rock space RSD0619 Manuale utente
AX1800 Dual-Band Wi-Fi 6 Router
Model No. RSD0619
Quick Installation Guide
Hot-line: +1(833)816-6558
Email: [email protected]
Service Time: EST 10:00-21:00 from Monday to Friday
Need FREE technical support?
Scan the QR code or visit
https://rockspaceworld.com
24/7 Online After-sales Service
RST/WPS button: Press the button for about 2 seconds to connect to WPS-enabled devices.
Press the button for more than 5 seconds to reset the router.
1. Power on the new router.
2. Connect the modem or your main Ethernet cable (if your Internet connection does not require a
modem) to the WAN port on the router. The WAN LED indicator turns on.
I. Get Started
II. Connect the Hardware
Modem
Internet
WAN
Ethernet cable
Power
WPS/RST Button
Indicator
Power Port
LAN Ports (orange) WAN Port (yellow)
For the best Wi-Fi performance,
position the antennas as shown.
III. Configure the Router
Method 1: Via RS Home APP
1. Download the RS Home App.
Download on the
App Store
Get it on
Google Play
2. Connect your smart phone to the router.
The default SSID is printed on the label at the bottom of the router.
3. Launch the RS Home App.
Note: If you are a new user, follow the onscreen instructions to register. With this App, you can manage
your network easily and conveniently no matter where you are.
4. The App detects your connection type automatically.
If detection fails, choose your connection type manually. There are 3 connection types supported,
please refer to FAQ > Q1 below.
RS Home
Method 2: Via a Web Browser
1. Connect to your router (wireless or wired).
Wireless
Find the SSID (network name) printed on the bottom label of the router and select the SSID from your
network list to connect your device to the network.
Wired
Turn o the Wi-Fi on your computer and connect to the router via an Ethernet cable.
Note: All pictures shown here are for illustration purpose only and actual pages may vary due to software update.
5. Set your Wi-Fi Name and Wi-Fi Password.
2. Connect the router to the Internet.
A. Launch a web browser and enter 192.168.0.1 in the address bar to log into the router’s web interface.
B. Select the correct time zone for your location from the drop-down list.
C. The webpage detects your connection type automatically. If detection fails, choose your connection
type manually. There are 3 connection types supported, please refer to FAQ > Q1 below.
IV. Manage the Router
Method 1: Via the RS Home APP
D. Set your Wi-Fi Name, Wi-Fi Password and Login Password.
Note: Enable the Encryption button to set your Wi-Fi Password, or your Wi-Fi will be public network.
After setup, you can manage the router via any of the methods below.
Connect your smartphone to the router’s network.
Launch the App and log in.
Manage the router as needed.
Method 2: Via a Web Browser
Connect your device to the router’s network. If you are using a computer, unplug the Ethernet cable if any.
Launch a web browser and enter 192.168.0.1 in the address bar to log in.
Manage the router as needed.
To check the full list of rock space Wi-Fi network devices,
scan the QR code or visit https://rockspaceworld.com
Please input the 8~63 characters.
Please input the 8~63 characters.
Enjoy the internet!
Method 1: Launch the RS Home App, go to Device Information > More Settings, and click Restore factory
setting. The router will reset automatically.
Method 2: Log in to the web management page, go to Advanced > Tools > System, click Reset. The router
will reset automatically.
Method 3: With the router powered on, press and hold the Reset button for about 5 seconds.
Q2: How can I reset the router?
Method 1: Launch the RS Home app, go to More Settings > WiFi Setting to manage the Wi-Fi name and
Wi-Fi password.
Method 2: Log in to the web management page, go to Wireless > Basic to reset your password.
Method 3: Reset the router to factory settings and create a new password.
Q3: What if I forget my Wi-Fi password of the router?
First make sure your device supports 5GHz band.
If it does, check the status of the 5GHz network. Turn on the 5GHz Wi-Fi if it's o through one of the
following methods:
A Via the RS Home app, go to More Settings > WiFi Setting.
B Via a web browser, go to Wireless > Basic.
Q4: Why cannot my device connect to the 5GHz Wi-Fi signal?
Check if the Ethernet cable with Internet connection is securely plugged into the WAN port rather than
the LAN port.
Check if your device is connected to the SSID of the router.
Then, follow the steps below:
1) Navigate to Homepage;
2) Click “+” in the upper right to add your device;
3) The app will detect the device and click Next Step to get started.
This is an approach you may adopt when you reconnect your device to the router but the connection fails.
Q5: What if the App could not recognize or connect to the device?
Dynamic IP (recommended) -- Obtain IP address from ISP automatically, choose this option if your ISP
does not provide username and password.
Static IP -- Choose this option if your ISP provided an IP address and other information.
PPPoE -- Choose this option if your Internet Service Provider (ISP) provided PPPoE username and password.
Q1: What connection type should I choose if the router fails to detect automatically?
FAQ
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment o and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
> Reorient or relocate the receiving antenna.
> Increase the separation between the equipment and receiver.
> Connect the equipment into an outlet on a circuit dierent from that to which the receiver
is connected.
> Consult the dealer or an experienced radio/TV technician for help.
This device is restricted to be used in the indoor.
Operation is subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including interference
that may cause undesired operation.
Radiation Exposure Statement
This device complies with FCC radiation exposure limits set forth for an uncontrolled environment
and it also complies with Part 15 of the FCC RF Rules.
This equipment should be installed and operated with minimum distance 20cm between the
radiator & your body.
Caution:
Any changes or modications not expressly approved by the party responsible for compliance
could void the user's authority to operate this equipment.
This transmitter must not be co-located or operating in conjunction with any other antenna
or transmitter.
NOTE: (1) The manufacturer is not responsible for any radio or TV interference caused by unauthorized
modications to this equipment. (2) To avoid unnecessary radiation interference, it is recommended to use
a shielded RJ45 cable.
Altri manuali per RSD0619
1
Indice
Altri manuali rock space Router di rete
Manuali Router di rete popolari di altre marche
NETGEAR
NETGEAR FS526T - Switch Manuale utente
Korenix
Korenix JetNet 5710G Series Manuale utente
Automated Logic
Automated Logic ZN551 Manuale del proprietario
Cisco
Cisco ASR 1000 Series Manuale dell'operatore
EnGenius
EnGenius ESR-9710 Manuale utente
Cisco
Cisco 805 Series Istruzioni operative e di sicurezza