Rolls MS211 Manuale utente
SPECIFICATIONS:
IN Connectors: XLR
OUT Connectors: XLR
Size: 5"w x 5"d x 1.5"h
Passive design, NO power, NO electronics and NO distortion.
Thick powder coated steel chassis..
100% Handcrafted in Salt Lake City, UT.
Rolls Corporation
Salt Lake City, UT
7/19
Made in USA ww.rolls.com
Made in USA ww.rolls.com
MS211
Push to talk or
Push to mute
Mic Stand
The MS211 PTT or PTM mic stand is a passive design.
That means NO power required, NO electronics used and
NO distortion will ever be added.
The chassis is made from .090" steel, meaning it is 3 times
thicker than most chassis. Female XLR jack for connection
to your mic and Male XLR for output.
All this and it is 100% Handcrafted in Salt Lake City, UT.
What's in the box?
1 - Made in USA MS211
1 - This owners manual
0 - Power supply (its an all pas-
sive unit)
Thank you for purchasing the MS211. We sincerely appreci-
ate the opportunity to build a product for you and participate
in your love of quality music and sound. We love what we do
and we’re happy to help. Rolls products are hand built in Salt
Lake City, Utah by people who care about high quality audio.
MS211 Mic Stand
- XLR input and output jacks
- Momentary Switch
- Bottom panel screw holes for convenient mounting
- Can function as push to talk or Push to mute
This device momentarily mutes (or talks) a microphone
signal. This function is very handy in the event of a
sneeze, cough, or other possible distracting noise. Or
when you need to control when a mic is active for an-
nouncing or paging.
MS211
MADE IN USA
www.rolls.com
The MS211 rear panel has two screw holes for convenient mounting.
OPERATION: To mute a microphone signal, connect the balanced XLR cable to the microphone, and to the female input jack on
the MS211. Connect the XLR male output jack to another cable, and its end to your next device. Press and hold the switch for
the amount of time you want the signal muted. To hear the mic signal again, release the switch. The MS211 can be congured to
“push to talk” or “Push to mute” by selecting the internal switch. The switch can be accessed from the side of the MS211.
Switch for changing the
orientation of the MS211
from Push to Talk when
the switch is in, or Push to
Mute when the switch is
out.
Momentary switch
XLR jacks: Female
input, Male output
Altri manuali Rolls Microfono
