Rosewill RC-304 Manuale utente

2 ports Parallel PCI card RC304

User Manual

2 ports Parallel PCI card RC304 User Manual

Overview

This PCI card is a dual 1284 parallel port controller with PCI bus interface and supports the existing

contronics printer interface as well as PS2, EPP & ECP modes and uses an all-in-one solution from

NeMos Technology, which provides superior performance and unmatched data transfer rates. The

most advanced feature is it uses of a single interrupt, which is set automatically by the host system

and share among all on-board I/O ports.

Features

yChipset: NetMos Nm 9715

yData Transfer Rate: 1.5Mbytes/s(parallel port)

yBus: 32bit, 33MHz.

yLow power: Single 5V operation

yHigh speed transfer, Dual parallel port

yMulti-mode compatible controller (SPP, PS2, EPP &ECP)

y16Byte FIFO (parallel)

ySoftware programmable mode selects

ySupports Window98, Window95, Window2000 & Window NT 4.0

Installing the PCI I/O controller card into your computer

1. Turn off your computer and all external devices connect it.

2. Disconnect your computer from the power sources.

3. Open the computer case. Refer to your computer user manual for more details.

4. Find an available PCI slot and remove the slot bracket. Save the bracket screw for later use.

5. Align the PCI I/O controller horizontally with respect to the PCI slot and insert it into the slot firmly

and evenly. Take care not to force it into the slot. Once you have properly positioned the PCI I/O

controller card into the slot, fasten it to the computer case with the bracket screw you have saved.

6. Close the computer case. Make sure to reconnect all the external devices power cords to your

computer.

2 ports Parallel PCI card RC304 User Manual

Driver Installation

Windows 95/98/2000

Once the PCI I/O card is installed and the computer is restarted, Windows will detect the board and

attempt to install driver for it.

1. Start Windows 95/98/2000

2. The“Update Device driver Wizard” will

appear, informing you that it has found a “PCI

I/O Card”. Click the “Next” button.

3. Click “Other Location” for Windows 95 or

“Specify a location” for Windows 98 to

install the driver.

2 ports Parallel PCI card RC304 User Manual

4. Insert the driver CD in CD-ROM drive(D) and

click on the “Browse” button.

5. at the “Browse” option, select “CD-ROM(D)

FOLDER “PCI_I/O\NM97X5\WIN9X”

“OK”button

6. The “Update Device Driver Wizard” will

appear, informing you that it has found the

“NetMos PCI I/O Card” driver. Click the

“Next” button.

7. Follow the instructions to finish up the drive

installation.

8. Once Windows 9x has restarted, you can now

connect your external devices to the PCI I/O

card install the driver for the external devices,

please refer to the external device user

manual.

2 ports Parallel PCI card RC304 User Manual

Windows NT 4.0

Using the existing hard disk controller in your system, you need to install the ATA/100 driver into

Windows NT first. Without ATA/100 driver support, hard drive attached to the ATA/100 IDE controller

card can not boot up Windows NT.

Installing drivers with existing Windows NT 4.0:

Make sure Windows NT 4.0 is properly installed into your system first.

Step 1: Start Windows NT 4.0.

Step 2: Insert Driver CD into the CD-ROM drive.

Step 3: Select “Run” option in Windows NT.

Step 4: At the “Run” option, click on the “Browse” button.

Step 5: At the Browse for Folder window:

1. Select “CD-ROM Drive (D)”

2. Select NetMosMultiIODrivers.exe

3. Click on the Open button

Step 6: Finally, click the “OK” button

Step 7: Follow the instruction to finish the driver installation. Your system will automatically restart in

order to complete the driver installation.

Installing DOS Driver

Copy “D:\PCI_IO\NM97X5\DOS\NMDOSIN.EXE ” to your hard disk and run it.

Thank you for purchasing a quality Rosewill Product.

Please register your product at : www.rosewill.com/ for complete warranty information and future support for

your product.

Indice

Altri manuali Rosewill Scheda PCI

Rosewill

Rosewill RNWD?N9003PCE Manuale utente

Rosewill

Rosewill SATA 150 RAID 2 Port PCI Host RC201 Manuale utente

Rosewill

Rosewill RC210 Manuale utente

Rosewill

Rosewill RC-209 Manuale utente

Rosewill

Rosewill RC-400 Manuale utente

Rosewill

Rosewill RC-305 Manuale utente

Rosewill

Rosewill RC-401 Manuale utente

Rosewill

Rosewill RC-302E Manuale utente

Rosewill

Rosewill RNX-N150PCe Manuale utente

Rosewill

Rosewill RC-510 Manuale utente

Rosewill

Rosewill RSV-S4-6G Manuale utente

Rosewill

Rosewill RNX-N250PC2 Manuale utente

Rosewill

Rosewill RC-20003 Manuale utente

Rosewill

Rosewill RC-101 Manuale utente

Rosewill

Rosewill RSV-S4-6G Manuale utente

Rosewill

Rosewill RNX-N250PC2 Manuale utente

Rosewill

Rosewill RC500 Manuale utente

Rosewill

Rosewill SATA II 4 Port PCI RAID Card RC217 Manuale utente

Rosewill

Rosewill RC601 Manuale utente

Rosewill

Rosewill RNX-N300 Manuale utente

Rosewill

Rosewill RC-110 Manuale utente

Rosewill

Rosewill RNX-N150PCe Manuale utente

Rosewill

Rosewill RNX-N150PCe Manuale utente

Rosewill

Rosewill RNWD-N9003 PCE Manuale utente

Manuali Scheda PCI popolari di altre marche

ERMA

ERMA SSI 1417 Manuale utente

SIIG

SIIG CyberSerial Dual PCI Istruzioni per il montaggio

Moxa Technologies

Moxa Technologies CP-102E Manuale utente

I-Bus

I-Bus IBC2602 Manuale utente

Exsys

Exsys EX-60102 Manuale utente

Chelsio Communications

Chelsio Communications T5 Series Manuale utente

Conrad Electronic

Conrad Electronic 97 46 71 Manuale utente

Micro Innovations

Micro Innovations USB650A Manuale utente

KTI Networks

KTI Networks KF-310 Manuale utente

Asus

Asus SpaceLink WL230 Manuale utente

SIIG

SIIG SC2475 Manuale utente

TRENDnet

TRENDnet TEW-703PI Manuale utente

Belkin

Belkin F5D7000F Manuale utente

Pericom

Pericom PI7C7100 Manuale utente

ADLINK Technology

ADLINK Technology cPCI-3548 Manuale utente

Digium

Digium TE200 Series Manuale utente

Allo.com

Allo.com 2nd Gen E1/T1/J1 Manuale utente

Western Digital

Western Digital FireWire PCI Adapter Manuale utente