Romus 96200 Manuale utente
Attention: Please read the following instructions carefully to ensure that mounting operation will be carried
out in the right way .These instructions should be properly preserved for future reference. This lamp can not
be used on building sites, engineering workshops and similar applications.
I.Main construction ate
Type : 96200
Rated Power : Max 500 W
Glass : 177 x 140 x 5 mm
Weig t : 1.56 kg
Dimensions : 3178 x 230 x 210 mm
Electric s ock protection class:Ⅰ
External lig t protection class: IP54
Lamp socket size:R7s
Rated voltage: 220-240V~ 50Hz
Cable:H05RN-F 3G1.0mm
2
II.Safety instructions
1. Don’t touc t e ot surface by and during adjustment and normal operation because of ig
temperature.
2. Far away from t e products easy to burn or burst.
3. Don’t look at t e bulbs directly wit eyes.
4. Don’t use t e item wit out glass and stand.
5. Replace any cracked protective s ield.
6. T e bulbs couldn’t exceed t e rated power.
7. T e distance between t e item and t e objects must be more t an 1M.
8. If t e external flexible cable or cord of t is luminaire is damaged, it s all be exclusively replaced by t e
manufacturer or is service agent or a similar qualified person in order to avoid a azard.
III.Electrical safety
T is alogen lamp must be eart ed. If it becomes necessary to re-wire t e plug please follow t ese guidelines.
Always secure wires in plug terminals carefully. Make sure t e cable is firmly located in t e cord grip. NEVER
connect t e green & yellow wire to any terminal ot er t an one marked wit t e eart symbol ‘E’ or ‘ ’,
regularly inspect all electrical connections and wiring for damage Any faults s ould be immediately rectified
before furt er use of t is alogen lamp. Always ave t e wiring and connections c ecked by a qualified
electrician. In use, ensure all wiring and extension cable are kept clear of any cutting tools, s arp objects and
any ot er potential azard suc as wet floors, c emicals, solvents etc.
NOTE: If your mains wiring differs in any way from Diagram A. Consult a qualified electrician. Always ensure
t at t e mains supply voltage is correct. Always replace t e fuse wit one of an identical rating.
IV.Assembly and use
HALOGEN LAMP
Réf. 96200
INSTRUCTIONS FOR USE
Slide t e stand into t is alogen lamp bracket (G) . Align t e oles in t e bracket and t e stand. Insert and
tig ten angle adjustment screw knob (D) . To alter t e angle of t is alogen lamp, simply loosen t e angle
adjustment screw knob(D) , pivot t is alogen lamp until t e desired angle is ac ieved and re-tig ten knob (D).
C eck t is alogen lamp are secure and t at t e stand is stable and as a firm footing. Ensure cable is not
catc ing on any s arp object and t at t e mains plug connection is adequately protected against rain or
moisture. Your alogen lamp is now ready for use.
V.Fitting the bulb
To fit t e supplied alogen bulbs you need to loosen t e screw( B )securing t e inged front cover and swing
t e cover down, T e bulb is attac ed by spring loaded olders at eac end. Gently locate t e bulb into position
ensuring good contact at bot ends. Take care not to touc t e glass of t e bulb if t is does occur clean t e
bulb wit met ylated spirit. Close t e inged front cover and re-tig ten t e top retaining screw(B) .
T e lig ting direction can not be adjusted to down ward.
VI. Change the bulb
1.Before maintenance and replacement of bulb always make sure t e power supply as been switc ed off.
2. Open t e lamp cover.
3.Twist t e old bulb out carefully.
4.Twist a new bulb into t e socket. Make sure t at new bulb fits tec nical data of your lamp.
5. Close t e lamp cover.
WARNING: The maintaining should be done only by a qualified electrician.
Parts Identification
Spare halogen lamp – Ref. 96201
T is marking indicates t at t is product s ould not be disposed wit ot er ouse old
wastes t roug out t e EU. To prevent possible arm to t e environment or uman ealt
from uncontrolled waste disposal, recycle it responsibly to promote t e sustainable reuse
of material resources. To return your used device, please use t e return and collection
systems or contact t e retailer w ere t e product was purc ased. T ey can take t is
product for environmental safe recycling.
A
C
D
E
F
B
A : Padded Carry Handle
B : Cover Retaininfg Screw
C : Protective Grill
D : Angle Adjustment Screw Knob
E : Stand
F : Mains cable
Indice
Altri manuali Romus Luce esterna
Manuali Luce esterna popolari di altre marche
Lindby
Lindby 9949029 Manuale utente
HEPER
HEPER DOGO Side LW6048.585-US Istruzioni per l'installazione e il funzionamento
HEPER
HEPER LW8034.003-US Istruzioni per l'installazione e il funzionamento
Maretti
Maretti VIBE S 14.6080.04.A Manuale utente
BEGA
BEGA 84 253 Manuale
HEPER
HEPER MINIMO Istruzioni per l'installazione e il funzionamento
LIGMAN
LIGMAN BAMBOO 3 Manuale utente
Maretti
Maretti TUBE CUBE WALL 14.4998.04 Manuale utente
Maxim Lighting
Maxim Lighting Carriage House VX 40428WGOB Manuale utente
urban ambiance
urban ambiance UQL1273 Manuale utente
TotalPond
TotalPond 52238 Manuale utente
Donner & Blitzen
Donner & Blitzen 0-02661479-2 Manuale utente