Roland JUNO-106 Manuale utente

0101

Parameter Guide

JUNO-106

Model Expansion

2 3 4 5

6 7 8

This document explains about the parameters and setting screens for the ZENOLOGY Pro

Model Expansion.

The parameter names, the order in which they appear and other information may dier,

depending on the product.

1 SystemSystem

CONDITION

Simulates the changes that occur as a unit ages.

PITCH DRIFT

Adjusts the slight pitch drift that occurs when notes are

played on an analog synthesizer.

KEY MODE

[SOLO] button

Sound is produced monophonically.

[POLY] button

Sound is produced polyphonically.

[UNISON] button

Sound is produced in unison.

[SL-UNISON] button

Sound is produced in monophonic unison.

PORTAMENTO [OFF] [ON] button (PORTA MODE/PORTA TIME)

Selects whether portamento is applied to the performance and species the

portamento time.

PORTA CRV

[ORIG] button

Change according to the original

curve of the model.

[LIN] button

Change in a linear curve.

[EXP-1] button

Change in a non-linear curve (gentle

slope).

[EXP-2] button

Change in a non-linear curve (steep

slope).

[PRM EXP] button

(PARAM EXPANSION)

If this is ON, the range of the LFO

RATE, CUTOFF, RESONANCE, and

FILTER ENV DEPTH parameters are

extended beyond the range of the

original model.

2 LFOLFO

[RATE] knob (LFO RATE)

Species the rate of the LFO cycle.

[DELAY TIME] knob (FLO DELAY TIME)

Adjusts the time from when the key is pressed until the

LFO starts to apply modulation.

3 DCODCO

PWM

PM MODE = LFO: Adjusts the modulation depth.

PM MODE = MANUAL: Adjusts the pulse width.

[LFO] [MAN] button (PW MODE)

Selects whether the pulse width is modulated by the LFO

(LFO) or kept at the xed value specied by PULSE WIDTH

MOD (MANUAL).

[ (PWM wave)] button (PW SWITCH)

Turns the PWM wave on/o.

[ (Sawtooth wave)] button (SAW SWITCH)

Turns the sawtooth wave on/o.

[RANGE] knob (OSC RANGE)

Species the octave of the oscillator.

16’, 8’, 4', 2’

LFO (OSC LFO MOD)

Uses the LFO to vary the pitch (vibrato).

USUB (SUB LEVEL)

Adjusts the volume of the sub oscillator.

NOISE (NOISE LEVEL)

Adjusts the volume of the noise.

4 HPFHPF

[FREQ] knob (HPF STEP)

Sets the high-pass lter’s cuto frequency in four steps.

0, 1, 2, 3

5 VCFVCF

[R] [M] [S] buttons (VINTAGE FLT TYPE)

If a vintage type model is selected, these buttons change the type of lter.

[R] models a Roland lter, and [M] and [S] model vintage synthesizers made by

other companies.

[FREQ] knob (CUTOFF)

Species the cuto frequency of the low-pass lter.

The frequency region above the cuto frequency is cut,

producing a more mellow tonal character.

[RES] knob (RESONANCE)

Boosts the region of the lter’s cuto frequency. Higher

values produce a stronger result, giving the sound a

distinctively synthesizer-like character.

Polarity buttons

Specify the polarity of the lter.

ENV (FLT ENV DEPTH)

Adjusts the amount by which the cuto frequency is

controlled by the envelope.

LFO (FILTER MOD)

Adjusts the amount by which the LFO modulates the

cuto frequency.

KYBD (FLT KEY FOLLOW)

Adjusts the amount by which the keyboard pitch aects

the cuto frequency (key follow). With smaller values, the

cuto frequency becomes lower as you play higher notes.

6 VCAVCA

[LEVEL] knob (AMP LEVEL)

Adjusts the volume of the tone.

[ENV] [GATE] button (AMP ENV SEL)

Species whether the volume is controlled by the ENV

(ENV) or by the gate signal (GATE).

7 ENVENV

Envelope

You can edit the ADSR settings of the envelope.

[A] knob (ENV ATTACK)

Adjusts the Attack time.

[D] knob (ENV DECAY)

Adjusts the Decay time.

[S] knob (ENV SUSTAIN)

Adjusts the Sustain level.

[R] knob (ENV RELEASE)

Adjusts the Release time.

8 MFXMFX

MFX parameters

The edit screen is dierent for each MFX type.

[MFX] button

Turns MFX on/o.

[MFX TYPE] indication

Shows the currently selected

MFX name.

[MFX LEVEL] knob

Adjusts the MFX output level.

Altri manuali per JUNO-106

Indice

Altri manuali Roland Sintetizzatore

Roland

Roland JUPITER-8 Manuale utente

Roland

Roland V-Synth GT Manuale operativo e di manutenzione

Roland

Roland BK-5OR Manuale utente

Roland

Roland V-Synth XT Manuale operativo e di manutenzione

Roland

Roland JX-10 Manuale utente

Roland

Roland CUBE-40XL Manuale operativo e di manutenzione

Roland

Roland JUPITER-8 Manuale utente

Roland

Roland JUNO 6 Manuale utente

Roland

Roland JV-50 Manuale utente

Roland

Roland JP-4 Manuale operativo e di manutenzione

Roland

Roland Super JX MKS-70 Manuale elenco delle parti

Roland

Roland E-86 Manuale utente

Roland

Roland Gaia SH-01 Manuale utente

Roland

Roland HP -6 Manuale utente

Roland

Roland GR-30 Manuale utente

Roland

Roland RS-505 Manuale operativo e di manutenzione

Roland

Roland GW-7 Manuale utente

Roland

Roland BK-5 Istruzioni per l'installazione e il funzionamento

Roland

Roland SH-1000 Manuale utente

Roland

Roland Lucina AX-09 Manuale utente

Roland

Roland E-5 Manuale utente

Roland

Roland D-50 Manuale utente

Roland

Roland Sound Canvas SC-88 VL Manuale utente

Roland

Roland GR-20 Manuale utente

Manuali Sintetizzatore popolari di altre marche

Kawai

Kawai MP7 Manuale tecnico

Joranalogue

Joranalogue Contour 1 Manuale utente

Full Bucket Music

Full Bucket Music Mono/Fury Manuale utente

Kawai

Kawai PH50 Manuale utente

IK Multimedia

IK Multimedia UNO Synth PRO X Manuale utente

Behringer

Behringer DEEPMIND 12 Manuale utente

Gotharman

Gotharman Gotharman's anAmoNo-box Manuale utente

Yamaha

Yamaha DX21 Manuale utente

QuStream

QuStream HDFS-550 Manuale utente

Modal Electronics

Modal Electronics ARGON8 Manuale utente

Octave

Octave Cat SRM Manuale utente

Dreadbox

Dreadbox Murmux Initiate Manuale utente

neutral labs

neutral labs ELMYRA 2 Manuale utente

Waldorf

Waldorf KYRA Manuale utente

Tubbutec

Tubbutec Juno-66 Manuale utente

EFM

EFM VCADSR - 3510 Manuale utente

Yamaha

Yamaha MOTIF XF Manuale utente

Korg

Korg Poly-800 Manuale utente