ROBOTIQ PE Series Manuale utente

Robotiq PalletizingSolution- PESeries

for Universal Robots

Instruction Manual

ROBOTIQ PALLETIZING SOLUTION

PE Series

robotiq.com | leanrobotics.org

Original Notice

Palletizing Solution - PESeries- Instruction Manual

Tableof Contents

Revisions 5

1. General Presentation 8

1.1. Palletizing SolutionComponents 8

1.2. Palletizing OperationDiagrams 10

2. Safety 12

2.1. Disclaimer 12

2.2. Intended Use 13

2.3. Warnings, RiskAssessment and Final Application 14

3. Installation 17

3.1. Scope of Delivery 18

3.2. Required Toolsand Equipment 19

3.3. Environmental and Operating Conditions 20

3.4. Mounting and Installation 21

3.5. OtherGrippers 42

3.6. InstallationforUniversal Robots 44

3.7. URCap Package 44

3.8. Robot Configurations 51

3.9. License Agreement 54

4. Operation 57

4.1. Starting Up 57

4.2. Light States 58

5. Software 59

5.1. Installation 59

5.2. MultipickFeature 61

5.3. Program 61

5.4. Wiring the MultipickFeature 79

5.5. Palletizing Script Functions 80

6. Specifications 84

6.1. Technical Dimensions 84

6.2. Mechanical Specifications 85

6.3. Electrical Specifications 88

7. Maintenance 90

7.1. Fasteners 91

7.2. PowerPickVacuum Gripper 92

7.3. Cleaning 92

7.4. SolutionStorage 92

8. Spare Parts, Kitsand Accessories 93

9. Troubleshooting 95

9.1. Palletizing Solution(except the PowerPickGripper) 95

9.2. PowerPickVacuum Gripper 98

10. Warranty 99

11. Harmonized Standards 101

11.1. Applied Standards 101

11.2. EC Declarationof Incorporation 102

12. Appendix 103

12.1. Anchoring Pattern 103

13. Contact 104

Palletizing Solution - PESeries- Instruction Manual

Revisions

Robotiq may modify this product without notice, when necessary, due to product improvements, modifications or changes in

specifications. If such modification ismade, the manual will also be revised, see revision information. See the latest version of this

manual online at: support.robotiq.com.

2023/01/31

lAirPick Gripper isreplaced by PowerPick Gripper. Sectionsare modified accordingly

lMultipick feature added in Software section.

lScript "Get Current Box Type" added in Software section.

lBox sensor(s)subsection modified in Installation section.

2022/11/22

lCable management installation improved (Installation section).

2022/10/03

lMaximum value for Elbow joint limit changed from 0° to 3°. Minimum and maximum valuesfor Wrist 3 joint limitschanged from -

270° to -273° and 270° to 273° (Installation section).

lCable management material and installation modified (Installation section).

2022/07/11

lComponentsimage modified in General Presentation section for modification of base covers

lStepsand imagesmodified in Installation section for modification of base covers.

2022/04/25

lAdded warning note for Moving and Positioning the Solution (Installation section).

lAdded an ''Avoid collision with conveyor'' option in the Palletizer node and the different configurations(Software section).

lAdded scripts''Get Pallet State'' and ''Set Palletizer State'' in Software section.

2022/03/28

lUpdated Electrical Specificationssection

lUpdated Push Button Enclosure Connection section

lUpdated Push Button Enclosure and Teach Pendant Rack section

lAdded Robot Limitssection

2022/02/03

lUpdated Physical Clearance and Reachable Area of the Robot section

lAdded new option in Copilot Configuration tab

lAdded new option in Palletizer node

lRemoved Force and Speed Robot Limitssection

lUpdated Harmonized Standardssection

2022/01/04

Initial Release

Palletizing Solution - PESeries- Instruction Manual

Thismanual and the product it describesare protected by the Copyright Act of Canada, bylawsof other countries, and by

international treaties, and therefore may not be reproduced in whole or in part, whether for sale or not, without prior written

consent from Robotiq. Under copyright law, copying includestranslation into another language or format.

Information provided by Robotiq in thisdocument isbelieved to be accurate and reliable. However, no responsibility isassumed

by Robotiq for itsuse. There may be some differencesbetween the manual and the product if the product hasbeen modified after

the edition date.

The information contained in thisdocument issubject to change without notice.

Palletizing Solution - PESeries- Instruction Manual

1.GeneralPresentation

The termsPalletizer,Palletizing Solution,Robotiq Palletizing Solution,Solution and PESeriesused in thismanual all refer to the PE

SeriesRobotiq Palletizing Solution. The PERobotiq Palletizing Solution isa hardware and software solution already connected and

ready to install. It is composed of a base fully integrated with a Robotiq Controller, pallet sensors, a pedestal, and a post with a

teach pendant rack and status lights. The Material Handling Copilot software and accessories (e.g., box sensor, anchor kit, cable

management system, etc.)are also part of the Solution.

Info

The following manual usesthe metric system. Unlessspecified, all dimensionsare in millimeters.

1.1.PalletizingSolutionComponents

Fig. 1-1: PESeriesRobotiq Palletizing Solution

Info

The following section presentsthe keyfeaturesof the Robotiq Palletizing Solution and must not be considered as

appropriate to the operation of the Solution. Each feature isdetailed in the appropriate section.

1.1.1.Base,PedestalandPost

The Robotiq Palletizing Solution iscomposed of a base, on which a pedestal, pallet sensorsand a Robotiq Controller are

mounted, and a post, on which a teach pendant rack, apush button enclosure, and statuslightsare mounted. The inner pedestal

section can be adjusted in height (13different positions)using aplunger latch.The Solution isdesigned to facilitate the

positioning of pallets. The base hasto be anchored to the floor. For more details, please refer to the Installation section

1.1.2.RobotiqController

All the componentsof the Solution are integrated and controlled viathe Robotiq Controller. It allowsfor the motion of the robot

during a palletizing action, and the control of the pallet sensorsand statuslights.

1.1.3.StandalonePost

The Solution also comprisesa post to which apush button enclosure, statuslightsand teach pendant rackare attached. The post

can either be mounted to the base or positioned elsewhere, adjacent to the base.

1.1.4.Pallet Sensors

The Solution iscomposed of four (4)sensorsto detect palletspresence (two per pallet). The sensorswill allow the Solution to

ensure that the palletsare well positioned on each side of the base to optimize the application process.

1.1.5.StatusLights

Two (2)statuslightsare positioned at the top of the post adjacent to the base. Each statuslight isassociated to the nearest pallet.

The color of the light givesinformation on the statusof the system or the state of a specific pallet. Please refer to the Light States

section for more information.

1.1.6.PowerPickVacuumGripper(Optional)

The PowerPickisa Vacuum Gripper that createsa vacuum with aventuri system that usescompressed air asan energysource. It

comeswith itsexternal controller, isequipped with multiple suction cupsand interchangeable components. Itsdesign is

optimized (weight, payload capability)for the Palletizing Solution when used with aUR10e robot.

Fig. 1-2: Robotiq PowerPick Gripper and Controller

1.1.7.BoxDetectionSensor

The Solution includesabox sensor that needsto be installed at the end of the conveyor in away that it istriggered when abox is

readyto be picked up.

Fig. 1-3: Box Sensor

Palletizing Solution - PESeries- Instruction Manual

1.2.PalletizingOperationDiagrams

The following diagramsexplain the logical operation of the Palletizing Solution based on the operator'sactions, aswell as

responsessuch assignals, pallet and box sensor behaviors, etc.

Please refer to the StatusLightssection for further information about light states.

Altri manuali per PE Series

Indice

Altri manuali ROBOTIQ Robotica

ROBOTIQ

ROBOTIQ 2F-85 Manuale utente

ROBOTIQ

ROBOTIQ HAND-E Manuale utente

ROBOTIQ

ROBOTIQ EPick Manuale utente

ROBOTIQ

ROBOTIQ Wrist Camera Manuale utente

ROBOTIQ

ROBOTIQ HAND-E Manuale utente

ROBOTIQ

ROBOTIQ CB Series Manuale utente

ROBOTIQ

ROBOTIQ 2-Finger 85 Manuale utente

ROBOTIQ

ROBOTIQ S Model Manuale utente

ROBOTIQ

ROBOTIQ AIR PICK Manuale utente

ROBOTIQ

ROBOTIQ AX Series Manuale utente

ROBOTIQ

ROBOTIQ PE Series Manuale utente

ROBOTIQ

ROBOTIQ CNC-RWC5-ES-UR-KIT Manuale utente

ROBOTIQ

ROBOTIQ PE20 Manuale utente

ROBOTIQ

ROBOTIQ AIR PICK Manuale utente

ROBOTIQ

ROBOTIQ ETF-CB-UR-KIT Manuale utente

ROBOTIQ

ROBOTIQ AirPick Manuale operativo e di manutenzione

ROBOTIQ

ROBOTIQ EPick Manuale utente

ROBOTIQ

ROBOTIQ HAND-E Manuale utente

ROBOTIQ

ROBOTIQ AirPick Vacuum Gripper Manuale utente

ROBOTIQ

ROBOTIQ 2F-85 Manuale utente

ROBOTIQ

ROBOTIQ SD-100 Manuale utente

ROBOTIQ

ROBOTIQ Sanding Kit Manuale utente

ROBOTIQ

ROBOTIQ 85 Manuale utente

ROBOTIQ

ROBOTIQ AirPick Vacuum Gripper Manuale utente

Manuali Robotica popolari di altre marche

STEMCenter USA

STEMCenter USA Pi-Bot v2.00 Manuale utente

SunFounder

SunFounder PiDog Manuale utente

Universal Robots

Universal Robots UR5 Manuale utente

Universal Robots

Universal Robots E Series Manuale utente

YASKAWA

YASKAWA MOTOMAN-MPL80 II Manuale utente

EFORT

EFORT ECR5 Manuale di istruzioni

Epson

Epson C8 Series Manuale utente

WowWee

WowWee ROBOQUAD Manuale utente

Milvus Robotics

Milvus Robotics SEIT 100 Manuale utente

RoboMaster

RoboMaster AI Robot 2020 Standard Version Manuale utente

fischertechnik

fischertechnik Mini Bots Manuale utente

YASKAWA

YASKAWA MA2010 Manuale

Abicor Binzel

Abicor Binzel iCAT mini Manuale utente

ABB

ABB OmniCore E10 Manuale utente

YASKAWA

YASKAWA Motoman DX200 Manuale utente

pitsco

pitsco Tetrix Max Manuale utente

ECOVACS

ECOVACS DEEBOT R95 Manuale utente

Feng Yuan

Feng Yuan Interstellar Warrior Manuale utente