Rose electronics CrystalView USB2 Manuale utente

Using the CD

Insert the provided CD

and the Product

Document selection

window will

automatically display.

Select the product and

the Manual, DataSheet,

and QuickStart

document window will

display. Select the

document to display or

print. Documents are

in PDF format.

The CrystalView USB2 is a very versatile CATx extender. Single, dual, and

quad video and up to four USB devices can be extended up to 150 feet from

the controlling computer. A standard USB hub can be connected to increase

the number of USB devices. All video signals are automatically adjusted for

equalization, gain, and skew (optional). The CATx cable length is calculated

and the video automatically adjusted for a crystal clear display regardless of the

CATx cable type or cable length.

Connecting the Cables

Depending on

your model,

cables and

rear panel

connectors will

vary. Dual and

Quad models

connect with

additional video

cables and

CAT5 cables.

Installation

It is recommended that the following installation procedure be followed to

assure proper cable connections, power up sequencing, and accurate monitor

DDC table information is obtained from the connected video monitors. Also all

equipment should be powered off until all cabling is connected.

The above figure shows a typical configuration using the single video model.

The dual and quad video models are installed and configured in the same

manor with 2 or 4 PC video ports connected to the transmitter unit and 2 or 4

video monitors connected to the receiver unit.

Single, Dual or Quad video <<< USB Devices >>>

Cabling



Connect a CAT5 cable from the transmitter’s RJ45 Link connector to the

receiver’s RJ45 Link connector.



Connect CAT5 cables from the transmitter’s USB (1-4) RJ45 connectors to

the receiver’s USB (1-4) RJ45 connectors.



Connect the power adapters to the transmitter and receiver

(Do not apply power at this time)

First time power up sequence

The first time the system is powered up or a monitor is changed, the below

power up sequence should be followed

1. Turn on all video monitors

2. Apply power to the CrystalView USB2 Receiver

3. Apply power to the CrystalView USB2 Transmitter

4. Boot the PCs

5. Turn on all USB devices

Operating instructions- All models

Operation of your system is no different than having your keyboard, monitor,

mouse and USB devices connected directly to a PC. The only difference is

they can be up to 150 feet away. You can operate your system normally,

programs can be executed, maintenance can be performed, and any operation

normally performed can be done with no derogation in video quality and

performance.

The video signal on all models can be fine tuned using simple keyboard

commands. This is normally not needed but sometimes cable routing and

patch panels can degrade the video signal. Next to each video in port (HD15M)

on the transmitter there is a USB Type A port labeled AUX/KBD. To execute

the keyboard commands, connect a USB keyboard to the appropriate

AUX/KBD port. The AUX/KBD port is for video adjustments only. Once the

video has been adjusted perform the keyboard command Left Ctrl, Left Shift, k

to save the information.

Keyboard Commands

Command

Description

Left Ctrl, Left Shift, e:

Perform a cable length measurement

Left Ctrl, Left Shift, keyboard +:

Increase the video gain by 1

Left Ctrl, Left Shift, keyboard -:

Decrease the video gain by 1.

Left Ctrl, Left Shift, keypad +:

increase the video equalization by 1

Left Ctrl, Left Shift, keypad -:

Decrease the video equalization by 1

Left Ctrl, Left Shift, k

Saves any changes made

10707 Stancliff Road Phone: (281) 933-7673

Houston, Texas 77099 WWW.ROSE.COM

Altri manuali per CrystalView USB2

Altri manuali Rose electronics Estensione

Rose electronics

Rose electronics Xcion DVI/VGA over CATx Manuale utente

Rose electronics

Rose electronics CrystalLink CLK-4U2FMB-500M Manuale utente

Rose electronics

Rose electronics CrystalView Exact Manuale utente

Rose electronics

Rose electronics CRK-1USB Manuale utente

Rose electronics

Rose electronics Cybernetech CLK-2U2TP-100M Manuale utente

Rose electronics

Rose electronics CRK-2DTPPDVI Manuale utente

Rose electronics

Rose electronics CrystalView DVI EX Manuale utente

Rose electronics

Rose electronics CrystalLink USB3.1 Fiber Dual Port Manuale utente

Rose electronics

Rose electronics CrystalView DVI Fiber CRK-2DFMPD1D Manuale utente

Rose electronics

Rose electronics CATx Manuale utente

Rose electronics

Rose electronics CrystalView DVI Fiber CRK-2DFMPD1D Manuale utente

Rose electronics

Rose electronics CrystalView DVI Mini Manuale utente

Rose electronics

Rose electronics CrystalView Rack CRV-12SLP Manuale del proprietario

Rose electronics

Rose electronics CrystalView EX HDMI Multi CRV-SRDTXT2D-2T-HD6... Manuale utente

Rose electronics

Rose electronics CrystalView HDT Manuale utente

Rose electronics

Rose electronics CrystalView DVI CAT Series Manuale utente

Rose electronics

Rose electronics ViewLink Coax Manuale utente

Rose electronics

Rose electronics CrystalView Mini Manuale utente

Rose electronics

Rose electronics PS/2 Manuale utente

Rose electronics

Rose electronics CrystalView fiber CRK-1DFM/SUN Manuale utente

Rose electronics

Rose electronics RJ45 Manuale utente

Rose electronics

Rose electronics CrystalView CRK-1DTXT-HD5 Manuale utente

Rose electronics

Rose electronics CrystalView DVI EX Manuale utente

Rose electronics

Rose electronics CrystalView Plus Manuale utente

Manuali Estensione popolari di altre marche

SY HDBT-60T Manuale utente

Appsys ProAudio

Appsys ProAudio ADX-16 Manuale utente

Atlona

Atlona RS232 Manuale utente

IDK

IDK OPF-TH1000-A Manuale utente

Enable-IT

Enable-IT 824WP Manuale utente

Worx

Worx Landroid RadioLink WA0864 Scheda tecnica

TP-Link

TP-Link TL-WA730RE Manuale utente

Camplex

Camplex CMX-HDMI-SFPL Manuale utente

SC&T

SC&T HE03-4K Manuale utente

Marmitek

Marmitek MegaView70 Manuale utente

Samsung

Samsung SCS-26UC4 Manuale utente

Foxun

Foxun SX-GES24 Manuale utente

MuxLab

MuxLab 500771 Manuale utente

foxunhd

foxunhd SX-AEX01 Manuale utente

TERK Technologies

TERK Technologies LFIRX2 Manuale utente

Devolo

Devolo Audio Extender Manuale

Edimax

Edimax EW-7438RPn V2 Manuale utente

Shinybow USA

Shinybow USA SB-6335T5 Manuale utente