Rose electronics UltraVista 4K VWL-T222-4K-DVX Manuale utente
UltraVista 4K
UHD Video Wall Controller • 4K30
Installation
and
Operation Manual
10707 Stancliff Road
Houston, Texas 77099
Phone: (281) 933-7673
LIMITED WARRANTY
Copyright Rose Electronics 2016. All rights reserved.
No part of this manual may be reproduced, stored in a retrieval system, or transcribed in any form or any means, electronic or mechanical, including photocopying and
recording, without the prior written permission of Rose Electronics.
manual-ultravista-4k30-2016-03-17
Rose Electronics®warrants the UltraVista 4K to be in good working order for one year from the date of
purchase from Rose Electronics or an authorized dealer. Should this product fail to be in good working order at
any time during this one-year warranty period, Rose Electronics will, at its option, repair or replace the Unit as
set forth below. Repair parts and replacement units will be either reconditioned or new. All replaced parts
become the property of Rose Electronics. This limited warranty does not include service to repair damage to
the Unit resulting from accident, disaster, abuse, or unauthorized modification of the Unit, including static
discharge and power surges.
Limited Warranty service may be obtained by delivering this unit during the one-year warranty period to Rose
Electronics or an authorized repair center providing a proof of purchase date. If this Unit is delivered by mail,
you agree to insure the Unit or assume the risk of loss or damage in transit, to prepay shipping charges to the
warranty service location, and to use the original shipping container or its equivalent. You must call for a return
authorization number first. Under no circumstances will a unit be accepted without a return authorization
number. Contact an authorized repair center or Rose Electronics for further information.
ALL EXPRESS AND IMPLIED WARRANTIES FOR THIS PRODUCT INCLUDING THE WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO A
PERIOD OF ONE YEAR FROM THE DATE OF PURCHASE, AND NO WARRANTIES, WHETHER EXPRESS
OR IMPLIED, WILL APPLY AFTER THIS PERIOD. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW
LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU.
IF THIS PRODUCT IS NOT IN GOOD WORKING ORDER AS WARRANTIED ABOVE, YOUR SOLE
REMEDY SHALL BE REPLACEMENT OR REPAIR AS PROVIDED ABOVE. IN NO EVENT WILL ROSE
ELECTRONICS BE LIABLE TO YOU FOR ANY DAMAGES INCLUDING ANY LOST PROFITS, LOST
SAVINGS OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF OR
THE INABILITY TO USE SUCH PRODUCT, EVEN IF ROSE ELECTRONICS OR AN AUTHORIZED DEALER
HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, OR FOR ANY CLAIM BY ANY OTHER
PARTY.
SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES FOR CONSUMER PRODUCTS, SO THE ABOVE MAY NOT APPLY TO YOU.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS
WHICH MAY VARY FROM STATE TO STATE.
DECLARATIONS OF CONFORMITY
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to
Subpart J of Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be required to correct the interference at
his own expense.
TABLE OF CONTENTS
Contents
Disclaimer 1
System Introduction 1
Features 1
Package Contents 2
Sample Application 3
Video Input Resolution for Models 3
UltraVista 4K Models 4
Model View 4
Front Views 4
Front View Connectors / Indicators 5
Rear View 6
Rear View Connectors /Indicators 6
Installation 7
Connections to the UltraVista 4K 7
Software Installation 8
UltraVista 4K Operation 11
Connection between Smart Editor and UltraVista 4K Unit 11
Connecting To and Disconnecting From the Unit(s) 11
Changing the IP of the Unit 12
Configuring the Video Wall 13
Screen Setup Area 13
Adjusting the Screens 16
Auxiliary Tools 17
Windowing Operations 18
Opening a Window 18
Closing a Window 18
Zooming a Window 18
Scrolling a Window 18
Cascading the UltraVista 4K 19
Safety 20
Maintenance and Repair 21
Technical Support 21
Figures
Figure 1. UltraVista 4K – Cascaded Video Wall displaying 1920x1080 on all monitors 3
Figure 2. UltraVista 4K Model View 4
Figure 3. Front View HDMI Model 4
Figure 4. Front View Dual-Link DVI Model 4
Figure 5. Front View DisplayPort Model 4
Figure 6. All models Rear View 6
Figure 7. Network Connections LAN Properties 7
Figure 8. Setting a Fixed IP address 8
Figure 9. Software Installation License Agreement 8
Figure 10. Software Installation Select Options Screen 9
Figure 11. Software Installation Select Destination Folder Screen 9
Figure 12. Software Installation Progress Screen 9
Figure 13. Smart Editor Desktop Icon 10
Figure 14. Smart Editor Main Screen 10
Figure 15. Connect to Units Screen 11
Figure 16. Change Device IP menu 12
Figure 17. Change Device IP Address Screen 12
Figure 18. Output Settings Main Screen 13
Figure 19. Output Screen Resolutions 13
Figure 20. Output Resolutions Advanced Timing 14
Figure 21. Output Screen Wall Configuration 14
Figure 22. Output Configuring the Video Wall 15
Figure 23. Output Dot Pitch and Bezel Compensation Settings 15
Figure 24. Output Screen Adjustment 16
Figure 25. Output Auxiliary Tools 17
Figure 26. Input Main Interface 18
Figure 27. Cascading Change Device Mode Window 19
Tables
Table 1. Supported Video Resolutions 3
Table 2. UltraVista 4K Specifications 22
Table 3. UltraVista 4K Part Numbers 22
Appendices
Appendix A - Specifications 22
Appendix B - Part Numbers 22
INTRODUCTION
UltraVista 4K Manual 1
Disclaimer
While every precaution has been taken in the preparation of this manual, the manufacturer assumes no
responsibility for errors or omissions. Neither does the manufacturer assume any liability for damages resulting
from the use of the information contained herein. The manufacturer reserves the right to change the
specifications, functions, circuitry of the product, and manual content at any time without notice.
The manufacturer cannot accept liability for damages due to misuse of the product or other circumstances
outside the manufacturer’s control. The manufacturer will not be responsible for any loss, damage, or injury
arising directly or indirectly from the use of this product. (See limited warranty.)
System Introduction
Thank you for choosing the UltraVista 4K. The UltraVista 4K is the result of Rose Electronics commitment to
providing state-of-the-art solutions for today’s demanding workplace. The UltraVista 4K Video Wall functions as
a tool to create and manage multiple screen video displays.
The UltraVista 4K is a comprehensive display wall processor. Single input signals are flexibly displayed on four
output displays. Each of these outputs may be DVI or VGA. The input image can be cropped to show any part
of it on an output display.Each display output can also be individually mirrored or rotated by 90°, 180° or 270°
to generate a mix of portrait and landscape oriented displays.
The UltraVista 4K is available in six models. Each model accepts one of three high-resolution video input
options: dual channel DVI, HDMI 1.4, or DisplayPort. The use of 4K resolution video inputs helps ensure
crystal-clear HD output to four DVI displays. Each video input model is available as a standalone unit or one
which supports cascading multiple units.
Features
■Supports one of three input types – dual-channel DVI, HDMI 1.4 or DisplayPort
■Three base models and three cascadable models, each supporting one of the input types
■Input resolutions up to 3840 x 2160 @ 30 Hz
■Four Full HD DVI video outputs with resolutions to 1920 x 1080 @ 60 Hz
■Each display output can be individually rotated or mirrored, for a mix of portrait and landscape oriented
displays
■Bezel compensation and overlap creation for edge blending
■Frame locking between cascaded units ensures a perfectly synchronized video wall
■Windows based software allows simple configuration control via IP or RS-232 connection
■EDID management provides for non-standard input resolutions
UltraVista 4K Manual 2
Package Contents
The package contents consist of the following:
■The UltraVista 4K unit as ordered
■1 x 12V Power Supply
■SmartEditor Software
■Manual
Additional cables are usually ordered separately. If the package contents are not correct, contact Rose
Electronics or your reseller so the problem can be quickly resolved.
SYSTEM OVERVIEW
UltraVista 4K Manual 3
Sample Application
Figure 1. UltraVista 4K – Cascaded Video Wall displaying 1920x1080 on all monitors
Video Input Resolution for Models
\
Video Input Supported Resolutions
Dual-Link DVI 4096*2160@30Hz, 3840*2400@30Hz, 3840*2160@30Hz, 1920*2160@60Hz, 2560*1600@60Hz.
HDMI 4096*2160@30Hz, 3840*2400@25Hz, 3840*2160@30Hz, 3840*2160@25Hz,
2560*1600@60Hz, 1920*2160@60Hz, 1920*2160@50Hz
DisplayPort 3840*2400@30Hz, 3840*2160@30Hz, 2560*1600@60Hz
Table 1. Supported Video Resolutions
MODELS
UltraVista 4K Manual 4
UltraVista 4K Models
Model View
Figure 2. UltraVista 4K Model View
Front Views
The UltraVista 4K comes in models with different input video options - dual-channel DVI, HDMI 1.4 and
DisplayPort. Each of these is displayed below.
Figure 3. Front View HDMI Model
Figure 4. Front View Dual-Link DVI Model
Figure 5. Front View DisplayPort Model
UltraVista 4K Manual 5
Front View Connectors / Indicators
HDMI 4K input interface - the LED to the right of the connector glows dimly when a HDMI
signal is detected
Dual-Link DVI input interface - the LEDs to the left of the connector glow when dual-link
video is detected
DisplayPort input interface - the LED to the left of the connector is always lit
RS-232 serial connector - Parameters: Baud Rate:9600, Data Bit: 8, Stop Bit: 0, Check Bit
1
RJ-45 connector for TCP/IP interface
Status Indicator LEDs – they all light up when power is applied to the unit; if the unit is
functioning normally, the lower left LED stays lit and the others turn off
Power barrel jack connector – 12V, 3.3A
Each UltraVista 4K unit accepts one input-signal source. This input-signal source opens a window on the
whole output splicing screen described below.
Questo manuale è adatto per i seguenti modelli
5
Indice
Altri manuali Rose electronics Controllori
