase along with any other important documents about this product
for future reference.
Due to continual product development, Robinhood reserves the right to alter specifications or appearances without
notice.
Important Safety Instructions………………………………………………………………………………………………………………………..3
Appliance Details……………………………………………………………………………………………………………………………………………4
Installation……………………………………………………………………………………………………………………………………………………..5
Operating Instructions………………………………………………………………………………………………………………………………….14
Cleaning and Maintenance…………………………………………………………………………………………………………………… …….30
Troubleshooting……………………………………………………………………………………………………………………………………………34
Product Specification ………………………………………………………………………………………………………………………………..…36
Warranty certificate (New Zealand) ………………………………………………………………………………………………………….37
Warranty certificate (Australia) ……………………..……………………………………………………………………………………………38
Disposal Information
Most of the packing materials are recyclable. Please dispose of these materials through your local recycling
depot or by placing them in appropriate collection containers.
If you wish to discard this product, please contact your local authorities and ask for the correct method of
disposal.
Important Safety Instructions
When using electrical appliances, in order to reduce the risk of fire, electric shock, and/or injury to
persons, basic safety precautions should always be followed, including
1. This appliance is intended to be used in household and similar applications , such as:
a. staff kitchen areas in shops, offices and other working environments;
b. farm houses;
c. by clients in hotels, motels and other residentialtype environments;
d. bed and breakfast type environments.
2. The appliance is not to be used by persons (including children) with reduced Physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction. Children being supervised not to play with the appliance.
3. The door is not left in the open position since this could present a tripping hazard.
4. When loading items to be washed:
a. Locate sharp items so that they are not likely to damage the door seal.
b. WARNING: Knives and other utensils with sharp points must be loaded in the basket
with their points facing down or placed in a horizontal position.
5. If the supply cord is damaged, it must be replaced by the manufacturer or its service agent
or a similarly qualified person in order to avoid a hazard.
6. After having installed the appliance, the switched outlet must always be in an accessible
position.
7. WARNING: Some dishwasher detergents are strongly alkaline. They can be extremely
dangerous if swallowed. Avoid contact with the skin and eyes and keep children away from
the dishwasher when the door is open. Check that the detergent receptacle is empty after
completion on the wash cycle.
8. Do not place any heavy objects on or stand on the door when it is open. The appliance could
tip forward.
9. Check that the detergent powder is empty after completion of the wash cycle.
10. Use only detergent and rinse additives designed for automatic dishwasher.
11. Do not operate your dishwasher unless all enclosure panels are properly in place.
12. Never use soap, laundry detergent, or hand washing detergent in your dishwasher.
13. The appliance is to be connected to the water mains using new hose sets and that old hose-
sets should not be reused.
14. During installation, the power supply cord must not be excessively or dangerously bent or
flattened.
15. Maximum: 7 place settings top drawer.
16. Maximum: 7 place settings bottom drawer.
17. Maximum: 1 MPa inlet water pressure.
18. Minimum: 0.04 MPa inlet water pressure.
This appliance is for indoor use only, for household use only. To protect against the risk of electrical
shock, do not immerse the unit, cord or plug in water or other liquid.
Please unplug before cleaning and maintenance the appliance .Use a soft cloth moisten with mild
soap, and then use a dry cloth to wipe it again.
3
Appliance details
IMPORTANT:
To get the best performance from your dishwasher, read all operating instructions before using it for
the first time.
Product Overview
4
Installation Instructions
Height (H1)
820 mm
Height (H2)
85-135 (Height of kick plate)
Width (W)
595 mm
Depth (D1)
570 mm
Depth (D1)
1080 mm (Drawer open)
5
Installation Instructions
Before Installation
Parts supplied
Mounting brackets (4)
(for drain hose coupling)
Ensure that the inner end of the tab
is protruding by one material thickness
Wire clamps (2)
(for drain hose coupling)
Hose clamp (1)
(for sink waste connection)
Drain hose coupling (1)
Moisture protection tape (1)
Drain hose support (1)
Kick plate brackets (2)
(For installing kick plate)
Screws (8)
6
Installation Instructions
Prepare the cavity
The cavity will need to conform to the dimensions in the diagram. The water supply and power point
for the appliance cannot be in the dishwasher cavity. Ideally they should be in an adjacent cavity,
easily accessed for isolating the product. An opening to allow the hoses and power cord to exit is
required on either side of the cavity with the minimum dimensions shown.
Prepare the dishwasher
Drawer dishwashers are unstable until they are secured to their surrounding cabinetry. Study the
two options for securing offered and choose one that suits your cabinetry. Fit the mounting brackets
supplied to the top or sides of the product, ensuring the locking tab effectively retains the bracket in
place. Adjust the tabs if needed.
With the aid of pliers pre form the bracket to match the surface it will be fitted to. Shorten the tab if
needed.
7
Installation Instructions
Installation method A: Attach top mounting brackets
Installation method B: Attach side mounting brackets
Fitting the dishwasher
Position the dishwasher in the cavity so the drawer fronts are in line with the adjacent cabinetry.
Draw the hoses and power cord through the opening as you slide the product in. This can be
checked by using a spirit level on an open drawer.
If need be, adjust the feet in each corner to ensure the
product sits evenly on the floor, and is level both left to
right and front to back. This can be checked by using a
spirit level on an open drawer.
8
Installation Instructions
Secure the product in place
With suitable fasteners, fix the mounting brackets to the cabinetry.
Install the kick plate
1. Prepare a kick plate as shown.
(The mounting hole position is measured by the machine at the factory state. If the height of the
feet is adjusted, the position of the mounting hole should be changed according to the actual
situation.)
2. Set the insertion length of the kick plate and bend the bracket teeth with pliers.
9
Installation Instructions
3. Secure the brackets to the kick plate with screws and install the kick plate to the bottom of the
dishwasher.
Cold Water Connection
The Inlet Hose supplied requires a 3/4 inch BSP Male fitting, suitable for a flat sealing washer.
A faucet is important for isolating the supply to the dishwasher.
Ensure that the sealing washer supplied inside the hose connection is firmly in place. Check that the
initial water is clean, particularly if the supply has not been used for some time.
If you need to install the kick
plate inside, please cut the kick
plate to the appropriate height
according to the actual situation,
and ensure that the clearance
between the bottom surface of
the kick plate and the ground is
at least 10 mm.
10
Indice
Altri manuali ROBINHOOD Lavastoviglie
