Ropox 4Single 50-47025 Manuale utente

TF 200.02.0040_ENG

4Single Battery

User manual

This manual must always accompany the product

TF 200.02.0040 / Date 22-05-2023

Page | 2 
TF 200.02.0040_ENG 
Table of Contents 
 
Symbols used in this manual.................................................................................................................. 3 
General safety........................................................................................................................................... 3 
General requirements .............................................................................................................................. 5 
1 Product information.................................................................................................................... 5 
2 Product description.................................................................................................................... 5 
3 Intended use.............................................................................................................................. 5 
4 Intended population ................................................................................................................... 6 
5 Intended operator ...................................................................................................................... 6 
6 Basic safety................................................................................................................................ 6 
Charging the battery ................................................................................................................................ 6 
1 Recharging procedure ............................................................................................................... 7 
2 Connection procedure ............................................................................................................... 7 
Mounting instructions.............................................................................................................................. 8 
1 Electrical component diagram ................................................................................................. 10 
2 Mounting the control ................................................................................................................ 10 
3 Testing..................................................................................................................................... 11 
3.1 Before testing the frame .................................................................................................. 11 
3.2 Testing the frame............................................................................................................. 11 
3.3 Testing the safety-strip .................................................................................................... 11 
Troubleshooting ..................................................................................................................................... 12 
Cleaning .................................................................................................................................................. 12 
Maintenance............................................................................................................................................ 13 
1 Periodic maintenance of the frame.......................................................................................... 13 
2 Periodic maintenance of the battery........................................................................................ 13 
Component part list................................................................................................................................ 13 
1 Accessories, component part list............................................................................................. 14 
Environmental protection...................................................................................................................... 15 
1 Packaging, transport, and storage....................................................................................... 15 
1.1 Packaging........................................................................................................................ 15 
1.2 Transport ......................................................................................................................... 15 
1.3 Storage............................................................................................................................ 15 
 

Page | 3

TF 200.02.0040_ENG

1. Symbols used in this manual

Warning Symbol

Indication of potentially hazardous situation. If not avoided, it can result in serious injury or

death.

Caution Symbol

Indication of potentially hazardous situation which may result in minor or moderate injury.

It may also be used to alert against unsafe practices.

Notice Symbol

This symbol is used to notify correct use and handling of the product.

2. General safety

This manual must be read and understood before use.

Always keep this manual in close proximity of the product.

The use, installation and service of this product must follow

this manual to avoid accidents and serious personal injury.

Never use or handle this product in other ways specified in

this manual as it can result in personal safety hazards and/or

cause damage to the product.

Anyone installing and/or using this product either as operator

or user should have the necessary safety information and

access to this manual.

If the supply cord is damaged, it must be replaced by the

manufacturer, its service agent, or similarly qualified

designated person to avoid a hazard.

Page | 4

TF 200.02.0040_ENG

Do not perform repairs, disassembly, or assembly operations,

add-ons, re-adjustments, or modification of the product

beyond what is described in this manual. These must be

carried out by Ropox or Ropox authorized personnel. Do not

perform service while in use.

This appliance can be used by children aged from 8 years

and above and people with reduced physical, sensory, or

mental capabilities, or lack of experience and knowledge if

they have been given supervision, or instruction concerning

use of the appliance in a safe way and understand the

hazards involved. Children shall not play with the appliance.

Cleaning and user maintenance shall not be made by

children without supervision.

Do not use the product if it has defects or has become

damaged before being repaired or replaced.

If the control box makes unusual noise, or smells, switch off

the mains voltage immediately.

Take care that the cables are not damaged.

Unplug the mains cable on mobile equipment before it is

moved.

The products must only be used in an environment that

corresponds to their IP protection. The products must not be

used in explosion hazard environments.

The information in this manual is based on correct installation

in accordance with installation instructions for this product.

Ropox cannot be held liable if the product is used in any way,

that differs from stated in this manual and/or installation

instruction.

Ropox reserve the right to amend this manual and reference

documents without prior notice.

Page | 5

TF 200.02.0040_ENG

3. General requirements

3.1 Product information

Manufacturer

Ropox A/S

Ringstedgade 221, DK-4700 Naestved

+45 55 75 05 00

E-mail: [email protected]

Product models

Part number

Model

Stroke length

50-47025

50-47026

Rapid stroke

Heavy load

300 mm / 11.8 in

Maximum load

150kg / 330 lbs. evenly distributed

Max. load includes weight of tabletop and other installations

Heavy load

250kg / 550 lbs. evenly distributed (accessory)

Operational capacity

Rapid stroke –30 lifts up/down

Heavy load –6 lifts up/down

Power supply

220-240V AC / 2A / 50-60Hz

Battery

Nominal voltage –24 VAC, discharge current –≤ 9A

Max charge voltage –40V DC, charge current –0.5A

Charger (Included)

Output –29.6V DC / 0.5A / 14.8W

Input –AC100-240V / 0.6A / 50/60Hz

Intermittence

Max. 10% = 2min active / 18min pause

Stroke length

300 mm / 11.8 in

IP-rating

Control box –IP20

Usage temperature

+5 °C to +40 °C

Storage temperature

+0 °C to +45 °C

Humidity

Max. 68% (non-condensing)

Materials

Steel and misc. plastic parts

Surface treatment

Powder coating: st. CWS 81283 RAL 7021 mat

3.2 Product description

4Single battery is an accessory to an electrically adjustable 4Single Frame. By using the battery accessory,

the 4Single Frame is freed from bothersome cables.

3.3 Intended use

The purpose of the product is to allow the 4Single Frame to be electrically adjusted to a seated or standing

user. This way, they’re able to use the table comfortably as a worktop. 4Single has a stroke length of 300mm

/ 11.8in.

By changing from fixed cabling to a battery, the 4Single achieves greater flexibility and becomes even more

transportable.

Page | 6

TF 200.02.0040_ENG

Button for

battery status

3.4 Intended population

Anyone who can find use in having a tabletop or workstation with an adjustable height.

3.5 Intended operator

Anyone who has read and understood this manual can use the product. However, children over the age of 8

may only use the product under the supervision of an adult.

3.6 Basic safety

A 4Single Frame can be bought with a safety-strip, which must be mounted on the fascias. This way,

collisions, and the danger of entrapment is reduced. It is always recommended to buy a safety-strip.

The safety-strip ensures that any collision with people or objects along the fascias are registered. When the

safety-strip registers something, it stops the table, and retracts by 1-2cm / 0.4-0.8in.

4. Charging the battery

Battery status can be checked by pressing the status-button. The LEDs will turn on, and the greater the

charge, the greater the number of LEDs will turn on.

Battery status

Battery status button is pressed.

LEDs light up for 3 seconds.

➢100 - 76% 4 LEDs on

➢75 - 51% 3 LEDs on

➢50 - 26% 2 LEDs on

➢25 - 1% 1 LED on

The battery should be charged about once every 14 days, depending on usage, with heavy loads and

frequent use typically requiring more frequent charging. It must be unplugged from the dock before it can be

charged with the charger.

A charger is included with the battery as standard, with the following properties:

➢4-pin Molex

➢29.6V DC / 0.5A / 14.8W

Warning!

Charging during a thunderstorm, or other power surges, you risk serious injury or

potentially death, due to electric shock.

Charging the battery with an incompatible charger can lead to serious injury or potentially

death, due to the fire hazard of overheating.

Page | 7

TF 200.02.0040_ENG

4.1 Recharging procedure

a) Unplug the battery from the docking bay.

b) Plug the charger into the battery. Check to see if the LEDs are on.

If the next LED starts to flash, the battery is recharging.

c) Wait 3½-4½ hours until all the 4 LEDs are on without flashing.

If you have any doubts whether the battery is fully charged, and 4 LEDs are on, unplug the charger.

d) Unplug the charger.

4.2 Connection procedure

After the battery has been removed from the docking bay, the following procedure should be followed, to

reinitiate the system.

a) Make sure that all the cables are connected, and that the safety-strip hasn’t been activated.

b) Plug the battery into the docking bay.

Page | 8

TF 200.02.0040_ENG

5. Mounting instructions

Page | 9

TF 200.02.0040_ENG

Page | 10

TF 200.02.0040_ENG

5.1 Electrical component diagram

The included cables must be mounted in accordance with the following diagram.

The safety strip can only be mounted if it has been chosen as an accessory. Otherwise, the control can be

mounted directly in the control box.

5.2 Mounting the control

a) Pull cable through hole in fascia and connect the control, via the control cable, to the control box

b) Carefully remove the protection paper, on the back of the press pad, while keeping your finger

between the cable-ribbon and the adhesive, as these mustn’t stick to each other

c) Place the press pad on the fascia

Notice!

If the cable-ribbon sticks to the adhesive, the control may be destroyed.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Ropox Accessori per fotocamere

Ropox

Ropox 4Single Series Manuale utente

Manuali Accessori per fotocamere popolari di altre marche

Viltrox

Viltrox EF-NEX Istruzioni per l'installazione

Calumet

Calumet 7100 Series CK7114 Manuale utente

Cambo

Cambo Wide DS Digital Series Istruzioni operative

Samsung

Samsung SHG-120 Manuale utente

Ryobi

Ryobi BPL-1820 Manuale operativo

Aegis

Aegis ABL-36020P Manuale utente

Pentax

Pentax Data Back Fc Manuale utente

Fantasea

Fantasea EyeGrabber F Series Manuale utente

Honeywell

Honeywell HDZ20HD Manuale utente

EGO

EGO BA1400T Manuale utente

Sima

Sima SRW-62 Manuale utente

Shape

Shape A7SSMKIT Manuale utente

Slide Kamera

Slide Kamera HST-2 Manuale utente

Power works

Power works 2902613 Manuale utente

SES

SES SE-2047-2 Manuale utente

Olympus

Olympus PT-EP05L Manuale utente

Starlite

Starlite OctoDome nxt Manuale utente

Custom Brackets

Custom Brackets Digital PRO-M Manuale utente