PAGE 3
HANDLING PRECAUTIONS
• The press must be operated on a hard, level surface, away from its edges
to prevent accidental tipping over.
• Work area must be kept clean, tidy, and free of obstructions to the press
moving parts.
• Always attach the power cord to the press first, then plug it into the wall
outlet.
• To unplug the press, turn OFF the power switch, only then remove the plug
from the outlet.
• DO NOT touch the press’s hot surfaces. Use heat-resistant gloves or
tools.
• Keep your hands and other body parts away from the moving parts to
prevent injury.
• This press comes with a power cord that fits into a standard household
3-prong outlet (110V American market and 220V European market). DO
NOT attempt to use the equipment with a two-prong electrical cord or any
other way without proper grounding.
• DO NOT exceed the rated capacity.
• Contact ROSITEK at support@rositek.com if the equipment does not start.
• Always turn the machine OFF and unplug it when done using.
Rositek Technologies
www.rositek.com
© 2021 Rositek
All rights reserved
Email: support@rositek.com
UNPACKING
UNPACKING Keep the packaging materials (cardboard, foam, plastic bags,etc.)
PRECAUTIONS It is designed to hold the weight of the product and should be used in
case you need to return the equipment for repair or warranty maintenance
in the future.
DO NOT attempt to ship the press in a different packing materials.
UNPACKING
INSTRUCTIONS
1. Place the box on a large, sturdy, flat surface.
2. Open the box and remove the instruction manual and all parts that came
with the press.
3. Remove the packaging materials and carefully lift the press out of the box.
4. Examine the heat press after unpacking for any damage. If found one, take
a picture and contact Rositek at support@rositek.com immediately.
USER GUIDE AND TROUBLESHOOTING: RNP4
