Rose electronics CrystalLink CLK-4U2FMB-500M Manuale utente

CrystalLink USB

2.0 Fiber

USB2.0

Fiber Optic Extender

Installation

and

Operation Manual

10707 Stancliff Road

Houston, Texas 77099

Phone: (281) 933-7673

[email protected]

LIMITED WARRANTY

No part of this manual may be reproduced, stored in a retrieval system, or transcribed in any form or any means, electronic or mechanical, including photocopying and

recording, without the prior written permission of Rose Electronics.

manual-crystallink-usb2.0-fiber-revb-2018-03-25

Rose Electronics®warrants the CrystalLink USB2.0 Fiber Extender to be in good working order for one year

from the date of purchase from Rose Electronics or an authorized dealer. Should this product fail to be in good

working order at any time during this one-year warranty period, Rose Electronics will, at its option, repair or

replace the Unit as set forth below. Repair parts and replacement units will be either reconditioned or new. All

replaced parts become the property of Rose Electronics. This limited warranty does not include service to

repair damage to the Unit resulting from accident, disaster, abuse, or unauthorized modification of the Unit,

including static discharge and power surges.

Limited Warranty service may be obtained by delivering this unit during the one-year warranty period to Rose

Electronics or an authorized repair center providing a proof of purchase date. If this Unit is delivered by mail,

you agree to insure the Unit or assume the risk of loss or damage in transit, to prepay shipping charges to the

warranty service location, and to use the original shipping container or its equivalent. You must call for a return

authorization number first. Under no circumstances will a unit be accepted without a return authorization

number. Contact an authorized repair center or Rose Electronics for further information.

ALL EXPRESS AND IMPLIED WARRANTIES FOR THIS PRODUCT INCLUDING THE WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO A

PERIOD OF ONE YEAR FROM THE DATE OF PURCHASE, AND NO WARRANTIES, WHETHER EXPRESS

OR IMPLIED, WILL APPLY AFTER THIS PERIOD. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW

LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU.

IF THIS PRODUCT IS NOT IN GOOD WORKING ORDER AS WARRANTIED ABOVE, YOUR SOLE

REMEDY SHALL BE REPLACEMENT OR REPAIR AS PROVIDED ABOVE. IN NO EVENT WILL ROSE

ELECTRONICS BE LIABLE TO YOU FOR ANY DAMAGES INCLUDING ANY LOST PROFITS, LOST

SAVINGS OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF OR

THE INABILITY TO USE SUCH PRODUCT, EVEN IF ROSE ELECTRONICS OR AN AUTHORIZED DEALER

HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, OR FOR ANY CLAIM BY ANY OTHER

PARTY.

SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR

CONSEQUENTIAL DAMAGES FOR CONSUMER PRODUCTS, SO THE ABOVE MAY NOT APPLY TO YOU.

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS

WHICH MAY VARY FROM STATE TO STATE.

DECLARATIONS OF CONFORMITY

This is to certify that, when installed and used according to the instructions in this manual, the units listed and

described here are shielded against the generation of radio interferences in accordance with the application of

Council Directives 2014/30/EU and 2014/30/EU, as well as these standards:

■EN 55022: 2010/AC:2011 (Class B)

■EN 55024:2010 + A1:2015

■EN 61000

This equipment has been found to comply with the limits for a Class A digital device, pursuant to Part 15 of the

FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the

equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a residential area is likely to cause

harmful interference in which case the user will be required to correct the interference at their own expense.

The product safety of the devices is proven by their compliance with the following standards:

■CAN/CSA-ICES-003 Class B

The manufacturer complies with the EU Directive 2012/19/EU on the prevention of waste electrical and

electronic equipment (WEEE). The device labels carry a respective marking.

These devices comply with Directive 2011/65/EU of the European Parliament and of the council of 8 June

2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment

(RoHS 2, RoHS II). The device labels carry a respective marking.

TABLE OF CONTENTS

Contents

Disclaimer 1

System Introduction 1

Features 1

Package Contents 2

Additional Items Required 2

Application Examples 2

CrystalLink USB2.0 Fiber Models 3

Transmitter Unit 3

Receiver Unit 4

Installation Procedure 6

Installation Using Premise Wiring 6

Installing the Transmitter Unit 6

Installing the Receiver Unit 6

Connecting the Transmitter to Receiver 7

Connection Using Surface Cabling 7

Connection Using Premise Cabling 7

Connecting a USB Device 7

Checking the Installation 7

Compatibility 7

Transmitter and Receiver Mounting Options 8

Option 1: CrystalLink USB2.0 Fiber Extender Mounting Bracket Kit 8

Option 2: CrystalLink USB2.0 Fiber Extender Mounting Plate 8

Troubleshooting Guide 9

Safety 11

Maintenance and Repair 12

Technical Support 12

Figures

Figure 1. CrystalLink USB2.0 fiber extender – front and back panels 2

Figure 2. Transmitter unit – LED’s and connectors 4

Figure 3. Receiver unit – LED’s and connectors 5

Figure 4. CrystalLink USB2.0 fiber extender – standard installation 6

Figure 5. Chassis mounting options 8

Figure 6. Fiber cable termination (Duplex LC) 14

Tables

Table 1. Troubleshooting procedures ............................................................................................. 10

Appendices

Appendix A —Specifications 13

Appendix B —Fiber Cable Termination 14

INTRODUCTION

CrystalLink USB2.0 Fiber Extender Manual 1

Disclaimer

While every precaution has been taken in the preparation of this manual, the manufacturer assumes no

responsibility for errors or omissions. Neither does the manufacturer assume any liability for damages resulting

from the use of the information contained herein. The manufacturer reserves the right to change the

specifications, functions, circuitry of the product, and manual content at any time without notice.

The manufacturer cannot accept liability for damages due to misuse of the product or other circumstances

outside the manufacturer’s control. The manufacturer will not be responsible for any loss, damage, or injury

arising directly or indirectly from the use of this product (See limited warranty).

System Introduction

Thank you for choosing the Rose Electronics CrystalLink USB2.0 fiber extender.

The CrystalLink USB2.0 fiber has proven to be a valuable investment for any business, big or small, that has a

need to access and extend their USB1.1 or 2.0 peripherals up to 6.2 miles (10Km) from a remote location.

The receiver unit’s USB ports connect to your USB peripherals. The number of peripherals can be increased

by using a standard USB hub.

The USB peripherals can be USB1.1 devices (low-speed or full-speed) or USB2.0 high-speed devices

operating up to 480 Mb/s. The receiver unit can supply up to 1 Amp per USB port for driving high-power USB

devices.

Plug-and-play installation makes the product simple and easy to use. Connect the transmitter to the computers

USB port, connect the USB ports on the receiver to your USB devices, connect the transmitter to the receiver

with up to 6.2 miles of industry standard fiber cable and power on the system.

Note:

All references to fiber optic cable distances in this user manual are as follows;

Multimode fiber: Up to 1,640ft (500m) over multimode OM2 fiber or up to 902ft (275m) over OM1 multimode

fiber

Singlemode fiber: Up to 10km (6.2 miles) over singlemode fiber

The instructions in this manual assume a general knowledge of computer installation procedures, familiarity

with cabling requirements, and some understanding of USB device operation.

Features

■Supports transparent extension of USB 2.0 (high-speed) and USB 1.1 (low and full speed) devices

■Extends USB devices up to 6.2 miles (10Km) over fiber cable

■Four-port integrated USB2.0 hub on the receiver unit

■Standard USB hubs can be used to increase the number of connected devices up to 30.

■USB3.0 devices will work at USB2.0 speeds through the extender

■Up to 1 Amp of power is available at each USB port for high-powered USB devices

■Electrical isolation for data integrity

■Plug-and-Play installation, no configuration or set-up needed

■Operating system independent and supports all major operating systems

CrystalLink USB2.0 Fiber Extender Manual 2

Package Contents

The package contents consist of the following:

■Transmitter unit

■Receiver unit

■USB2.0 cable

■24V DC Power Adapter (1) and AC power cable (1)

■Manual

Additional Items Required

■USB compatible computer (host computer) with a USB compliant operating system

■USB compatible device(s) for remote-end connection

■Fiber optic cabling

■Two strands of multimode or singlemode fiber are required to support the extender connection. The cabling

must provide a duplex connection with crossover and must be terminated with Duplex LC connectors at

both ends.

Application Examples

The CrystalLink USB2.0 fiber extender is ideal for use with any USB2.0 device in an office, computer room or

industrial environment where USB devices need to be connected remotely from a host PC.

■Industrial control

■Interactive whiteboard

■Medical applications

■USB extension in hazardous operating environments

■Sensor or data acquisition

■Extension of multiple USB devices including hard drivers, printer, scanner, camera control, touchscreens

Figure 1. CrystalLink USB2.0 fiber extender – front and back panels

MODELS

CrystalLink USB2.0 Fiber Extender Manual 3

CrystalLink USB2.0 Fiber Models

The CrystalLink USB2.0 fiber enables users to extend beyond the standard 15ft (5.0 meter) cable limit for USB

peripherals by locating high-speed USB device(s) up to 6.2 miles (10Km) from the computer.

Transmitter Unit

The transmitter connects to the host device using the supplied USB cable. Power for the transmitter is provided

by the host computer. Power and status LED’s are conveniently located on the front panel for user reference.

Transmitter unit – front panel view

Transmitter unit – rear panel view

Item Type Description

Power LED (Blue) LED turns on when power is supplied.

LED is off when no power is supplied by the host computer.

Link LED (Green)

Indicates a valid USB link is established between the local and remote

extenders.

LED turns on when link between local and remote extender is established.

LED is off when there is no link between local and remote extenders.

LED is slow blinking when the unit is attempting to establish a link

Host LED (Green) LED turns on when the extender system is properly enumerated on the

host computer.

LED blinks when in a suspended state.

Activity LED (Amber)

Indicates data transmission is occurring between local and remote

extenders.

LED blinks intermittently with or without a USB device connected. When

the local and remote extenders are in suspend mode, the LED is off.

CrystalLink USB2.0 Fiber Extender Manual 4

2 Config Reserved for engineering use

3 USB Host Port Used to connect the

local extender unit to the host computer. Accepts Type

B connector into the local extender unit.

4 Mode Reserved for engineering use

5 Link Port (Duplex LC) Extension link Duplex LC fiber connection

Figure 2. Transmitter unit – LED’s and connectors

Receiver Unit

The receiver has four USB Type-A ports for connecting up to four USB devices. Additional devices may be

connected by attaching a USB hub to the receiver unit. The receiver is powered directly by the included 24V

power supply, delivering 600mA of current per USB port.

Receiver unit – front panel view

Receiver unit – rear panel view

Item Type Description

1 USB Device Ports Accepts USB device(s) using Type A connectors

Power LED (Blue) LED turns on when power is supplied, off when no power is supplied.

Link LED (Green)

Indicates a valid USB link is established between the local and remote

extenders.

LED turns on when link between local and remote extenders is established.

LED is off when there is no link between local and remote extenders.

Host LED (Green) Indicates that the RG2304 system is properly enumerated on the host

computer. The LED blinks when in a suspended state.

Activity LED (Amber)

Indicates data transmission is occurring between local and remote

extenders. LED blinks intermittently with or without a USB device

connected. When the local and remote extenders are in suspend mode,

the LED is off.

CrystalLink USB2.0 Fiber Extender Manual 5

3 DC Power Port Connects to the AC power supply. Required at the remote extender for

proper operation.

4 Config Reserved for manufacturer use.

5 Mode Reserved for manufacturer use.

6 Link Port (Duplex LC) Extension link Duplex LC fiber connection

Figure 3. Receiver unit – LED’s and connectors

INSTALLATION

CrystalLink USB2.0 Fiber Extender Manual 6

Installation Procedure

Before beginning an installation, ensure you have all products and components ready for the installation

Figure 4. CrystalLink USB2.0 fiber extender – standard installation



Determine where the computer is to be located and set up the computer.



Determine where you want to locate the remote USB device(s).



Remember the product supports a maximum distance of 6.2 miles (10Km) for transparent USB devices.

If using patch (stranded) cables or premise wiring, the achievable extension distance may be less.



Avoid potential sources of interference such as electrical wiring, fluorescent lighting and radio

communications equipment.

Ensure that the fiber cable is terminated with Duplex LC type matching connectors. Two strands of multimode

fiber cabling are required for the multimode extender up to 1,640ft (500m) using 50/125μm or up to 902ft

(275m) using 62.5/125μm fiber optic cable.

Installation Using Premise Wiring

If you are using premise cabling, ensure fiber cabling is installed between the two locations, with fiber premise

outlets located near both the computer and the USB devices.

Installing the Transmitter Unit



Place the transmitter unit near the computer.



Install the supplied USB cable between the transmitter and USB port on the host computer.

Installing the Receiver Unit

Place the receiver unit near the USB device(s) in the desired remote location.

USB Host

TX Unit

RX Unit

Fiber Cable

USB2.0

Devices

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Rose electronics Estensione

Rose electronics

Rose electronics CrystalLink USB2.0 CATx Manuale utente

Rose electronics

Rose electronics CRK-1USB Manuale utente

Rose electronics

Rose electronics CrystalView fiber CRK-1DFM/SUN Manuale utente

Rose electronics

Rose electronics CrystalView EX HDMI Multi CRV-SRDTXT2D-2T-HD6... Manuale utente

Rose electronics

Rose electronics CrystalView CAT5 Rack CRV-12SLP Manuale utente

Rose electronics

Rose electronics CrystalView CrystalView TWISTED PAIR KVM... Manuale utente

Rose electronics

Rose electronics CRK-2DTPPDVI Manuale utente

Rose electronics

Rose electronics CLK-4U2TP-100M Manuale utente

Rose electronics

Rose electronics CrystalView DVI EX Manuale utente

Rose electronics

Rose electronics CrystalView CAB-MD6M2MD6F Manuale utente

Rose electronics

Rose electronics CLK-4U2FM-500M Manuale utente

Rose electronics

Rose electronics CrystalView HDT Manuale utente

Rose electronics

Rose electronics CRK-1P1V Manuale utente

Rose electronics

Rose electronics ORION Manuale utente

Rose electronics

Rose electronics CrystalView DVI CATx CRK-2DTXPD1D Manuale utente

Rose electronics

Rose electronics CrystalView fiber CRK-1DFM/SUN Manuale utente

Rose electronics

Rose electronics CATx Manuale utente

Rose electronics

Rose electronics CrystalView Manuale utente

Rose electronics

Rose electronics XtendVue Manuale utente

Rose electronics

Rose electronics CrystalLink USB3.1 Fiber Dual Port Manuale utente

Rose electronics

Rose electronics AUTO EQUALIZATION Manuale utente

Rose electronics

Rose electronics CRK-1DFMPDVI/SF Manuale utente

Rose electronics

Rose electronics CRYSTALVIEW USB 1.1 Manuale utente

Rose electronics

Rose electronics CrystalView DVI EX Manuale utente

Manuali Estensione popolari di altre marche

SY HDBT-60T Manuale utente

Appsys ProAudio

Appsys ProAudio ADX-16 Manuale utente

Atlona

Atlona RS232 Manuale utente

IDK

IDK OPF-TH1000-A Manuale utente

Enable-IT

Enable-IT 824WP Manuale utente

Worx

Worx Landroid RadioLink WA0864 Scheda tecnica

TP-Link

TP-Link TL-WA730RE Manuale utente

Camplex

Camplex CMX-HDMI-SFPL Manuale utente

SC&T

SC&T HE03-4K Manuale utente

Marmitek

Marmitek MegaView70 Manuale utente

Samsung

Samsung SCS-26UC4 Manuale utente

Foxun

Foxun SX-GES24 Manuale utente

MuxLab

MuxLab 500771 Manuale utente

foxunhd

foxunhd SX-AEX01 Manuale utente

TERK Technologies

TERK Technologies LFIRX2 Manuale utente

Devolo

Devolo Audio Extender Manuale

Edimax

Edimax EW-7438RPn V2 Manuale utente

Shinybow USA

Shinybow USA SB-6335T5 Manuale utente