Ronda QM2 Manuale utente

Installation, Use & Care
Guide
Double Drawer / Not insulated Units QM2

IL-MO-045 Rev. 0 05/2010
Double Drawer Unit – QM2
not insulated
Pag. 2 / 12
PROFESSIONAL INSTALLATION REQUIRED
Welcome & congratulations
Congratulations on your purchase of this double drawer.
We at Ronda are very proud of our product and we hope you consider us for fu-
ture purchases.
This product is made in our factory in Italy with components all made in Italy.
For any questions contact us at : info@ronda.it
PLEASE READ CAREFULLY AND SAVE THESE INSTRUCTIONS
Packaging contents:
# 1 SMC Frame
# 2 Drawers
# 3 Stainless Steel Frame
2
2
1
3

IL-MO-045 Rev. 0 05/2010
Double Drawer Unit – QM2
not insulated
Pag. 3 / 12
PROFESSIONAL INSTALLATION REQUIRED
Notes and Installation Tips
ALWAYS USE PROTECTION GLOVES AND EYE SAFETY GOGGLES:
Use care and always use protection gloves and safety goggles during in-
stallation and care. Because the drawers may have sharp edges, if not
handled with care they can cause cuts and abrasions.
Tools you will need : Power screw driver, manual screw driver, level, tape
measure.
Carefully unpack cabinets making sure not to scratch stainless steel fronts
and not to loose or misplace any components.
DO NOT remove polyethylene protective coating until installation is com-
plete.
Remove all drawers before installation. This will make cabinet easier to lift
and install and give access to installation hardware.
This product is made only for application on a subframe, which can be
made in different materials (wood, plastic, alluminium) into a wall structure
(Fig. 1)
Do not use the drawers as ladder. This would be dangerous for you and can
cause the item to break.
Fig. 1
a
b
Subframe

IL-MO-045 Rev. 0 05/2010
Double Drawer Unit – QM2
not insulated
Pag. 4 / 12
PROFESSIONAL INSTALLATION REQUIRED
Before Installation
Verify model number on the box label.
Verify the counter hole measure refering to the following table :
The maximum deviation permitted is : 0.04’’ (1 mm). Otherwise the SMC
frame get deformed and drawers don’t work properly. Use spacers to get
the right counter hole dimensions.
Check with a level that the wall is plumb.
Verify with a level the horizontal and vertical level of the counter hole and
correct if not accurate.
Counter Hole
Model a b
+0,04 + 0,04
inch
16,96
0
24.44
0
+1 +1
QM21
mm 431
0
621
0

IL-MO-045 Rev. 0 05/2010
Double Drawer Unit – QM2
not insulated
Pag. 5 / 12
PROFESSIONAL INSTALLATION REQUIRED
Assembly and Installation
1.
Carefully unpack cabinet making sure not to scratch stainless steel fronts.
Stainless is protected by a plastic coating that must be removed after
setup.
2.
Remove drawers and store in a safe place.
3.
Use protection gloves
4.
Put the frame inside the
counter hole.

IL-MO-045 Rev. 0 05/2010
Double Drawer Unit – QM2
not insulated
Pag. 6 / 12
PROFESSIONAL INSTALLATION REQUIRED
5.
Be sure that the SMC
frame fits well in the wall.
If not, use spacers to fit.
6.
Secure the SMC frame to
the wall with screws into the
dedicated matching holes.
Use # 10 mushroomhead
screws (not included).
The use of screws with dif-
ferent heads can cause an
interference with the
drawer guides.

IL-MO-045 Rev. 0 05/2010
Double Drawer Unit – QM2
not insulated
Pag. 7 / 12
PROFESSIONAL INSTALLATION REQUIRED
7.
Insert the drawer rear
wheels into the guide
slots.
To do this easier you
must incline the front
down a bit.
8.
Close thedrawer completely
and repeat theoperation for
thesecond drawer.

IL-MO-045 Rev. 0 05/2010
Double Drawer Unit – QM2
not insulated
Pag. 8 / 12
PROFESSIONAL INSTALLATION REQUIRED
Care and cleaning
It is imperative that the owner realizes that he/she is required to perform
reasonable maintenance and care of the drawers in order to maintain the
manufacturers warranty. Failure to perform reasonable maintenance and
care may void the warranty.
The following is a list of maintenance steps and things to avoid. This is
not intended to be a complete list, but is to be used as a guideline for
general care.
Carefully remove protective plastic peel coat from each stainless steel surface.
External Surfaces:
Clean stainless with stainless steel cleaner in direction of grain. Rubbing across
the grain direction may produce minor scratches. Recommended cleaners are
Weiman
©
, Stainless Steel Magic
©
and Sheila Shine
©
.
In a salty air environment, a slightly more oily cleaner like Sheila Shine
©
will
protect better against oxidation, pitting or slight surface rust. Cleaning the sur-
faces periodically will protect the finish for many years. In a heavily salty area,
you will have to clean more frequently as salt breaks down into highly corrosive
chlorine that will attack the metal. Surface corrosion will not affect performance
of the product, but will affect the look.
DO NOT USE scratchy pads, scouring pads, or stiff sponges for cleaning. Do
not use abrasive detergents, powdered cleansers or detergents containing acid
substances or bleach.

IL-MO-045 Rev. 0 05/2010
Double Drawer Unit – QM2
not insulated
Pag. 9 / 12
PROFESSIONAL INSTALLATION REQUIRED
Removing and cleaning the magnetic gasket :
•Carefullyinsertascrewdriverintoacornerof
thegasket(1).
•Liftthegasketuntilitexits fromtheseat(2).
•Removethegasket byhand(3).
•Cleanwithwaterandneutraldetergent.
•Insertthegasketinitsseatand strongly
pressitonalltheperimeter.Youcanlubri-
catethegasketseattodothiseasly.
Drawer Guides
Drawer load capacity should not exceed 50 lbs per drawer. Never use an ex-
tended drawer for a ladder or a work platform.
1
2
3

IL-MO-045 Rev. 0 05/2010
Double Drawer Unit – QM2
not insulated
Pag. 10 / 12
PROFESSIONAL INSTALLATION REQUIRED
WARNINGS
•Surfaces can be very hot when exposed to direct sunlight.
•Molds can form if not properly dried.
•Do not use as a ladder.
•Avoid any contact with electrical outlets or wires.
•This is only a food container. It is not a refrigerated space,
and will not prevent food spoilage.
•If exposed to temperatures below – 4 °F and above + 120 °F
deformation and malfunction of the drawers can occur.
•If installed adjacent to the heating elements of a barbeque,
insulation can be less effective.
•If installed near to the sea, damage from salty water can oc-
cur.
•Keep drawers closed when not in use.
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Ronda Cassetto LCD
Manuali Cassetto LCD popolari di altre marche

Acnodes
Acnodes KD 8228 Manuale utente

Ameriwood
Ameriwood 9524328PCOM Manuale utente

Kesseböhmer
Kesseböhmer TANDEM solo Manuale utente

Crystal Image Technologies
Crystal Image Technologies RMD-151-A Series Manuale utente

APW Wyott
APW Wyott Ease Extreme HDX-1-120 Manuale utente

NTI
NTI RACKMUX-V17-N Manuale utente

GRASS
GRASS DWD XP Manuale utente

StarTech.com
StarTech.com DuraView RACKCONS1701 Manuale utente

Fisher & Paykel
Fisher & Paykel IZONA CoolDrawer RB36S Manuale utente

Synergy Global Technology
Synergy Global Technology LCD1U17-44 Manuale utente

Fujitsu
Fujitsu RC25 Manuale utente

Acnodes
Acnodes RK 1000B Manuale utente






