Roland SP-404SX Manuale tecnico

SP-404SX System Update Version 1.07

This system program updates the SP-404SX system program to the latest version 1.07.

How to know the version

Before you start, check the system program version of your SP-404SX:

1. Turn off the power to the SP-404SX.

2. While holding down [MARK], turn the power ON.

3. The version will be displayed.

Note: * If this shows the latest version (Version 1.07 or later), there’s

no need to update your SP-404SX.

Update history

[Version 1.07]

[BUG FIX]

The following bug was fixed.

●When you exchanged samples between two pads assigning a

WAV file and a AIFF file, the samples were lost.

[Version 1.06]

[BUG FIX]

The following bug was fixed.

●SP-404SX might not detect certain SD memory cards.

[Version 1.05]

[IMPROVEMENT]

●After startup, the display remains as "- - -" until the unit can

start working and sound. It can be playable after the display

returns to BPM.

●After sampling is done, the display remains as "- - -" until

the sampled data is saved. Don't turn off the product until it

returns to the BPM display.

[BUG FIX]

The following bug was fixed.

●An SD Card might be unusable with the SP-404SX which was

erased by the "Disk Utility" that comes with Mac OS X.

What you will need to update your SP-404SX

●SP-404SX

●A USB cable included with a SP-404SX

●An SD Card (We recommend the SD Card that came with the SP-

404SX)

* The SD card needs to be formatted on a SP-404SX and have

2MB or more free space.

●A computer with an SD Card Reader/Writer.

Caution when performing the update

●Never apply this update data to any product other than the SP-404SX.

This update data may destroy the data or system program of other

products.

●A SD card for the normal usage (e.g. the card came with SP-404SX)

can be used for this updating. When you use it, we recommend that

you backup data on the SD card to your computer. Refer to the SP-

404SX owner's manual P.35 for backup operations.

●Be sure to power the unit using the AC adaptor. Executing the update

while running on only battery power may cause the update to fail and

result in incorrect operation if the batteries go dead before the update

finishes.

●Never power-off your SP-404SX while the update is in

progress!

●If a power failure or similar accident occurs during the update process,

the SP-404SX won’t be able to start up in normal operating mode. This

will require servicing, so you will need to contact Roland service center

near you if this occurs.

●We regret that we are unable to answer questions regarding the

update procedure using this system program. Please perform the

update responsibly, following the directions given in this document.

Getting the update file

Please open/extract the downloaded “sp404_sys_v107.zip” file on

your computer to get the update file named “sp404sx_up.bin” in

the “sp404_sys_v107” folder.

Procedure for the update

1. Start your computer to setup a SD Card Reader/Writer.

2. Insert the SD card to the SD Card Reader/Writer.

3. Copy the extracted file "sp404sx_up.bin" onto the root directory of

the SD card.

* Do not copy the “sp404_sys_v107” folder but the

actual “sp404sx_up.bin” inside the folder.

4. Un-mount the SD card through the correct procedure, then remove

from the SD Card Reader/Writer:

[ Windows ]

Use the Safely Remove Hardware icon in the Windows task tray to

un-mount the USB memory and then disconnect the USB memory

from your computer.

[ Mac ]

Drag the Drive icon of the USB memory into the trash in the dock

and then remove the USB memory from your computer.

5. Turn off the power to the SP-404SX.

6. Insert the SD card to the SP-404SX.

7. Turn the power on to the SP-404SX. The update process starts

automatically.

8. While updating, the "UPd" message will be displayed and the dot will

blink on the display.

9. When the update process is completed, the "Fin" message will be

displayed

10. Turn off the power to the SP-404SX and remove the SD card from the

SP-404SX.

11. Please verify the version number “1.07” with the procedure described

in “How to know the version” part of this document. After you

perform the update, you must delete the update file from the SD

memory card for normal usage.

Altri manuali per SP-404SX

Indice

Altri manuali Roland Apparecchiature di registrazione

Roland

Roland CD-2i Manuale utente

Roland

Roland V-Guitar System VG-99 Guida all'installazione

Roland

Roland Micro Composer MC-80EX Manuale utente

Roland

Roland MT 120 Manuale utente

Roland

Roland MPU-IPC-T Manuale utente

Roland

Roland 417741A Manuale utente

Roland

Roland TR-707 Manuale utente

Roland

Roland VP-03 Manuale utente

Roland

Roland AX-7 Manuale operativo e di manutenzione

Roland

Roland AX-7 Manuale utente

Roland

Roland VP-70 Manuale utente

Roland

Roland US-20 Manuale utente

Roland

Roland BR-1180 Manuale operativo e di manutenzione

Roland

Roland Chorus echo RE-301 Manuale utente

Roland

Roland E-4 Manuale utente

Roland

Roland A-37 Manuale del proprietario

Roland

Roland SC-7 Manuale utente

Roland

Roland Texart RT-640 Manuale utente

Roland

Roland S-220 Manuale utente

Roland

Roland A-37 Manuale utente

Roland

Roland BOSS GT-PRO Manuale utente

Roland

Roland Rhythm arranger TR-66 Manuale dell'operatore

Roland

Roland V-Card VC-1 D-50 Manuale utente

Roland

Roland BASS & DRUMS M-BD 1 Manuale utente

Manuali Apparecchiature di registrazione popolari di altre marche

KV2 Audio

KV2 Audio 500 Series Manuale utente

Robotics Technologies

Robotics Technologies microBus-Cam II Manuale utente

Seca

Seca 460 Manuale utente

Cognex

Cognex MVS-8000 Series Manuale utente

Mect

Mect MPNC006 Series Manuale utente

Bad Caf

Bad Caf THE LEASH Manuale utente

Strymon

Strymon NIGHTSKY Manuale utente

Mitsubishi Electric

Mitsubishi Electric 16CH DIGITAL RECORDER DX-TL5000U Manuale utente

Tews Technologies

Tews Technologies TPMC465 Manuale utente

Honeywell

Honeywell Excel 50 Manuale utente

SeaLevel

SeaLevel COMM+8.LPCI Manuale utente

Arturia

Arturia AUDIOFUSE STUDIO Manuale utente

Rukra

Rukra RK-1240 Manuale utente

Samson

Samson SCOM Manuale utente

Dynacord

Dynacord DPS260 Manuale utente

Nice

Nice Core Manuale utente

Pyle Pro

Pyle Pro PSS8 Manuale utente

RF-System

RF-System TinyGate Manuale per l'uso e la cura