Roland BR-900CD Guida alla risoluzione dei problemi
1
BR-900CD
Version 2.10 UPDATE CD
INSTRUCTION FOR SYSTEM
PROGRAM UPDATE
Certain malfunction in storing data into the memory card has been detected.
Some parts of song data on the BR-900CD may rarely become unusable due
to this defeat. We highly recommend our customers to update the system
program of the BR-900CD according to this instruction. We sincerely
apologize for any inconvenience caused by this.
You may find another INSTRUCTION sheet for update attached to the BR-900CD.
But please be sure to update your BR-900CD with using this “BR-900CD Version
2.10 UPDATE CD.”
© 2008 BOSS CORPORATION
All rights reserved. No part of this publication may be reproduced in any
form without the written permission of BOSS CORPORATION.
BR-900CD
BR-900CD_l_v210p_e1 1 ページ ２００８年３月２８日 金曜日 午後７時２分
2
The files of the BR-900CD System
Program Ver.2.10 come contained on this
CD. You can update your BR-900CD to
Ver. 2.10 with this CD.
Please be sure to read the following
instruction in order to have updating
properly completed.
■
Items required for
the update
• BR-900CD
• This CD (BR-900CD Ver. 2.10
update CD)
■
Precautionary notes to
be observed in
updating (IMPORTANT)
Please be sure not to turn the BR-900CD
off while updating. Unforeseen problems
due to the power-off during the updating
may corrupt the system of the BR-900CD
and make it unusable. If this occurred,
please contact the local Roland Service.
Please be sure not to turn the BR-
900CD off while updating. Unforeseen
problems due to the power-off during
the updating may corrupt the system of
the BR-900CD and make it unusable. If
this occurred, please contact the local
Roland Service.
BR-900CD_l_v210p_e1 2 ページ ２００８年３月２８日 金曜日 午後７時２分
3
■
Updating procedure
1.
Turn the BR-900CD on while
holding [STOP] and [PLAY]
simultaneously.
Please keep holding down the buttons until
below message appears on the display.
2.
Press the EJECT button on the
CD-R/RW drive to open the disc
tray.
3.
Put the UPDATE CD on the tray
and close.
BR-900CD will automatically start
loading the program files and the
message “Update PROGRAM? Ver
*.** to 2.10” will be shown on the
display.
4.
Press the [ENTER/YES] to start
updating.
* If you would like to cancel the
update, please press [EXIT/NO].
5.
The display will show the
message “Update Ver 2.10 Are
you sure?” If you are sure you
would like to proceed updating,
please press [ENTER/YES]
again.
The update will start and the
message “Keep power on” will be
appeared on the display.
CD Program Load
Insert DISC.
Update PROGRAM?
Ver *.** to 2.10
BR-900CD_l_v210p_e1 3 ページ ２００８年３月２８日 金曜日 午後７時２分
4
* If you would like to cancel the
update, please press [EXIT/NO].
* Never turn the BR-900CD off while
updating.
6.
When the update is completed,
the display indicates
“Completed! Please restart.”
7.
Turn off the BR-900CD and
then turn its power on again.
1N
BR-900CD_l_v210p_e1 4 ページ ２００８年３月２８日 金曜日 午後７時２分
Altri manuali per BR-900CD
2
Altri manuali Roland Registratore vocale
Roland
Roland BR-800 Manuale utente
Roland
Roland Edirol R-1 Manuale
Roland
Roland MSQ-1QO Manuale utente
Roland
Roland R-09 Manuale operativo e di manutenzione
Roland
Roland R-09 Manuale utente
Roland
Roland BR-1200CD Manuale operativo e di manutenzione
Roland
Roland VSR-880 Manuale utente
Roland
Roland BR-1600CD Manuale operativo e di manutenzione
Roland
Roland BR-900CD Manuale utente
Roland
Roland Edirol R-05 Manuale utente
