Ronix RH-4401 Manuale utente
SOCKET WELDING MACHINE
RH-4401
USER MANUAL 1
TECHNOLOGICAL DATA
Model RH-4401
Power 2000W
Frequency 50-60Hz
Voltage 220-240V
Surface Temperature 0°C , 300°C
Heating Tools Ф20, Ф 25, Ф 32, Ф 40mm
Temperature rising time <15min
Thermostat 16 Amp
Temperature 50°-300 °
PARTS LIST
Socket
Steel Body
Heating Board
Device Holder
Selector Light On & Off Switch
Handle
Cable
SOCKET FUSION
2
SAFETY INSTRUCTION
.GENERAL POWER TOOLS SAFETY WARNINGS
WARNING!
When using electric tools, basic sagety precautions, including the
following, should always be followed to reduce the risk of fire, electric
shock and personal injury. Read all these instructions before operating
this product and save these instructions.
.ELECTRICAL SAFETY
If the supply cord is damaged, it must be replaced by the manufacturer,
its service agent or similarly qualified persons in order to avoid a hazard.
.PERSONAL SAFETY
This appliance can be used by children aged from 8 years and above
and persons with reduced physical, sensory or mental capabilities or
lack of experience and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe way and understand
the hazards involved. Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by children without
supervision.
SAFETY WARNINGS FOR SOCKET FUSION
This product adopt two plug of European standard, please do not
change the plug, and must use the socket with the earth wire. In use
process, hand and combustibles can not touch electric melting part to
avoid accident.
Laypeople do not open the goods in order to avoid get an electric shock
and breaks the safe function of the instrument. If there has malfunctions
must be maintained by profession personnel or factory please do not
tear down optionally.
USER MANUAL 3
INSTRUCTIONS FOR USE
.INTENDED USE
This product is applicable to Connect the hot plastics material pipe,
such as PP-R, PE, PE-X. Our factory has following series of products:
Socket Fusion (800 We equip the 20mm, 25mm, 32mm, 40mm, 50mm,
63mm), (Socket Fusion 2000w equip the 20mm, 25mm, 32mm, 40mm,
50mm, 63mm welding adaptor). Socket Fusion (2500w We equip the
75mm,90mm 110mm).
.ASSEMBLY
Fix the welding device to the mold head, then put it into the hob, choose
the right mold head for different specification, wrench the whole machine
by hexagonal socket, generally smaller one at front bigger one at behind.
.SETTING UP
Plug in the machine (Please notice that the machine must be plugged
into electricity that has ground lead) and the red light will be on. When
the red light is on, it means that the machine enters the automatic
temperature control mode and you can begin to operate.
The temperature for the welding device has been adjusted, lay people
can not adjust, avoid to influence the machine’s normal usage and life
span.
Cut off the pipe vertically, push the pipe material and pipe piece to
the mold head. Press the watch to start operation. Dismantle the pipe
material and pipe piece is from the mold head at the same time after
reach the heating time, insert the need depth quickly, and the joint place
will be symmetrica.
NOTE
If operation environment is below 5oC, the heating time needs to be
prolonged 50%.
SOCKET FUSION
4
.NOTICE
1) If the red instruction light long hours do not appear to jump to
change, mean the instrument has malfunctions, should stop the work
immediately, and cut off the power supply.
2) The temperature for the welding device has been adjusted, lay people
cannot adjust, avoid to influence the machine’s normal usage and life
span.
of buy (expect mold head damage, artificial damage), and a free life time
service.
.MAINTENANCE AND SERVICE
We guarantee to keep this machine in good repair three months of date
of buy (expect mold head damage, artificial damage), and a free life time
service.
Ourter
Diametert
of Tubular
Produc (NM)
Welding depth
(NM)
Hating
time(s)
Processing
time (s)
Cooling
time (s)
16 12 4 4 3
20 14 5 4 3
25 16 7 4 3
32 18/1 8 4 4
40 20/5 12 6 4
50 23/5 18 6 5
63 27/4 24 6 6
75 31 30 10 8
90 35/5 40 10 8
110 41/5 50 15 10
USER MANUAL 5
Socket Socket
PipePipePipePipe
Heating Board Heating Board
Indice
Altri manuali Ronix Sistema di saldatura
