Rosewill RC303 Manuale utente
2-Serial/1-Parallel Port PCI Adapter RC303
User Manual
1
User Manual
2-Serial/1-Parallel Port PCI Adapter RC303
Overview
This PCI I/O card is a dual UART with 1284 printer interface port controller with PCI bus interface
and uses an all-in-one solution from NeMos Technology, which provides superior performance
and unmatched data transfer rates. The most advanced feature is it uses of a single interrupt,
which is set automatically by the host system and share among all on-board I/O ports and
supports printer interface as well as PS2, EPP & ECP modes.
Features
• Chipset: NetMos Nm9835
• OS power: Single 5V operation
• Bus: PCI 2.1s 32bit, 33MHz
• Data Transfer Rate: 1Mbytes/s (serial port)
• Data Transfer Rate: 1.5Mbytes/s (parallel port)
• Selectable receive trigger levels
• PCI compatible Dual UART
• Multi-mode compatible controller (SPP, PS2, EPP& ECP)
• Modem control signals
• On chip oscillator
• 16Byte transmit-receive FIFO (UART)
• Software programmable mode selects
• Programmable baud rate generator
• Support plug & play features and makes installation fast and easy.
• Supports Windows98, Windows95, Windows2000 & Windows NT 4.0.
Installing the PCI I/O controller card into your computer
1. Turn off your computer and all external devices connect it.
2. Remove the computer’s cover. Refer to your computer user’s manual for more details.
3. Find an available PCI slot and remove the metal bracket. Save the bracket screw for later
use.
4. Align the PCI I/O controller horizontally with respect to the PCI slot and insert it into the
slot firmly and evenly. Take care not to force it into the slot. Once you have properly
positioned the PCI I/O controller card into the slot, fasten it to the computer case with the
2
User Manual
2-Serial/1-Parallel Port PCI Adapter RC303
bracket screw you have saved.
5. Replace the computer’s cover.
6. Turn your computer on. You are now read to install the driver!
Driver Installation
Windows 95/98/2000/XP
Once the PCI I/O card is installed and the computer is restarted, Windows will detect the board
and attempt to install driver for it.
1. Start Windows 95/98/2000/XP
2. The“Update Device driver Wizard” will appear, informing you that it has found a “PCI I/O
Card”. Click the “Next” button.
3. Click “Other Location” for Windows 95 or “Specify a location” for Windows 98 to install the
driver.
4. Insert the driver CD in CD-ROM drive (D) and click on the “Browse” button.
3
User Manual
2-Serial/1-Parallel Port PCI Adapter RC303
5. Windows 98/95/2000 will automatically locate the driver in the driver diskette. Click the
“OK” button to continue.
6. Click on the finish button to start copying files from driver diskette.
7. Windows 98/95/2000 will automatically restart in order to update the hardware
configuration.
8. Once Windows 98/95/2000 has restarted, you can now connect your external devices to
the PCI I/O card. To install the driver for the external devices, please refer to the external
device user’s manual.
Windows NT 4.0
Using the existing hard disk controller in your system, you need to install the ATA/100 driver
into Windows NT first. Without ATA/100 driver support, hard drive attached to the ATA/100 IDE
4
User Manual
2-Serial/1-Parallel Port PCI Adapter RC303
controller card can not boot up Windows NT.
Installing drivers with existing Windows NT 4.0
Make sure Windows NT 4.0 is properly installed into your system first.
1. Start Windows NT.
2. Insert Windows NT 4.0 driver diskette (disk 2) into the floppy drive.
3. Select “RUN” option in Windows NT.
4. At the “RUN” option, click on the“Browse” button.
5. At the Browse for Folder window:
Select “Floppy (A)”
Double click on the winnt folder
Select NetMosXXX drivers.exe
Click on the Open button
6. Finally, click the“OK” button
7. Follow the instructions to finish up the driver installation. Your system
will automatically restart in order to complete the driver installation.
Installing DOS Driver
Copy “NMDOSIN.EXE” to your hard disk and run “NMDOSIN.EXE”
Thank you for purchasing Rosewill Product.
Please register your product at www.rosewill.com for complete warranty information and future
support for your product.
Indice
Altri manuali Rosewill Scheda PCI
Rosewill
Rosewill RC-NIC412 Manuale utente
Rosewill
Rosewill RC400 Manuale utente
Rosewill
Rosewill RNX-N150PCe Manuale utente
Rosewill
Rosewill RC501 Manuale utente
Rosewill
Rosewill RNX-N300X Manuale utente
Rosewill
Rosewill RC-209 Manuale utente
Rosewill
Rosewill RC-400 Manuale utente
Rosewill
Rosewill RNX-N300 Manuale utente
Rosewill
Rosewill SATA 150 RAID 2 Port PCI Host RC201 Manuale utente
Rosewill
Rosewill RC205 Manuale utente
Rosewill
Rosewill RC302 Manuale utente
Rosewill
Rosewill RNX-N300 Manuale utente
Rosewill
Rosewill RC500 Manuale utente
Rosewill
Rosewill RC-20002 Manuale utente
Rosewill
Rosewill RNX-N250PC2 Manuale utente
Rosewill
Rosewill RC304-E Manuale utente
Rosewill
Rosewill RC-213 Manuale utente
Rosewill
Rosewill RC-209-EX Manuale utente
Rosewill
Rosewill RNWD?N9003PCE Manuale utente
Rosewill
Rosewill RC214 Manuale utente
