Ronix RWS-XE5DIP3610M-IR Manuale utente

5Mega pixel Motorized Zoom

Network Bullet Camera

Before installing and using this product,

please read the instruction fully and keep it handy for later use.

5MP

Preliminary

Operating Instruction

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

To prevent fire or shock hazard, do not expose the unit to rain or moisture.

To prevent electric shocks and risk of fire hazards, do NOT use other than

specific power source.

Warning :

This equipment has been tested and found to comply with the limits for a Class

A digital device, pursuant to part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference when the equipment

is operated in a commercial environment. This equipment generates, uses, and

can radiate radio frequency energy and, if not installed and used in accordance with

the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at

his own expense.

Caution :

Any changes or modifications in construction of this device which are not expressly

approved by the party responsible for compliance could void the user's authority

to operate the equipment.

Mains power quality should be that of a typical commercial environment. If the user

of the model requires continued operation during power mains interruptions, it is

recommended that the model be powered from an uninterruptible power supply

(UPS) or a battery.

The symbol is intended to alert the user to the presence of important

operating and maintenance(servicing) instructions in the literature

accompanying the unit.

The symbol is intended to alert the user to the presence of uninsulated

"dangerous voltage" within the product's enclosure that may be of

sufficient magnitude to constitute a risk of electric shock to persons.

Safety Precaution

MEGA-PIXEL NETWORK CAMERA

Safety Precaution

MEGA-PIXEL NETWORK CAMERA

NOTICE

• The image used in this instruction manual are processed to help comprehension

and may differ from actual video of the camera.

• Avoid installing areas where has shock or vibration which results in the problems.

• Pay attention to safety when laying the connection cable and observe that the cable

is not subjected to heavy loads, kinks or damage and no moisture can get in.

• Never open the device such as boards or lens.

The warranty becomes void if repairs are undertaken by unauthorized persons.

• Maintenance and repair have to be carried out only by authorized service centers.

• Use only a mild detergent to clean the housing body only but never for the clear

bubble dome.

• The camera should never be operated beyond the technical specifications.

This can lead to destruction.

• The camera should never be operated in water.

Contents

MEGA-PIXEL NETWORK CAMERA

Safety Precaution

p.03~04

Contents

p.05

Features

p.06

Composition

p.07

Dimensions

p.07

Part Names

p.08

Installation Instructions

p.09~11

Operating Instructions

p.12~20

Troubleshooting

p.21~22

Specifications

p.23~24

Features

MEGA-PIXEL NETWORK CAMERA

• 5.04Mega Pixel, NETWORK CAMERA, 2592x1944(15p/12.5p)

• ONVIF Conformance

• Zero configuration

• Cross Web Browsing (IE, Edge, Safari, Firefox, Chrome)

• Adaptive web resizing depending on layout & resolution of

display device by RESPONSIVE WEB

• Increased usability for all PC, tablet and mobile

• Simultaneously H.264 & MJPEG (Triple streaming)

• 2 Way Audio & Alarm input/output

• ONVIF Event Mapping

• HTML5 playback

• Slot for Micro SD memory card

• f=3.6~10mm F1.5, 6Mega pixel Motorized Zoom lens

• Dual Filter Switcher

• SNAP Focus by Motorized Zoom lens

• Motorized Zoom & Focus Adjustment

• D-WDR (Digital Wide Dynamic Range)

• Improved noise figure with the enhanced 3DNR

• Motion Detection, Privacy Mask, Tamper, Defog, BLC/HLC, Hue,

D-Zoom(~16x), Mirror/Flip, LDC(Lens Distortion Correction), Contrast,

Brightness, Saturation, Sharpness, Auto-Flickerless, VerticalView

• Circuit protection against faulty connection in power polarity

• Isolated power supply against ground loop problem

• PoE(IEEE Std. 802.3af) & AC24V/DC12V

• Built-in 4pcs High power LED

• Built-in LED Auto/Off Switch

• Built-in Fan & Optimized Cooling system

• Dual Window

• One touch 3-Axis locking bracket

• IP68 Protection

Composition

Dimensions

MEGA-PIXEL NETWORK CAMERA

(unit : mm)

Installation CD

Coupler for

RJ45 Cable (1pc)

Wiring Connector

(1pc)

Cable Signal

Sticker

Torque Wrench:

3mm (1pc)

Mounting Template

Operating Instruction

Camera

Easy

Bracket

267

108

87.30

100

86.40

75.90

190

Mounting Screw:

4 x 30mm (4pcs)

Plastic Anchor:

6 x 30mm (4pcs)

Assembly Screw:

4 x 15mm (4pcs)

Part Names

MEGA-PIXEL NETWORK CAMERA

• Extreme care should be taken NOT to scratch the surface of window while

the camera installing or adjusting.

• Care should be taken the cable is NOT to be damaged, kinked or exposed in

the hazardous area.

• Do not expose the camera directly to a strong light source such as the sun or

spot light.

CAUTION

Cover Open

Micro

SD Card Slot

Reset Button

LED Control Switch

POWER

CABLE

DUAL WINDOW

SUNSHIELD BOLT

SUNSHIELD

FRONT CASE

EASY

BRACKET

LOCK/UNLOCK

SCREW

BRACKET

REAR CASE

Installation Instructions

MEGA-PIXEL NETWORK CAMERA

1. Locate the mounting template at the installation position and drill the ceiling or

wall if needed. ( *The easy bracket can not be installed on the ceiling)

2. Place the easy bracket on pre-drilled position and fix it through using mounting

screws(4x30mm). Skip this step when an easy bracket is not installed.

3. Route the power cable to the connecting place.

Hook up the camera bracket with the easy bracket as illustrated below.

4. Fix the camera bracket through using assembly screws (4x15mm).

5. Set the camera’s viewing angle.

6. Put the sunshield to the camera unit and tighten the sunshield-bolts.

Torque Wrench

Assembly Screw

: 4x15mm

Mounting Screw

: 4x30mm

REAR VIEW

Cable exit

Installation Instructions

MEGA-PIXEL NETWORK CAMERA

• Unlock the screw on the camera bracket through using the torque wrench supplied

• Set the camera’s viewing angle then lock the screw on the bracket.

Pan & Tilt adjustments

1) Pan limit:

Pan is limited to +/- 90°.

3) Inclination limit

(Horizontal image alignment):

Inclination limited to +/-90° max.

2) Tilt limit:

Tilt is limited to 0°(2°) min ~ 90° max.

for wall(ceiling) installation respectively

with reference to the wall(ceiling) when

the inclination of camera module is 0°,

that is, the image is aligned horizontally.

90° 90°

88°

90°

±90°

• on the wall • on the ceiling

■Adjustment of viewing angle with a bracket

Torque

wrench

Lock/Unlock

Screw

Indice

Altri manuali Ronix Telecamera di sicurezza

Ronix

Ronix RNP-AH2NPD2812-IRM Manuale utente

Manuali Telecamera di sicurezza popolari di altre marche

Okina USA

Okina USA SIR36-870VF650LP Manuale utente

Divio

Divio NDR155PA Manuale utente

Canon

Canon VB-C500D Manuale utente

Easy Access

Easy Access EasyGuard Manuale utente

Vivotek

Vivotek FD9389-EHV-v2 Manuale utente

TUYA

TUYA COSMO W2 Manuale utente

Eusso

Eusso UNC7500-IR Guida all'installazione

urmet domus

urmet domus 1096/204 Manuale utente

VC VC20 series Manuale utente

Axis

Axis Q1614 Manuale utente

ieGeek

ieGeek DD201 Manuale utente

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuale utente

Vicon

Vicon V662-D-1 Istruzioni operative

Grundig

Grundig GCH-K0274P Manuale utente

Lorex

Lorex VANTAGE LBC7032 Manuale utente

4xem

4xem WPT Manuale utente

Samsung

Samsung SCV-3082 Manuale utente

Vitek

Vitek VTC-C544 Manuale utente